Dismantling And Rinsing The Cappuccino Frother; Inserting And Activating The Filter - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Maintenance
Dismantling and rinsing
the cappuccino frother
Inserting and activating
the filter
T Empty the other receptacle and place it under the cappuc-
cino frother again.
T Press the 'Next'
'Milk system is being
the pipe are rinsed with fresh water.
'Please select product:'
T Carefully pull the cappuccino frother down and off.
T Dismantle the cappuccino frother into its individual parts.
T Rinse all parts of the cappuccino frother thoroughly under
running water.
T Reassemble the cappuccino frother.
E Ensure that all individual parts are correctly and firmly con-
nected to ensure correct operation of the cappuccino frother.
T Firmly attach it to the connector.
Your IMPRESSA no longer has to be descaled if you are using the
CLEARYL Pro Blue filter cartridge. If the water hardness is
more, we recommend using the filter cartridge. If you do not know
the hardness of your water, you can find this out first (see Chapter
'Preparing and using for the first time – Determining the water hard-
ness').
If you did not activate the filter cartridge the first time you used the
machine, you can do this now as follows.
E Perform the 'inserting the filter' operation without any inter-
ruptions. This will ensure that your IMPRESSA always produces
its best.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status ( / )'
g T Turn the Rotary Switch until the program item
settings ( / )'
T Press the 'Filter'
'Filter'
T Press the 'Active'
button.
cleaned.', the cappuccino frother and
appears on the display.
is displayed.
is displayed.
button.
button.
° dH or
'Maintenance