Cleaning The Machine - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Maintenance

Cleaning the machine

J WARNING
T Press the 'Change the filter'
'Change the filter'
E If you do not want to start changing the filter just yet, press
the ' ' button.
T Press the 'Next'
'Change filter'
T Remove and empty the water tank.
T Open the filter holder and remove the old CLEARYL filter car-
tridge.
T Insert the New filter cartridge into the water tank, exerting
slight pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the tank.
T Place a receptacle (at least oz or
water nozzle.
T Press the 'Next'
'Filter is being rinsed.', water flows out of the hot-water noz-
zle.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
E The water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
oz ( ml). The machine heats up.
appears on the display.
After preparations or
prompt you to clean it.
Non-recommended (e.g. liquid) cleaning agents may contain sub-
stances that could damage the machine or leave residues.
T Use only original JURA cleaning tablets. These are specially
formulated for your machine.
button.
button.
button.
switch-on rinses, the IMPRESSA will
ml) under the hot-
'Please select product:'