Enabling And Disabling Programming Mode - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Permanent settings in programming mode
Program item
'Machine settings
( / )'
'Machine settings ( / )' 'Choose language'
'Information ( / )'
Enabling and disabling
programming mode
Sub-item
'Save energy'
'Switch off after'
'Units'
'Factory setting'
'Display'
'Colour scheme'
'Product counter'
'Maintenance counter'
'Day counter'
'Version'
You can set your IMPRESSA such that programming mode is dis-
abled. When programming mode is disabled, it cannot be accessed
by pressing the P button.
Example: Proceed as follows to disable programming mode.
Precondition: 'Please select product:'
T Remove the water tank.
'Fill water tank'
T Press the Rotary Switch, the P button and the bottom right-
hand button simultaneously for about seconds.
'The machine is locked.'
'Fill water tank'
Programming mode is disabled.
To enable programming mode again, remove the water tank. Then
press the Rotary Switch, the P button and the bottom right-hand
button simultaneously for about
enabled.' is briefly displayed. Programming mode is enabled again.
Explanation
T Select an energy-saving mode.
T Set the time after which the IMPRESSA
should switch off automatically.
T Select the unit for the amount of water.
T Reset the permanently set values of all
products to the factory settings.
T Select your language and the background
color for the display.
T Keep track of all specialty coffees prepared
and view the number of maintenance
programs performed.
is displayed.
is briefly displayed.
seconds. 'The machine is