Motion Zone Setup - Vitek VT-HD2x8 User Manual

2-4-4. Motion Zone Setup

Select MOTION ZONE using the control button and select either PARTIAL ZONE or FULL ZONE using the
control button. And press the SEL button.
If FULL ZONE is selected, the motion setting screen is not displayed. Only set the level of sensitivity for
MOTION SENSITIVITY.
FULL ZONE: The motion sensor is active on the whole screen.
PARTIAL ZONE: The motion sensor is active in the set detection frame.
Select the motion detection position using the control button and press the SEL button.
Then the color of the position which is selected will be changed. Press ESC button or right click on the
mouse to return to the DEVICE setup menu.
Figure 2.4.4. Motion Zone Selection Screen
29