Native Instruments Maschine Getting Started Manual page 73

→ Audio signals coming from external sources are now be routed to MASCHINE's modules
where effects can be added. You can also use the audio signals for sampling.
For detailed information on sampling external audio please refer to the Reference Manual.
Hardware
1. First choose an empty Group by selecting it with one of the
2. Select an empty Sound Slot by pressing Button 4 and then one of the pads, let's say
pad 1.
3. Press Button 5 to select
4. By using buttons 5 & 6 or Knob 5 you can select between
and . Select
MIDI OUT
5. Switch back to Control mode by pressing the
button.
CONTROL
6. Now you can select your external source by turning Knob 2. Then select a spare Mod-
ule, lets select Module 2 for example by pressing Button 6.
7. Press +
SHIFT BROWSE
8. Choose an effect and load it using Button 8. Now the external audio will be processed
by the effect.
Software
1. Choose an empty Group by selecting it in the Arranger, then choose one of the Sound
Slots by clicking on it.
2. Select the SOUND tab and then click on Module 1.
(source). After that press
SRC
and press Button 8 to confirm your selection.
INPUT
: now you see the list of the available effects.
The Input Module and Advanced Routing
Applying an Effect to an external audio source
buttons.
GROUP
+
SHIFT BROWSE
,
(NONE) SAMPLER
button again or pressing the
BROWSE
MASCHINE - Getting Started - 73
.
,
INPUT