Chrysler 2014 Grand Cherokee SRT Owner's Manual page 195

4. AUTO Operation Button
Automatically controls the interior cabin tem-
perature by adjusting airflow distribution and
amount. Performing this function will cause the
ATC to switch between manual mode and au-
tomatic modes. Refer to "Automatic Operation"
for more information.
5. Front Defrost Button
Press and release to change the current airflow
setting to Defrost mode. The indicator illumi-
nates when this feature is ON. Performing this
function will cause the ATC to switch into
manual mode. The blower speed may increase
when Defrost mode is selected. If the front
defrost mode is turned off the climate system
will return the previous setting.
6. Rear Defrost Button
Press and release this button to turn on the rear
window defroster and the heated outside mir-
rors (if equipped). An indicator will illuminate
when the rear window defroster is on. The rear
window defroster automatically turns off after
10 minutes.
PAGE POSITION: 195
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
• Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild wash-
ing solution, wiping parallel to the heating
elements. Labels can be peeled off after
soaking with warm water.
• Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
• Keep all objects a safe distance from the
window.
7. Passenger Temperature Control Up Button
Provides the passenger with independent tem-
perature control. Push the hard-key button for
warmer temperature settings or on the touch-
screen, press and slide the soft-key tempera-
ture bar towards the red arrow soft-key for
warmer temperature settings.
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
NOTE:
Pressing this button while in Sync mode will
automatically exit Sync.
8. Passenger Temperature Control Down
Button
Provides the passenger with independent tem-
perature control. Push the hard-key button for
cooler temperature settings or on the touch-
screen, press and slide the soft-key tempera-
ture bar towards the blue arrow soft-key for
cooler temperature settings.
NOTE:
Pressing this button while in Sync mode will
automatically exit Sync.
9. SYNC
Press the Sync soft-key to toggle the Sync
feature On/Off. The Sync indicator is illuminated
when this feature is enabled. Sync is used to
synchronize the passenger temperature setting
with the driver temperature setting. Changing
the passenger temperature setting while in
Sync will automatically exit this feature.
193