Automatic Temperature Control (Atc) - Chrysler 2014 Grand Cherokee SRT Owner's Manual

Recirculation
When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illu-
minate when this button is selected. Push the
button a second time to turn off the Recircula-
tion mode and allow outside air into the vehicle.
NOTE:
In cold weather, use of Recirculation mode
may lead to excessive window fogging. The
recirculation feature may be unavailable
(soft button greyed out). The Recirculation
mode is not allowed in Defrost mode to
improve window clearing operation. Recir-
culation will be disabled automatically if this
mode is selected. Attempting to use Recir-
culation while in this mode will cause the
LED in the control button to blink and then
turn off.
196
PAGE POSITION: 198
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1

Automatic Temperature Control (ATC)

Automatic Operation
1. Press the AUTO hard-key or soft-key button
(4) on the Automatic Temperature Control (ATC)
Panel.
2. Next, adjust the temperature you would like
the system to maintain by adjusting the driver
and passenger temperature hard or soft control
buttons (7, 8, 13, 14). Once the desired tem-
perature is displayed, the system will achieve
and automatically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the settings.
You will experience the greatest efficiency by
simply allowing the system to function automati-
cally.
NOTE:
• It is not necessary to move the tempera-
ture settings for cold or hot vehicles. The
system automatically adjusts the tem-
perature, mode, and blower speed to pro-
vide comfort as quickly as possible.
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
• The temperature can be displayed in U.S.
or Metric units by selecting the US/M
customer-programmable feature. Refer to
the "Uconnect® System Settings" in this
section of the manual.
To provide you with maximum comfort in the
Automatic mode, during cold start-ups the
blower fan will remain on low until the engine
warms up. The blower will increase in speed
and transition into Auto mode.
Manual Operation
The system allows for manual selection of
blower speed, air distribution mode, A/C status
and recirculation control.
The blower fan speed can be set to any fixed
speed by adjusting the blower control. The fan
will now operate at a fixed speed until additional
speeds are selected. This allows the front oc-
cupants to control the volume of air circulated in
the vehicle and cancel the Auto mode.
The operator can also select the direction of the
airflow by selecting one of the available mode
settings. A/C operation and Recirculation con-
trol can also be manually selected in Manual
operation.