Chrysler 2014 Grand Cherokee SRT Owner's Manual page 114

To Set A Desired Speed
Turn the Normal (Fixed Speed) Cruise Control
ON. When the vehicle has reached the desired
speed, press the SET (+) or SET (-) button and
release. Release the accelerator and the ve-
hicle will operate at the selected speed. Once a
speed has been set a message CRUISE CON-
TROL SET TO MPH/KM will appear indicating
what speed was set. An indicator CRUISE will
also appear and stay on in the instrument
cluster when the speed is set.
To Vary The Speed Setting
When the Normal (Fixed Speed) Cruise Control
is set, you can increase speed by pushing the
SET (+) button. If the button is continually
pressed, the set speed will continue to increase
until the button is released, then the new set
speed will be established.
Pressing the SET (+) button once will result in a
1 mph (1 km/h) increase in set speed. Each
subsequent tap of the button results in an
increase of 1 mph (1 km/h).
While the Normal (Fixed Speed) Cruise Control
is set, you can increase the set speed by
pressing and holding the SET + button. If the
112
PAGE POSITION: 114
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
button is continually pressed, the set speed will
continue to increase in 5 mph (5 km/h) incre-
ments until the button is released. The increase
in set speed is reflected in the EVIC display.
To decrease speed while the Normal (Fixed
Speed) Cruise Control is set, push the SET (-)
button. If the button is continually held in the
SET (-) position, the set speed will continue to
decrease until the button is released. Release
the button when the desired speed is reached,
and the new set speed will be established.
Pressing the SET (-) button once will result in a
1 mph (1 km/h) decrease in set speed. Each
subsequent tap of the button results in a de-
crease of 1 mph (1 km/h).
While the Normal (Fixed Speed) Cruise Control
is set, the set speed can be decreased by
pressing and holding the SET - button. If the
button is continually pressed, the set speed will
continue to decrease in 5 mph (5 km/h) incre-
ments until the button is released. The decrease
in set speed is reflected in the EVIC display.
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
To Cancel
The following conditions will cancel the Normal
(Fixed Speed) Cruise Control without clearing
the memory:
• You softly tap or depress the brake pedal.
• You press the CANCEL button.
• The Electronic Stability Control/Traction Con-
trol System (ESC/TCS) activates.
• The vehicle parking brake is applied.
• The braking temperature exceeds normal
range (overheated).
• The shift lever is removed from the Drive
position.
To Resume Speed
To resume a previously set speed, push the
RES button and release. Resume can be used
at any speed above 19 mph (30 km/h).