Permanent Settings In Programming Mode - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Permanent settings in programming mode

J WARNING
Program item
'Maintenance status
( / )'
'Product settings ( / )'
'Maintenance settings
( / )'
Hot coffee, hot steam and hot water can cause scalding. Scalding is
a serious burn.
T Use extreme care when handling hot liquid or steam.
T Allow liquid to cool down before drinking.
T In the event of scalding, rinse affected area with cold water an
seek medical attention.
T Keep children AWAY.
Press the P button to enter programming mode. You can navigate
through the program items and permanently save the required set-
tings simply by turning the Rotary Switch and using the multi-func-
tion buttons. The following settings can be made:
Sub-item
'Clean'
'Descale' (only if filter is
not activated)
'Change the filter' (only
if filter is activated)
'Rinse the coffee system'
'Clean the milk system'
'Expert mode'
'product selector'
'One-off settings'
'Lock/enable'
'Filter'
'Water hardness' (only if
filter is not activated)
'Switch-on rinse'
'Rinse the milk system'
Permanent settings in programming mode
Explanation
T Start the required maintenance program
here.
T Select your settings for specialty coffees
and hot water.
T Deactivate the product selector view.
T Specify whether or not to allow one-off
settings during preparation.
T Enable or disable individual products.
T Indicate whether you are operating your
IMPRESSA with or without a CLEARYL Pro
Blue filter cartridge.
T Adjust the water hardness.
T Change the settings for the switch-on
rinse and milk system rinse.