Chrysler 2014 Grand Cherokee SRT Owner's Manual page 182

menu. Refer to "ParkSense® Rear Park Assist" in
"Understanding The Features Of Your Vehicle" for
system function and operating information.
• Tilt Mirrors In Reverse
When this feature is selected, the exterior
sideview mirrors will tilt downward when the
ignition is in the RUN position and the transmis-
sion shift lever is in the REVERSE position. The
mirrors will move back to their previous position
when the transmission is shifted out of RE-
VERSE. To make your selection, touch the Tilt
Mirrors In Reverse soft-key, until a check-mark
appears next to setting, indicating that the set-
ting had been selected. Touch the back arrow
soft-key to return to the previous menu.
• Paddle Shifting
Selecting this feature enables the use of steer-
ing wheel paddle switches for shifting in manual
mode. To make your selection, touch the Paddle
Shifting soft-key, until a check-mark appears
next to setting, indicating that the setting had
been selected. Touch the back arrow soft-key to
return to the previous menu.
180
PAGE POSITION: 182
1382968-en-2014_GRAND_CHEROKEE_SRT_EE+14WK742-126-ENG-AA/DIV_Owners_Manual_v1
• Blind Spot Alert
When this feature is selected, the Blind Spot Alert
feature Provides alerts, visual and/or audible, to
indicate objects in your blind spot. The Blind Spot
Alert feature can be activated in "Lights" mode.
When this mode is selected, the Blind Spot Moni-
tor (BSM) system is activated and will only show a
visual alert in the exterior mirrors. When "Lights &
Chime" mode is activated, the Blind Spot Monitor
(BSM) will show a visual alert in the exterior
mirrors as well as an audible alert when the turn
signal is on. When "Off" is selected, the Blind Spot
Monitor (BSM) system is deactivated. To change
the Blind Spot Alert status, touch the Off, Lights or
Lights & Chime soft-key. Then touch the arrow
back soft-key.
NOTE:
If your vehicle has experienced any damage
in the area where the sensor is located, even
if the fascia is not damaged, the sensor may
have become misaligned. Take your vehicle
to an authorized dealer to verify sensor
alignment. Having a sensor that is mis-
aligned will result in the BSM not operating
to specification.
JOB: @zeta.tweddle.com/InfoShareAuthoroChrysler/CLS_InfoShareAuthoroChrysler/GRP_Owners_Manual/JOB_
• ParkView® Backup Camera
Your vehicle may be equipped with the
ParkView® Rear Back Up Camera that allows
you to see an on-screen image of the rear
surroundings of your vehicle whenever the shift
lever is put into REVERSE. The image will be
displayed on the radio touchscreen display
along with a caution note to "check entire sur-
roundings" across the top of the screen. After
five seconds, this note will disappear. The
ParkView® camera is located on the rear of the
vehicle above the rear License plate. To make
your selection, touch the ParkView® Backup
Camera soft-key, until a check-mark appears
next to setting, indicating that the setting had
been selected. Touch the back arrow soft-key to
return to the previous menu.
• ParkView® Backup Camera Active
Guidelines
Your vehicle may be equipped with the ParkView®
Rear Back Up Camera Active Guidelines that al-
lows you to see active guidelines over the
ParkView Back up camera display whenever the
shift lever is put into REVERSE. The image will be
displayed on the radio touchscreen display along