Table of Contents
Advertisement
Climate Control Functions
A/C (Air Conditioning)
The Air Conditioning (A/C) button allows the op-
erator to manually activate or deactivate the air
conditioning system. When the air conditioning sys-
tem is turned on, cool dehumidified air will flow
through the outlets into the cabin. For improved
fuel economy, push A/C button to turn off the air
conditioning and manually adjust the blower and
airflow mode settings. Also, make sure to select only
Panel, Bi-Level, or Floor modes.
NOTE:
• If fog or mist appears on the windshield or side
glass, select Defrost mode and adjust blower
speed if needed.
• If your air conditioning performance seems lower
than expected, check the front of the A/C con-
denser (located in front of the radiator), for an
accumulation of dirt or insects. Clean with a gentle
water spray from the front of the radiator and
through the condenser.
MAX A/C
MAX A/C sets the control for maximum cooling
performance.
Press and release to toggle between MAX A/C and
the prior settings. The button illuminates when
MAX A/C is on.
In MAX A/C, the blower level and mode position
can be adjusted to desired user settings. Pressing
other settings will cause the MAX A/C operation to
switch to the selected setting and MAX A/C to exit.
Recirculation
In cold weather, use of Recirculation mode may lead
to excessive window fogging. The Recirculation
feature may be unavailable (button on the touch-
screen greyed out) if conditions exist that could
create fogging on the inside of the windshield.
Automatic Temperature Control
(ATC)
Automatic Operation
1. Push the AUTO button on the faceplate, or the
AUTO button on the touchscreen on the Auto-
matic Temperature Control (ATC) Panel.
2. Next, adjust the temperature that you would like
the system to maintain by adjusting the driver
and passenger temperature control buttons.
Once the desired temperature is displayed, the
system will achieve and automatically maintain
that comfort level.
3. When the system is set up for your comfort level,
it is not necessary to change the settings. You will
experience the greatest efficiency by simply al-
lowing the system to function automatically.
NOTE:
• It is not necessary to move the temperature set-
tings for cold or hot vehicles. The system auto-
matically adjusts the temperature, mode, and
blower speed to provide comfort as quickly as
possible.
• The temperature can be displayed in U.S. or Met-
ric units by selecting the US/Metric customer-
programmable feature. Refer to the "Uconnect
Settings" in "Multimedia" in your Owner's Manual
for further information.
37
Advertisement
Table of Contents
