Customer Programmable Features - Uconnect® 8.4 Settings - Chrysler 2014 Grand Cherokee SRT Owner's Manual

• Regional
When this feature is selected it forces regional
service-following enabling automatic switching
to network stations. To change the Regional
setting touch the Off or On soft-key. A check
mark will appear in the box when selected. Then
touch the arrow back soft-key.
Restore Settings
After pressing the Restore Settings soft-key the
following settings will be available.
• Restore Settings
When this feature is selected it will reset Dis-
play, Clock, Audio, and Radio Settings to their
default. To restore the settings to their default
setting touch the Yes or No soft-key. A check
mark will appear in the box when selected. Then
touch the arrow back soft-key.
Clear Personal Data
After pressing the Clear Personal Data Settings
soft-key the following settings will be available.
• Clear Personal Data
When this feature is selected it will remove
personal data including Bluetooth® devices and
176
PAGE POSITION: 178
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
presets. To Clear Personal Data touch the Yes
or No soft-key. A check mark will appear in the
box when selected. Then touch the arrow back
soft-key.
Customer Programmable Features
— Uconnect® 8.4 Settings
Press the Apps soft-key, then press the Settings
soft-key to display the menu setting screen. In
this mode the Uconnect® system allows you to
access programmable features that may be
equipped such as Display, Clock, Safety/
Assistance, Lights, Doors & Locks, Auto-On
Comfort & Remote Start, Engine Off Operation,
Compass Settings, Audio and Phone/Bluetooth.
NOTE:
Only one touchscreen area may be selected
at a time.
When making a selection, press the soft-key to
enter the desired mode. Once in the desired
mode press and release the preferred setting
until a check-mark appears next to the setting,
showing that setting has been selected. Once
the setting is complete either press the Back
Arrow soft-key or the Back hard-key to return to
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
the previous menu or press the X soft-key to
close out of the settings screen. Pressing the
Up or Down Arrow soft-keys on the right side of
the screen will allow you to toggle up or down
through the available settings.
Display
After pressing the Display soft-key the following
settings will be available.
• Display Mode
When in this display you may select one of the
auto display settings. To change Mode status,
touch and release the Day, Night or Auto soft-
key. Then touch the arrow back soft-key.
• Display Brightness With Headlights ON
When in this display, you may select the bright-
ness with the headlights on. Adjust the bright-
ness with the + and – setting soft-keys or by
selecting any point on the scale between the +
and – soft-keys. Then touch the arrow back
soft-key.