Chrysler 2014 Grand Cherokee SRT Owner's Manual page 162

Stored Messages
Press and release the UP arrow
button until the Messages display
icon is highlighted in the EVIC. This
feature shows the number of stored
warning messages. Pressing the
RIGHT arrow button will allow you to
see what the stored messages are.
Audio
Press and release the UP or DOWN
arrow button until the Audio display
icon is highlighted in the EVIC.
Press and release the RIGHT arrow
button to scroll through the sub-
menus and press the OK button
display the active source.
160
PAGE POSITION: 162
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
SRT
WARNING!
Measurement of vehicle statistics with the per-
formance pages is intended for off-highway or
off-road use only and should not be done on
any public roadways. It is recommended that
these features be used in a controlled environ-
ment and within the limits of the law. The
capabilities of the vehicle as measured by the
performance pages must never be exploited in
a reckless or dangerous manner which can
jeopardize the users safety or the safety of
others. Only a safe, attentive, and skillful driver
can prevent accidents.
The Performance Features include the follow-
ing:
• 0-60 mph (0-100 km/h)
• Braking Distance
• 1/8 Mile
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
• 1/4 Mile
• Instantaneous G-Force
• Peak G-Force
• Launch Mode – If Equipped
To access, press and release either the UP or
DOWN arrow button until "SRT" appears in the
EVIC, then press and release the RIGHT arrow
button to cycle through the features. Press the
OK button to select a feature.
The following describes each feature and its
operation:
Timers
0-60 mph (0-100 km/h)
When selected, this screen displays the time it
takes for the vehicle to go from 0 to 60 mph
(0 to 100 km/h) within 10 seconds.
• The feature will "ready" when the vehicle
speed is at 0 mph (0 km/h). The word
"READY" will appear when conditions are
met for the event to begin.