Daily Operation; Switching On; Daily Maintenance - Jura IMPRESSA XJ9 Professional Instructions For Use Manual

Daily operation

Switching on

Daily maintenance

When the IMPRESSA is switched on, it automatically prompts you
to perform the rinse operation. Start the rinse operation by pressing
the Rotary Switch k. In programming mode you can change this
setting so that the machine starts the switch-on rinse automatically
(see Chapter 'Permanent settings in programming mode – Main-
tenance settings').
Precondition: Your IMPRESSA is switched on at the power switch.
T Place a receptacle under the coffee spout.
Q T Press the On/Off button to switch the IMPRESSA on.
'Welcome to JURA'
up.
'Please press the Rotary Switch.'
k T Press the Rotary Switch.
The machine rinses. The operation stops automatically.
'Please select product:'
To ensure that you get many years of reliable service out of your
IMPRESSA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the cappuccino frother (see Chapter
'Maintenance – Dismantling and rinsing the cappuccino
frother').
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfiber cloth).
appears on the display. The machine heats
appears on the display.
Daily operation