Uconnect Settings; Customer Programmable Features - Uconnect 4C/4C Nav Settings - Chrysler 300 SRT 2019 Owner's Manual

NOTE:
• FCA US LLC or your dealer may contact you
directly regarding software updates.
• To help further improve vehicle security and
minimize the potential risk of a security
breach, vehicle owners should:
• Routinely check
www.driveuconnect.com/support/
software-update.html to learn about avail-
able Uconnect software updates.
• Only connect and use trusted media devices
(e.g. personal mobile phones, USBs, CDs).
Privacy of any wireless and wired communica-
tions cannot be assured. Third parties may
unlawfully intercept information and private
communications without your consent. For fur-
ther information, refer to "Onboard Diagnostic
System (OBD II) Cybersecurity" in "Getting To
Know Your Instrument Panel".
240

UCONNECT SETTINGS

The Uconnect system uses a combination of
buttons on the touchscreen and buttons on the
faceplate located on the center of the instrument
panel that allows you to access and change the
customer programmable features.
CAUTION!
Do NOT attach any object to the touch-
screen, doing so can result in damage to the
touchscreen.
Uconnect 4C/4C NAV Buttons On The
Touchscreen And Buttons On The Faceplate
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
Customer Programmable Features
— Uconnect 4C/4C NAV Settings
Press the "Apps " button (if equipped), and
then press the "Settings" button on the touch-
screen to display the menu setting screen. In
this mode, the Uconnect system allows you to
access programmable features that may be
equipped such as Language, Display, Units,
Voice, Clock & Date, Safety & Driving Assis-
tance, Mirrors & Wipers, Lights, Doors & Locks,
Auto-On Comfort, Key Off Options, Audio,
Phone/Bluetooth, Reset, and System Informa-
tion.
NOTE:
Depending on the vehicle's options, feature
settings may vary.
When making a selection, press the button on
the touchscreen to enter the desired mode.
Once in the desired mode, press and release
the preferred setting "option" until a check-mark
appears next to the setting, showing that setting
has been selected. Once the setting is com-
plete, press the "X" button on the touchscreen to
close out of the settings screen. Pressing the up
or down arrow button on the right side of the
screen will allow you to toggle up or down
through the available settings.