Chrysler 2014 Grand Cherokee SRT Owner's Manual page 181

• Lane Departure Warning (LDW) — If
Equipped
The Lane Departure Warning (LDW) sets the
distance at which the steering wheel will provide
feedback for potential lane departures. The
LDW sensitivity can be set to provide either an
early, medium or late warning zone start point.
To make your selection, touch the Lane Depar-
ture Warning soft-key, until a check-mark ap-
pears next to setting, indicating that the setting
had been selected. Touch the back arrow soft-
key to return to the previous menu.
• Lane Departure Warning (LDW)
Strength — If Equipped
When this feature is selected, it sets the
strength of the steering wheel feedback for
potential lane departures. The amount of direc-
tional torque the steering system can apply to
the steering wheel to correct for vehicle lane
departure can be set at Low, Medium or High.
To make your selection, touch the Lane Depar-
ture Warning soft-key until a check-mark ap-
pears next to setting, indicating that the setting
had been selected. Touch the back arrow soft-
key to return to the previous menu.
PAGE POSITION: 181
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
• ParkSense®
The ParkSense® system will scan for objects
behind the vehicle when the transmission shift
lever is in REVERSE and the vehicle speed is
less than 11 mph (18 km/h). It will provide an
alert (audible and/or visual) to indicate the prox-
imity to other objects. The system can be en-
abled with Sound Only, or Sound and Display.
To change the ParkSense® status, touch and
release the Sound Only or Sounds and Display
button. Then touch the arrow back soft-key.
Refer to "ParkSense®" in "Understanding The
Features Of Your Vehicle" for system function
and operating information.
• Front ParkSense® Chime Volume
The Front ParkSense® Chime Volume settings
can be selected from the EVIC or Uconnect®
System — if equipped. The chime volume set-
tings include LOW, MEDIUM, and HIGH. The
factory default volume setting is MEDIUM. To
make your selection, touch the ParkSense®
Front Chime Volume soft-key, until a check-
mark appears next to setting, indicating that the
setting had been selected. Touch the back
arrow soft-key to return to the previous menu.
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
ParkSense® will retain its last known configu-
ration state through ignition cycles.
• Rear ParkSense® Chime Volume
The Rear ParkSense® Chime Volume settings
can be selected from the EVIC or Uconnect®
System — if equipped. The chime volume set-
tings include LOW, MEDIUM, and HIGH. The
factory default volume setting is MEDIUM. To
make your selection, touch the ParkSense®
Rear Chime Volume soft-key, until a check-
mark appears next to setting, indicating that the
setting had been selected. Touch the back
arrow soft-key to return to the previous menu.
ParkSense® will retain its last known configu-
ration state through ignition cycles.
• ParkSense® Park Assist Braking
When this feature is selected, the park assist
system will detect objects located behind the
vehicle and utilize autonomous braking to stop
the vehicle. To make your selection, touch the
ParkSense® Park Assist Braking soft-key, until
a check-mark appears next to setting, indicating
that the setting had been selected. Touch the
back arrow soft-key to return to the previous
179