Jura IMPRESSA XJ9 Professional Instructions For Use Manual page 13

Activating the filter
NOTICE
Milk, sparkling mineral water or other liquids can damage the water
tank or the machine.
T Only fill the water tank with fresh, cold water.
T Press the 'Active'
T Press the 'Save'
'Saved' appears briefly on the display.
'Insert filter'
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle under the cappuccino frother, the coffee
spout and the hot-water nozzle.
T Press the 'Next'
'Filter is being rinsed.', water flows out of the hot-water noz-
zle.
E You can interrupt rinsing of the filter at any time by pressing
any button. Press the Rotary Switch k to continue rinsing of
the filter.
E The water may be slightly discolored. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically.
'System is filling.', the system fills up with water. Water flows
out of the cappuccino frother and the hot-water nozzle. The
operation stops automatically.
'Welcome to JURA'
'Machine is rinsing.', the machine rinses. The operation stops
automatically.
Your IMPRESSA is ready for use.
E The display shows the products you can prepare.
Preparing and using for the first time
button.
button.
button.
'Please select product:' appears on the display.