Preparing two specialty
coffees
Latte macchiato,
cappuccino
To prepare two specialty coffees, either use the product selector or
press the appropriate preparation button twice (within approximately
seconds).
Example: Proceed as follows to prepare two coffees (using product
selector).
T Place two cups under the coffee spout.
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until
k T Press the Rotary Switch.
Coffee preparation starts. The preset amount of water for
coffee flows into the cups.
Preparation stops automatically.
appears on the display.
E Proceed as follows to prepare two cups of coffee at the touch
of a button: Place two cups under the coffee spout. Press the
'Coffee'
button twice (within approximately
start coffee preparation.
Your IMPRESSA can prepare a latte macchiato or cappuccino at the
touch of a button. There is no need to move the glass or cup.
Example: Proceed as follows to prepare one latte macchiato.
Precondition: 'Please select product:'
to the cappuccino frother.
T Place a glass under the cappuccino frother.
T Turn the setting wheel of the cappuccino frother to the Milk
Foam position ü.
T Press the
'Latte macchiato'
'Latte
macchiato', the milk foam is prepared.
Preparation stops automatically when the preset amount of
milk is reached.
E There is a short interval while the hot milk separates from the
milk foam. This allows the typical layers of a latte macchiato
to form. You can choose the length of this interval in program-
ming mode (see Chapter
ming mode – Product settings').
' coffees'
is displayed.
'Please select product:'
seconds) to
is displayed. Milk is connected
button.
'Permanent settings in program-
Preparation