Hot Water - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Preparation

Hot water

J
CAUTION
T Press any button as soon as there is sufficient coffee in the
cup.
Preparation stops.
set amount of water for one coffee is permanently stored.
'Please select product:'
E You can alter this setting at any time by repeating the above
procedure.
E You can also permanently set the amount for all specialty cof-
fees, hot water and milk in programming mode (see Chapter
'Permanent settings in programming mode – Product set-
tings').
The following temperatures can be selected for preparing hot water:
'Low', 'Normal', 'X high'.
There is a danger of scalding from hot water splashes.
T Avoid direct contact with the skin.
T Place a cup under the hot-water nozzle.
T Press the
'Hot water'
'Hot water' and the temperature are displayed.
E By pressing the
imately seconds) you can set the temperature to your indi-
vidual preference. This setting is not saved.
'Hot water', hot water flows into the cup. Preparation stops
automatically.
'Saved' appears briefly on the display. The
appears on the display.
button.
' < ' or ' > ' button several times (within approx-
'Please select product:' appears on the display.