Native Instruments Maschine Getting Started Manual page 63

5. To select an effect for Module 2, press
6. On the left display, use Knob 1 to set the
for VST/AU plug-ins. The right display now shows the list of the available ef-
PLUG-IN
fects. If you want to load a VST/AU plug-in effect select
7. You can browse through the available effects by turning Knob 5. When you've found
an effect you want to apply, press Button 8 to load it into Module 2. You can also use
buttons 5 and 6 to step through the list and load the effect directly.
8. Switch back to Control mode by pressing the
9. Now you can edit the effect using the knobs!
Software
1.
Click on the SOUND
Sound that you assign the effect to is always the one in focus; in the example under-
neath it's Noise FrostShock.
SHIFT
tab to select the Sound you want to apply an effect to. The actual
+ .
BROWSE
to for MASCHINE FX or
TYPE INTERNAL
.
PLUG-IN
mode button.
CONTROL
MASCHINE - Getting Started - 63
Using Effects & Routing
Applying Effects to a Sound