Overtake Aid; Adaptive Cruise Control (Acc) Menu - Chrysler 2014 Grand Cherokee SRT Owner's Manual

A Proximity Warning will alert the driver if ACC
predicts that its maximum braking level is not
sufficient to maintain the set distance. If this
occurs, a visual alert "BRAKE" will flash in the
EVIC and a chime will sound while ACC contin-
ues to apply its maximum braking capacity.
When this occurs, you should immediately ap-
ply the brakes as needed to maintain a safe
distance from the vehicle ahead.
106
PAGE POSITION: 108
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
Brake Alert

Overtake Aid

When driving with ACC engaged and following
a target vehicle, the system will provide an
additional acceleration to assist in passing ve-
hicles in front. This additional acceleration is
triggered when the driver utilizes the left turn
signal. In locations with left hand drive traffic,
Overtake Aid is active only when passing on the
left hand side of the Target vehicles.
When a vehicle goes from a location with left
hand drive traffic to a location with right hand
drive traffic, the ACC system will automatically
detect traffic direction. In this condition, Over-
take Aid is active only when passing on the right
side of the Target vehicle. This additional accel-
eration is triggered when the driver utilizes the
right turn signal. In this condition the ACC
system will no longer provide Overtake Aid on
the left side until it determines that the vehicle
has moved back to a location with left hand
drive traffic.
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_

Adaptive Cruise Control (ACC) Menu

The EVIC displays the current ACC system
settings. The EVIC is located in the center of the
instrument cluster. The information it displays
depends on ACC system status.
Press the ADAPTIVE CRUISE CONTROL (ACC)
ON/OFF button (located on the steering wheel)
until one of the following displays in the EVIC:
Adaptive Cruise Control Off
When ACC is deactivated, the display will read
"Adaptive Cruise Control Off."
Adaptive Cruise Control Ready
When ACC is activated but the vehicle speed
setting has not been selected, the display will
read "Adaptive Cruise Control Ready."
Press the SET + or the SET- button (located on
the steering wheel) and the following will display
in the EVIC:
ACC SET
When ACC is set, the set speed will continue to
display in the lower right hand corner of the cluster.