Native Instruments Maschine Getting Started Manual page 19

(4) GRID button: Select grid sizes for quantization when recording single events, for chang-
ing pattern lengths or switching scenes. Turn the grid off completely for a direct groove
without quantization.
(5) PLAY button: Press the
stop playback. During playback or recording press
Press + a second time to turn the Metronome off.
SHIFT PLAY
(6) REC button: Press
PLAY
second time to stop recording. Press
in — recording will automatically begin after one bar with the metronome on.
(7) ERASE button: When creating music, erasing needs to be as quick and simple as re-
cording, so there is a dedicated button for this! Hold the
and press any number of pads to erase the events of the currently activated pattern on the
fly. Press the button of a Group to erase all its events at once. If you turn any knobs while
holding the button, it will clear the automation of the associated parameter.
ERASE
(8) SHIFT button: While the most important features are accessible through dedicated but-
tons, many shortcuts are available by holding the
several other buttons. You can also use the
crements when entering values with the knobs.
All MASCHINE controller shortcuts are explained in the Hardware Control Reference, avail-
able from the Help menu in the MASCHINE software.
button to activate playback. Press
PLAY
+ at the same time to begin recording. Press
REC
+
SHIFT REC
SHIFT
PLAY
+ to turn the Metronome on.
SHIFT PLAY
to start recording with a one bar count
button during playback
ERASE
button and pressing pads 1-16 or
SHIFT
button to change parameters in fine in-
MASCHINE - Getting Started - 19
Overview
MASCHINE Hardware
a second time to
+ a
PLAY REC