Download Print this page

Chrysler Town & Country 2016 Owner's Manual

Chrysler Town & Country 2016 Owner's Manual

Hide thumbs Also See for Town & Country 2016:

Owner's manual (716 pages)

Table of Contents

Advertisement

Quick Links

Download this manual

Town & Country

2 0 1 6

O W N E R ' S M A N U A L

Table of Contents

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the Town & Country 2016 and is the answer not in the manual?

Questions and answers

Summary of Contents for Chrysler Town & Country 2016

Page 1 Town & Country 2 0 1 6 O W N E R ’ S M A N U A L...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new FCA US LLC nicians and genuine MOPAR® parts, and cares about vehicle. Be assured that it represents precision workman- your satisfaction.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision, bodily injury and/or death. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. Stamped VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Rearming Of The System ....18 A WORD ABOUT YOUR KEYS ... . .12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Sound Horn With Remote Lock ... .25 ▫ How To Use Remote Start ....32 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 ▫ Power Liftgate — If Equipped ... . .59 SAFETY TIPS ......125 ▫...
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS When released from the START position, the switch automatically returns to the ON/RUN position. Your vehicle is equipped with a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a Wireless Ignition Node (WIN) with integral ignition switch.
Page 15: Key Fob
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 Key Fob The Key Fob operates the ignition switch. Insert the square end of the Key Fob into the ignition switch located on the instrument panel and rotate to the desired posi- tion.
Page 16: Removing Key Fob From Ignition
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Removing Key Fob From Ignition Place the gear selector in PARK. Turn the Key Fob to the OFF position and then remove the Key Fob. NOTE: Power window switches will also remain active for up to 10 minutes after the ignition switch has been turned to OFF, depending upon the accessory delay setting.
Page 17: Key-In-Ignition Reminder
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 WARNING! (Continued) CAUTION! • Never leave children alone in a vehicle, or with An unlocked vehicle is an invitation. Always remove access to an unlocked vehicle. the Key Fob from the ignition and lock all doors •...
Page 18: Sentry Key
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE will cause the reminder chime to sound. Refer to “Start- After turning the ignition switch to the ON/RUN posi- ing Procedures” in “Starting And Operating” for further tion, the Vehicle Security Light will turn on for three information.
Page 19: Replacement Keys
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 CAUTION! CAUTION! The Sentry Key Immobilizer system is not compat- Always remove the Key Fobs from the vehicle and ible with some aftermarket remote starting systems. lock all doors when leaving the vehicle unattended. Use of these systems may result in vehicle starting Duplication of Key Fobs may be performed at an autho- problems and loss of security protection.
Page 20: General Information
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information VEHICLE SECURITY ALARM — IF EQUIPPED The following regulatory statement applies to all Radio The Vehicle Security Alarm monitors the vehicle doors Frequency (RF) devices equipped in this vehicle: for unauthorized entry and the ignition switch for unau- thorized operation.
Page 21: To Arm The System
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 • Push the LOCK button on the exterior Passive Entry present, the Vehicle Security Alarm will ignore that condition and monitor the remaining doors and ignition. Door Handle with a valid Key Fob available in the same exterior zone (refer to Keyless Enter-N-Go in To Arm The System Things To Know Before Starting Your Vehicle for...
Page 22 20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Cycle the vehicle ignition system out of the OFF • When the Vehicle Security Alarm is armed, the interior position. power door lock switches will not unlock the doors. • For vehicles equipped with Keyless Enter-N-Go, The Vehicle Security Alarm is designed to protect your push the Keyless Enter-N-Go START/STOP button vehicle.
Page 23: Tamper Alert
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 Tamper Alert The lights will fade to off after approximately 30 seconds, or they will immediately fade to off once the ignition If something has triggered the Vehicle Security Alarm in switch is turned to ON/RUN from the OFF position. your absence, the horn will sound three times, and the exterior lights blink three times when you unlock the The front courtesy overhead console and door courtesy...
Page 24: Remote Keyless Entry (Rke) - If Equipped
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If your vehicle is equipped with illuminated NOTE: Inserting the Key Fob with RKE transmitter into approach lights under the outside mirrors, they can be the ignition switch disables the system from responding turned off by using the Electronic Vehicle Information to any button pushed from that RKE transmitter.
Page 25 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 (optional). Some features can be programmed to the customers preferences. For example, flash headlights or sound horn on LOCK. Key Fob With Three-Button RKE Transmitter Seven-button RKE transmitters will provide functions that allow the same basic operation as the three-button, but may also be used to operate the power liftgate Key Fob With Seven-Button RKE Transmitter (optional), power sliding doors, and Remote Start feature...
Page 26: Remote Unlock Doors And Liftgate
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • For vehicles not equipped with the EVIC, the Remote Remote Unlock Doors And Liftgate Unlock feature can be enabled or disabled by perform- Push and release the UNLOCK button on the RKE ing the following steps: transmitter once to unlock the driver’s side or twice to unlock all doors and liftgate.
Page 27: Sound Horn With Remote Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 • For vehicles not equipped with the EVIC, perform the NOTE: Pushing the LOCK button on the RKE transmit- ter while you are inside the vehicle will activate the following steps: Vehicle Security Alarm. Opening a door with the Vehicle 1.
Page 28: Using The Panic Alarm
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: Pushing the LOCK button on the RKE transmit- NOTE: ter while you are in the vehicle will activate the Vehicle • When you turn off the Panic Alarm by pushing the Security Alarm.
Page 29: Power Open/Close Left Power Sliding Door - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 If equipped with a rear interior switch on the left rear If the vehicle is locked and the Vehicle Security Alarm is pillar, pushing this switch once will close the liftgate only. armed, pushing the LEFT Power Sliding Door button The liftgate cannot be opened from this switch.
Page 30: Turn Off Flash Lights With Rke Lock - If Equipped
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Turn Off Flash Lights With RKE Lock — If than 10 seconds. Then, push and hold the LOCK Equipped button while still holding the UNLOCK button. This feature will cause the turn signal lights to flash when 3.
Page 31: Programming Additional Transmitters
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 Programming Additional Transmitters 1. Remove the emergency key by sliding the mechanical latch at the top of the RKE transmitter sideways with If you do not have a programmed RKE transmitter, your thumb and then pull the key out with your other contact your authorized dealer for details.
Page 32 30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 2. Insert the tip of the emergency key or a #2 flat blade screwdriver into the slot and gently pry the two halves of the RKE transmitter apart. Make sure not to damage the seal during removal.
Page 33: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 4. To assemble the RKE transmitter case, snap the two REMOTE STARTING SYSTEM — IF EQUIPPED halves together. This system uses the Remote Keyless Entry General Information (RKE) transmitter to start the engine conve- The following regulatory statement applies to all Radio niently from outside the vehicle while still Frequency (RF) devices equipped in this vehicle:...
Page 34: How To Use Remote Start
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Vehicle theft alarm not active How To Use Remote Start • Ignition in Off position (Keyless Enter-N-Go) All of the following conditions must be met before the engine will Remote Start: WARNING! •...
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 Remote Start Abort Message On Electronic Vehicle To Enter Remote Start Mode Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the Push and release the REMOTE START button vehicle fails to remote start or exits remote start prema- on the RKE transmitter twice within five sec- turely:...
Page 36 34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • The engine can be started two times (15 minutes equipped). Then, prior to the end of the 15-minute cycle, cycles) with the RKE transmitter. However, the igni- push and release the START/STOP button. If the START/ tion switch must be cycled by pushing the START/ STOP button is not present, insert the Key Fob into the STOP button twice (or the ignition switch must be...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 • The hazard switch is pushed. Key To Run” will display in the EVIC until you insert and turn the key to ON/RUN position. Refer to • The gear selector is moved out of PARK. “Electronic Vehicle Information Center (EVIC)”...
Page 38: Door Locks
36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When To Reset Remote Start The vehicle can be started remotely up to a maximum of two times. The vehicle is also allowed a maximum of one failed start, where the Remote Starting sequence was initiated but the engine stopped cranking without start- ing.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 WARNING! (Continued) • Before exiting a vehicle, always shift the transmis- sion into PARK, apply the parking brake, turn the engine OFF, remove the key fob from the ignition and lock your vehicle. If equipped with Keyless Enter-N-Go, always make sure the keyless ignition node is in “OFF”...
Page 40: Power Door Locks - If Equipped
38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) warned not to touch the parking brake, brake pedal or the gear selector. • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children, and do not leave the ignition of a vehicle equipped with Keyless Enter-N-Go in the ACC or ON/RUN mode.
Page 41 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 operate. A chime will sound if the Key Fob is in the If you push the power door lock switch while the sliding ignition switch and a door is open, as a reminder to door is open, the sliding door will lock.
Page 42: Keyless Enter-N-Go
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The Unlock Doors Automatically On Exit feature will not NOTE: operate if there is any manual operation of the power • Passive Entry may be programmed ON/OFF. Refer to door locks (lock or unlock). “Electronic Vehicle Information Center (EVIC)/ On vehicles equipped with the optional Electronic Ve- Personal...
Page 43 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 • If the vehicle is unlocked by Passive Entry and no door is opened within 60 seconds, the vehicle will re-lock and if equipped will arm the security alarm. To Unlock From The Driver’s Side: With a valid Passive Entry RKE transmitter within 5 ft (1.5 m) of the driver’s door handle, grab the driver’s front door handle to unlock the vehicles door’s automatically.
Page 44 42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If “Unlock All Doors 1st Press” is programmed, Preventing Inadvertent Locking Of Passive Entry RKE all doors will unlock when you grab hold of the driver’s Transmitter In Vehicle front door handle. To select between “Unlock Driver To minimize the possibility of unintentionally locking a Door 1st Press”...
Page 45 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 NOTE: On the third attempt ALL doors will lock and To Lock The Vehicle’s Doors the Passive Entry RKE transmitter can be locked in the With one of the vehicle’s Passive Entry RKE transmitters vehicle.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do NOT grab the door handle, when pushing the door NOTE: handle button. This could unlock the door(s). • After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 47: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 General Information WINDOWS The following regulatory statement applies to all radio Power Vent Windows — If Equipped frequency (RF) devices equipped in this vehicle: The Power Vent Window Switch located on the driver’s This device complies with Part 15 of the FCC Rules and door trim panel allows the driver to operate the two vent with Industry Canada licence-exempt RSS standard(s).
Page 48: Power Windows
46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Windows NOTE: Power Window switches will also remain active for up to 10 minutes after the ignition switch has been You can control either the front or rear windows using turned to OFF, depending upon the accessory delay switches located on the driver’s door trim panel.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 switches will operate only when the ignition switch is in the ON/RUN or ACC position and during power acces- sory delay. Power Window Lockout Switch Front Passenger Power Window Switch There is a single switch on the front passenger’s door Front Passenger Power Door Switches trim panel which operates the passenger door window and a set of switches that lock and unlock all doors.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Auto-Down Feature — If Equipped Auto Up Feature With Anti-Pinch Protection — If Equipped The front window switches may be equipped with an Auto-Down feature. Push the window switch past the The front driver and front passenger switches may be detent, release, and the window will go down automati- equipped with an Auto Up feature.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 • Any impact due to rough road conditions may trigger 2. Push the window switch down firmly to the second the auto reverse function unexpectedly during auto- detent to open the window completely and continue closure.
Page 52: Sliding Side Door
50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ears. Your vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions. This is a normal occur- rence and can be minimized. If the rear windows are open and buffeting occurs, open the front and rear windows together to minimize the buffeting.
Page 53: Power Sliding Side Door - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 To keep your door operating properly, observe the fol- NOTE: The left side sliding door cannot be opened lowing guidelines: while the fuel door is open. This feature operates only when the sliding door is fully closed prior to opening the •...
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Push the button on the RKE transmitter twice within five seconds to open a power sliding door. When the door is fully open, pushing the button twice within five seconds a second time will close the door. There are power sliding side door switches located on the B-pillar trim panel, just in front of the power sliding door for the rear seat passengers and in the overhead console...
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 • If the power sliding side door is not in the full open or To avoid unintentional operation of the power sliding doors from the rear seats, push the power sliding door close position, it will fully open when a power sliding master lock button, located in the overhead console, to door switch is pushed.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Sliding Side Door Open Flash You can turn the feature back on by repeating the previous procedure. The left and right exterior hazard lights will flash for 12 seconds when either sliding door is opened. This will Power Sliding Side Door Power Switch alert other drivers in the area that passenger(s) could be To provide a safer environment for small children riding...
Page 57: Sliding Side Door Child Protection Lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 Sliding Side Door Child Protection Lock To provide a safer environment for small children riding in the rear seats, the sliding doors are equipped with a Child Protection Door Lock system. NOTE: When the Child Protection Door Lock system is engaged, the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • When the Child Protection Door Lock system is en- gaged, (even if the inside door lock is in the unlocked position) the door can be opened only by using the outside door handle, the RKE transmitter, the switches on the overhead console or the switches located on the trim panel just in front of the power sliding door.
Page 59 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 NOTE: WARNING! • After setting the Child Protection Door Lock system, Avoid trapping anyone in the vehicle in a collision. always test the door from the inside to make certain it Remember that the sliding doors can only be opened is in the desired position.
Page 60: Liftgate
58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LIFTGATE On vehicles equipped with power locks, the liftgate can be unlocked using the Remote Keyless Entry (RKE) transmitter button, or by activating the power door lock switches located on the front doors. To open the liftgate, push the liftgate release handle located on the underside of the license plate bar and pull the liftgate open with one fluid motion.
Page 61: Power Liftgate - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Power Liftgate — If Equipped The power liftgate may be opened manually or by using the button on the Remote Keyless Entry (RKE) transmit- ter. Push the button on the transmitter twice within five seconds, to open the power liftgate.
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The power liftgate may be closed by pushing the button, and several audible beeps will occur to signal that the located in the upper left trim in the liftgate opening. liftgate is opening or closing. Pushing once will only close the liftgate.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 • During power operation, whether liftgate is fully open (62°C). Be sure to remove any buildup of snow or ice or fully closed, the liftgate chime will beep several from the liftgate before pushing any of the power times indicating power operation is in progress.
Page 64: Occupant Restraint Systems
62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE OCCUPANT RESTRAINT SYSTEMS WARNING! Some of the most important safety features in your • Driving with the liftgate open can allow poisonous vehicle are the restraint systems: exhaust gases into your vehicle. You and your •...
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 Here are some simple steps you can take to minimize the 5. You should read the instructions provided with your risk of harm from a deploying air bag: child restraint to make sure that you are using it properly.
Page 66: Seat Belt Systems
64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ejection and the risk of injury caused by striking the WARNING! inside of the vehicle. Everyone in a motor vehicle should • Never place a rear-facing child restraint in front of be belted at all times. an air bag.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 position the Seat Belt Reminder Light will turn on and Change Of Status remain on until both outboard front seat belts are buckled. If the driver or outboard front seat passenger (if The outboard front passenger seat BeltAlert is not active equipped with outboard front passenger seat BeltAlert) when an outboard front passenger seat is unoccupied.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: If BeltAlert has been deactivated and the driver WARNING! or outboard front seat passenger (if equipped with out- • Relying on the air bags alone could lead to more board front passenger seat BeltAlert) is unbuckled the Seat Belt Reminder Light will turn on and remain on until severe injuries in a collision.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 WARNING! (Continued) WARNING! (Continued) • Do not allow people to ride in any area of your • A lap belt worn too high can increase the risk of vehicle that is not equipped with seats and seat injury in a collision.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • A seat belt that is too loose will not protect you • A frayed or torn seat belt could rip apart in a properly. In a sudden stop, you could move too far collision and leave you with no protection.
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 Pulling Out The Latch Plate Inserting Latch Plate Into Buckle 3. When the seat belt is long enough to fit, insert the latch 4. Position the lap belt so that it is snug and lies low plate into the buckle until you hear a “click.”...
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE stowed position. If necessary, slide the latch plate down the webbing to allow the seat belt to retract fully. Lap/Shoulder Belt Untwisting Procedure Use the following procedure to untwist a twisted lap/ shoulder belt.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 4. Continue to slide the latch plate up until it clears the folded webbing and the seat belt is no longer twisted. Adjustable Upper Shoulder Belt Anchorage In the front and second row outboard seats the shoulder belt can be adjusted upward or downward to position the seat belt away from your neck.
Page 74 72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: The adjustable upper shoulder belt anchorage is equipped with an Easy Up feature. This feature allows the shoulder belt anchorage to be adjusted in the upward position without pushing or squeezing the release but- ton.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 Mini-Latch Stowage Mini-Latch And Buckle Connected 3. Route the shoulder belt to the inside of the left head 4. When the seat belt is long enough to fit, insert the restraint. mini-latch plate into the mini-buckle until you hear a “click.”...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Connect Mini-Latch To Buckle Rear Center Seat Belt Buckled 5. Sit back in seat. Slide the regular latch plate up the 6. When the seat belt is long enough to fit, insert the latch webbing as far as necessary to allow the seat belt to go plate into the buckle until you hear a “click.”...
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 8. Position the shoulder belt on your chest so that it is comfortable and not resting on your neck. The retrac- tor will withdraw any slack in the seat belt. 9. To release the seat belt, push the red button on the buckle.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Seat Belt Extender. The Seat Belt Extender should be used WARNING! only if the existing seat belt is not long enough. When the • If the mini-latch plate and mini-buckle are not Seat Belt Extender is not required for a different occu- pant, it must be removed.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 Seat Belts And Pregnant Women Position the lap belt snug and low below the abdomen and across the strong bones of the hips. Place the shoulder belt across the chest and away from the neck. Never place the shoulder belt behind the back or under the arm.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The pretensioners are triggered by the Occupant Re- Restraints” section of this manual. The table below straint Controller (ORC). Like the air bags, the preten- defines the type of feature for each seating position. sioners are single use items.
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 sound as the seat belt retracts. Allow the webbing to retract completely in this case and then carefully pull out only the amount of webbing necessary to comfortably wrap around the occupant’s mid-section. Slide the latch plate into the buckle until you hear a click.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Mode and activate the vehicle sensitive (emergency) WARNING! (Continued) locking mode. 12 years or younger, including a child in a rear- facing child restraint. WARNING! • Only use a rear-facing child restraint in a vehicle •...
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Supplemental Active Head Restraints (AHR) When AHRs deploy during a rear impact, the front half of the head restraint extends forward to minimize the gap These head restraints are passive, deployable compo- between the back of the occupant’s head and the AHR.
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • All occupants, including the driver, should not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 US LLC dealer must reset the AHRs on the driver’s and WARNING! (Continued) front passenger’s seat before driving. Personally attempt- as loose cargo could contact the Active Head Re- ing to reset the AHRs may result in damage to the AHRs straint during sudden stops.
Page 86: Supplemental Restraint System (Srs)
84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Supplemental Side Air Bags WARNING! • Supplemental Knee Air Bags Deployed AHRs are not able to best protect you in all • Front and Side Impact Sensors types of collisions. Have deployed AHRs reset by an authorized dealer immediately.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Air Bag Features WARNING! The Advanced Front Air Bag system has multistage • No objects should be placed over or near the air driver and front passenger air bags. This system provides bag on the instrument panel or steering wheel output appropriate to the severity and type of collision as because any such objects could cause harm if the...
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 Because air bag sensors measure vehicle deceleration WARNING! (Continued) over time, vehicle speed and damage by themselves are some collisions, air bags won’t deploy at all. Al- not good indicators of whether or not an air bag should ways wear your seat belts even though you have air have deployed.
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Knee Impact Bolsters Supplemental Driver Knee Air Bag The Knee Impact Bolsters help protect the knees of the This vehicle is equipped with a Supplemental Driver driver and front passenger, and position the front occu- Knee Air Bag mounted in the instrument panel below the pants for improved interaction with the Advanced Front steering column.
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 deploys through the seat seam into the space between the occupant and the door. The SAB moves at a very high speed and with such a high force that it could injure occupants if they are not seated properly, or if items are positioned in the area where the SAB inflates.
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE injury reduction potential provided by the seat belts and body structure. The SABICs deploy downward, covering the side win- dows. An inflating SABIC pushes the outside edge of the trim out of the way and covers the window. The SABICs inflate with enough force to injure occupants if they are not belted and seated properly, or if items are positioned in the area where the SABICs inflate.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 The SABICs and SABs (“Side Air Bags”) are designed to WARNING! activate in certain side impacts and certain rollover • Your vehicle is equipped with left and right events. The Occupant Restraint Controller (“ORC”) de- termines whether the deployment of the Side Air Bags in Supplemental Side Air Bag Inflatable Curtains a particular side impact or rollover event is appropriate,...
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE help keep you in position, away from inflating Side Air WARNING! (Continued) Bags. To get the best protection from the Side Air Bags, properly. In some collisions, Side Air Bags won’t occupants must wear their seat belts properly and sit deploy at all.
Page 95 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 The Side Air Bags will not deploy in all side collisions, faster-developing event may deploy the seat belt preten- including some collisions at certain angles, or some side sioners as well as the Side Air Bags on both sides of the collisions that do not impact the area of the passenger vehicle.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE deploy and unfold. The abrasions are similar to fric- Do not drive your vehicle after the air bags have de- tion rope burns or those you might get sliding along a ployed. If you are involved in another collision, the air carpet or gymnasium floor.
Page 97 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 Enhanced Accident Response System Enhanced Accident Response System Reset Procedure In the event of an impact, if the communication network remains intact, and the power remains intact, depending In order to reset the Enhanced Accident Response System on the nature of the event, the ORC will determine functions after an event, the ignition switch must be whether to have the Enhanced Accident Response Sys-...
Page 98 96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE the OFF position or in the ACC position, the air bag While the air bag system is designed to be maintenance system is not on and the air bags will not inflate. free, if any of the following occurs, have an authorized dealer service the air bag system immediately.
Page 99 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 WARNING! WARNING! (Continued) wiring, including adding any kind of badges or Ignoring the Air Bag Warning Light in your instru- stickers to the steering wheel hub trim cover or the ment panel could mean you won’t have the air bags upper right side of the instrument panel.
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Whether or not the driver and passenger safety belts WARNING! (Continued) were buckled/fastened; authorized dealer. Only manufacturer approved • How far (if at all) the driver was depressing the seat accessories may be used. If it is necessary to accelerator and/or brake pedal;...
Page 101: Child Restraints
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 In addition to the vehicle manufacturer, other parties, WARNING! such as law enforcement, that have the special equip- ment, can read the information if they have access to the In a collision, an unrestrained child can become a vehicle or the EDR.
Page 102 100 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Before buying any restraint system, make sure that it has NOTE: a label certifying that it meets all applicable Safety • For additional information, refer to www.seatcheck.org Standards. You should also make sure that you can install or call 1-866-732-8243.
Page 103 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 101 Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Larger Children Children who have out-grown their Belt Positioning Booster Seat and the ve- forward-facing child restraint, but are too hicle seat belt, seated in the rear seat of small to properly fit the vehicle’s seat the vehicle belt...
Page 104 102 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! WARNING! (Continued) function as it was designed by the car seat manufac- • Never place a rear-facing child restraint in front of turer, and your child may be more severely injured as an air bag.
Page 105 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 103 Older Children And Child Restraints seat. The child and belt-positioning booster seat are held in the vehicle by the seat belt. Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forward- WARNING! facing in the vehicle.
Page 106 104 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE simple 5-step test to decide whether the child can use the WARNING! (Continued) vehicle’s seat belt alone: • When your child restraint is not in use, secure it in 1. Can the child sit all the way back against the back of the vehicle with the seat belt or LATCH anchor- the vehicle seat? ages, or remove it from the vehicle.
Page 107 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 105 If the answer to any of these questions was “no,” then the WARNING! child still needs to use a booster seat in this vehicle. If the child is using the lap/shoulder belt, check seat belt fit Never allow a child to put the shoulder belt under an periodically and make sure the seat belt buckle is latched.
Page 108 106 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 109 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 107 Lower Anchors And Tethers For CHildren has three vehicle anchor points for installing LATCH- (LATCH) Restraint System equipped child seats. There are two lower anchorages located at the back of the seat cushion where it meets the seatback and one top tether anchorage located behind the seating position.
Page 110 108 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle Second Row Bench • Lower Anchorage Symbol 2 anchorages per seating position Second Row Captains Chairs • Top Tether Anchorage Symbol...
Page 111 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 109 Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight + 65 lbs (29.5 kg) Use the LATCH anchorage system until weight of the child restraint) for using the the combined weight of the child and the LATCH anchorage system to attach the child restraint is 65 lbs (29.5 kg).
Page 112 110 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH Can the rear-facing child restraint touch The child seat may touch the back of the the back of the front passenger seat? front passenger seat if the child restraint manufacturer also allows contact.
Page 113 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 111 Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback. They are just visible when you lean into the rear seat to install the child restraint. You will easily feel them if you run your finger along the gap between the seatback and seat cushion.
Page 114 112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE third row center seating position. The tether anchorages are located on the back of the seat, near the floor. LATCH Anchorages (Third Row 60/40 Anchorages Shown) Locating Tether Anchorages Tether Strap Anchorages (Third Row 60/40 Anchorage Shown) LATCH-compatible child restraint systems will be There are tether strap anchorages located be-...
Page 115 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 113 anchorage and a way to tighten the connection to the WARNING! anchorage. Forward-facing child restraints and some rear-facing child restraints will also be equipped with a Never use the same lower anchorage to attach more tether strap.
Page 116 114 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Loosen the adjusters on the lower straps and on the 4. If the child restraint has a tether strap, connect it to the tether strap of the child seat so that you can more top tether anchorage.
Page 117 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 115 How To Stow An Unused ALR Seat Belt: WARNING! When using the LATCH attaching system to install a • Improper installation of a child restraint to the child restraint, stow all ALR seat belts that are not being LATCH anchorages can lead to failure of the re- used by other occupants or being used to secure child straint.
Page 118 116 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing Child Restraints Using The Vehicle Seat retract back into the retractor. If it is locked, the ALR will Belt make a clicking noise while the webbing is pulled back into the retractor. Refer to the “Automatic Locking The seat belts in the passenger seating positions are Mode”...
Page 119 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 117 Lap/Shoulder Belt Systems For Installing Child Restraints In This Vehicle Second Row Bench • Cinch = Cinching Latch Plate • ALR = Switchable Automatic Locking Retractor Second Row Captains Chair...
Page 120 118 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems Frequently Asked Question About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Child Restraint Always use the tether anchor when weight + weight of the child re- using the seat belt to install a for- straint) for using the Tether Anchor ward facing child restraint, up to...
Page 121 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 119 Frequently Asked Question About Installing Child Restraints With Seat Belts Can the buckle stalk be twisted to In positions with cinching latch tighten the seat belt against the belt plates (CINCH), the buckle stalk path of the child restraint? may be twisted up to 3 full turns.
Page 122 120 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE back into the retractor. As the webbing retracts, you 9. Test that the child restraint is installed tightly by will hear a clicking sound. This means the seat belt is pulling back and forth on the child seat at the belt now in the Automatic Locking mode.
Page 123 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 121 2. Next, pull enough of the seat belt webbing from the 6. Test that the child restraint is installed tightly by retractor to pass it through the belt path of the child pulling back and forth on the child seat at the belt restraint.
Page 124 122 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE into the buckle again. If you still cannot make the child WARNING! (Continued) restraint installation tight, try a different seating position. section “Lower Anchors and Tethers for CHildren Installing Child Restraints Using The Top Tether (LATCH) Restraint System”...
Page 125 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 123 2. Route the tether strap to provide the most direct path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head restraint, and where possible, route the tether strap under the head restraint and between the two posts.
Page 126: Transporting Pets
124 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) child. Use only the anchorage position directly behind the child seat to secure a child restraint top tether strap. • If your vehicle is equipped with a split rear seat, make sure the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap.
Page 127: Engine Break-In Recommendations
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 125 ENGINE BREAK-IN RECOMMENDATIONS CAUTION! A long break-in period is not required for the engine and Never use Non-Detergent Oil or Straight Mineral Oil drivetrain (transmission and axle) in your vehicle. in the engine or damage may result. Drive moderately during the first 300 miles (500 km).
Page 128: Exhaust Gas
126 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! • Do not leave children or animals inside parked WARNING! vehicles in hot weather. Interior heat build-up may Exhaust gases can injure or kill. They contain carbon cause serious injury or death. monoxide (CO), which is colorless and odorless.
Page 129: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 127 Safety Checks You Should Make Inside The WARNING! (Continued) Vehicle • If it is necessary to sit in a parked vehicle with the Seat Belts engine running, adjust your heating or cooling controls to force outside air into the vehicle.
Page 130 128 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE have the system inspected at an authorized dealer as cannot slip out of position and interfere with the pedals soon as possible. This light will illuminate with a or impair safe operation of your vehicle in other ways. single chime when a fault with the Air Bag Warning Light has been detected, it will stay on until the fault WARNING!
Page 131: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 129 Periodic Safety Checks You Should Make Outside WARNING! (Continued) The Vehicle • Never put floor mats or other floor coverings on top Tires of already installed floor mats. Additional floor mats and other coverings will reduce the size of the Examine tires for excessive tread wear and uneven wear pedal area and interfere with the pedals.
Page 132 130 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Door Latches Check for proper closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid (if equipped), or brake fluid leaks are suspected.
Page 133: Understanding The Features Of Your Vehicle
UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS ▫ Tilt Mirrors In Reverse (Available With Memory MIRRORS ......138 Seat Only) —...
Page 134 132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Operation ......156 ▫ Power Lumbar — If Equipped ... .195 ▫...
Page 135 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 ▫ Daytime Running Lights — If Equipped ..231 DRIVER MEMORY SEAT — IF EQUIPPED ..223 ▫ Programming The Memory Feature ..224 ▫...
Page 136 134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Windshield Washers....239 ▫ To Vary The Speed Setting ....248 ▫...
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 ▫ Security ......273 OVERHEAD CONSOLES ....261 ▫...
Page 138 136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Ignition Off Operation ....278 ▫ Driver Seatback Storage — If Equipped ..290 ▫...
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 ▫ Rear Window Defroster ....303 ▫ Deploying The Crossbars ....305 LOAD LEVELING SYSTEM —...
Page 140: Mirrors
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Inside Day/Night Mirror — If Equipped A two-point pivot system allows for horizontal and vertical adjustment of the mirror. Adjust the mirror to center on the view through the rear window. Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
Page 141: Automatic Dimming Mirror - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 Automatic Dimming Mirror — If Equipped This mirror automatically adjusts for headlight glare from vehicles behind you. You can turn the feature on or off by pushing the button at the base of the mirror. The On/Off symbol on the button will illuminate when the auto-dimming feature is enabled.
Page 142: Outside Mirrors
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Outside Mirrors Driver’s Outside Automatic Dimming Mirror — If Equipped To receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic with a slight The driver’s outside mirror will automatically adjust for overlap of the view obtained on the inside mirror.
Page 143: Power Mirrors - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Power Mirrors — If Equipped The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a The power mirror controls are located on the driver-side mirror, push either the L (left) or R (right) to select the door trim panel.
Page 144: Heated Mirrors - If Equipped
142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Mirrors — If Equipped NOTE: The Tilt Mirrors in Reverse feature is not enabled when delivered from the factory. The Tilt Mirrors in Reverse feature can be enabled or disabled in the Elec- These mirrors are heated to melt frost or ice.
Page 145 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 Resetting The Power Folding Outside Mirrors You may need to reset the power folding mirrors if the following occurs: • The mirrors are accidentally blocked while folding. • The mirrors are accidentally manually folded/ unfolded.
Page 146: Illuminated Vanity Mirrors - If Equipped
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Illuminated Vanity Mirrors — If Equipped BLIND SPOT MONITORING (BSM) — IF EQUIPPED An illuminated vanity mirror is located on the sun visor. To use the mirror, rotate the sun visor down and swing The Blind Spot Monitoring (BSM) system uses two radar- the mirror cover upward.
Page 147 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 Rear Detection Zones BSM Warning Light When the vehicle is started, the BSM warning light will The BSM detection zone covers approximately one lane momentarily illuminate in both outside rear view mirrors width on both sides of the vehicle 12 ft (3.8 m). The zone to let the driver know that the system is operational.
Page 148 146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE both sides of the vehicle when the vehicle speed reaches The area on the rear fascia where the radar sensors are approximately 6 mph (10 km/h) or higher and will alert located must remain free of snow, ice, and dirt/road the driver of vehicles in these areas.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 150 148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Overtaking Traffic If you pass another vehicle slowly (with a relative speed of less than 15 mph (24 km/h) and the vehicle remains in the blind spot for approximately 1.5 seconds, the warning light will be illuminated.
Page 151 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 The BSM system is designed not to issue an alert on The BSM system will not alert you of objects that are stationary objects such as guardrails, posts, walls, foliage, traveling in the opposite direction of the vehicle in berms, etc.
Page 152: Rear Cross Path (Rcp)
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 153 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 NOTE: In a parking lot situation, oncoming vehicles can be obscured by vehicles parked on either side. If the sensors are blocked by other structures or vehicles, the system will not be able to alert the driver. When RCP is on and the vehicle is in REVERSE, the driver is alerted using both the visual and audible alarms, including reducing the radio volume.
Page 154: Modes Of Operation
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Modes Of Operation Blind Spot Alert Lights/Chime Modes Of Operation With EVIC When operating in Blind Spot Alert Lights/Chime mode, the BSM system will provide a visual alert in the appro- Three selectable modes of operation are available in the priate side view mirror based on a detected object.
Page 155: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 When the system is in RCP, the system shall respond with General Information both visual and audible alerts when a detected object is This vehicle has systems that operate on radio frequency present. Whenever an audible alert is requested, the radio that comply with Part 15 of the Federal Communications volume is reduced.
Page 156: Uconnect Phone - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE UCONNECT PHONE — IF EQUIPPED Uconnect Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your Uconnect Phone is a voice-activated, hands-free, in- vehicle and enables you to mute the system’s microphone vehicle communications system.
Page 157 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Voice Command Button WARNING! Actual button location may vary with the ra- Any voice commanded system should be used only dio. The individual buttons are described in the in safe driving conditions following all applicable “Operation”...
Page 158: Understanding The Features Of Your Vehicle Operation
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Operation part of the command when you are asked for it. For example, you can use the compound form voice com- Voice commands can be used to operate the Uconnect mand “Phonebook New Entry,” or you can break the Phone and to navigate through the Uconnect Phone compound form command into two voice commands: menu structure.
Page 159 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 To activate the Uconnect Phone, simply push the Phone The following are general phone to Uconnect Phone button and follow the audible prompts for direc- pairing instructions: tions. Uconnect Phone sessions begin with a push of 1.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • You will then be asked to give your mobile phone a Dial By Saying A Number priority level between one and seven, with one being To dial a number using Voice Command: the highest priority.
Page 161 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 • To call a name from the Uconnect Phonebook or 2. After the “Ready” prompt and the following beep, say “Call.” downloaded Phonebook, follow the procedure in “Call by Saying a Name” section. •...
Page 162 160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Either the mobile phone’s phonebook or the mobile 3. When prompted, say the name of the new entry. phone’s SIM card phonebook is downloaded. • Use of long names helps the Voice Command and is •...
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 language has a separate 32-name phonebook accessible 2. After the “Ready” prompt and the following beep, say only in that language. In addition, if equipped and “Phonebook Edit Entry.” supported by your phone, Uconnect Phone automatically •...
Page 164 162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mobile and a home number, but you can add “John 2. After the “Ready” prompt and the following beep, say Doe’s” work number later using the “Phonebook Edit “Phonebook Delete.” Entry” feature. 3. After you enter the Phonebook Delete menu, you will Delete Uconnect Phonebook Entry then be asked for the name of the entry that you wish to delete.
Page 165 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 Delete/Erase “All” Uconnect Phonebook Entries List All Names In The Uconnect Phonebook To list ALL names in the Uconnect Phonebook using NOTE: voice Command: • ONLY the phonebook in the current language is de- 1.
Page 166: Phone Call Features
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. The selected number will be dialed. Answer Or Reject An Incoming Call — Call Currently In Progress Phone Call Features If a call is currently in progress and you have another The following features can be accessed through the incoming call, you will hear the same network tones for Uconnect Phone if the feature(s) are available on your call waiting that you normally hear when using your...
Page 167 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 first call, refer to “Toggling Between Calls” in this Conference Call section. To combine two calls, refer to “Conference When two calls are in progress (one active and one on Call” in this section. hold): Place/Retrieve A Call From Hold 1.
Page 168 166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Call Termination NOTE: This may not be the last number dialed from the Uconnect Phone. To end a call in progress: Call Continuation 1. Momentarily push the Phone button. • Only the active call(s) will be terminated and if there Call continuation is the progression of a phone call on the Uconnect Phone after the vehicle ignition key has been is a call on hold, it will become the new active call.
Page 169: Uconnect Phone Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 • An active call is automatically transferred to the mo- NOTE: After every Uconnect Phone language change bile phone after the ignition key is cycled to OFF. operation, only the language-specific 32-name phone- book is usable.
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE paired mobile phone to call the emergency number. WARNING! This feature is supported in the U.S., Canada, and Mexico. To use your Uconnect Phone System in an emergency, your mobile phone must be: NOTE: •...
Page 171 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 NOTE: You should program the desired Towing Assis- Working With Automated Systems tance phone number using the Voice Command system. This method is used in instances where one generally has To do this, push the Phone button and say “Setup,”...
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE used for navigating through an automated customer Barge In — Overriding Prompts service center menu structure, and to leave a number The “Voice Command” button can be used when you on a pager. wish to skip part of a prompt and issue your voice command immediately.
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 Phone And Network Status Indicators NOTE: Certain brands of mobile phones do not send the dial ring to the Uconnect Phone to play it on the vehicle If available on the radio and/or on a premium display audio system, so you will not hear it.
Page 174: Advanced Phone Connectivity
172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Advanced Phone Connectivity List Paired Mobile Phone Names To list the paired mobile phone names using Voice Transfer Call To And From Mobile Phone Command: The Uconnect Phone allows ongoing calls to be trans- ferred from your mobile phone to the Uconnect Phone 1.
Page 175: Things You Should Know About Your Uconnect Phone
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 Select Another Mobile Phone Delete Uconnect Phone Paired Mobile Phones This feature allows you to select and start using another To delete Uconnect phone paired mobile phones using mobile phone paired with the Uconnect Phone. Voice Command: To select another mobile phone using Voice Command: 1.
Page 176 174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Voice Training Voice Training session should be completed when the vehicle is parked with the engine running, all windows For users experiencing difficulty with the system recog- closed, and the blower fan switched off. nizing their voice commands or numbers, the Uconnect Phone Voice Training feature may be used.
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 • Smooth road surface Voice Command • Fully closed windows For best performance: • Adjust the rearview mirror to provide at least ½ inch • Dry weather condition (1 cm) gap between the overhead console (if equipped) NOTE: and the mirror.
Page 178 176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Phonebook (Downloaded and Uconnect Phone Local) • Low road noise name recognition rate is optimized when the entries • Smooth road surface are not similar. • Fully closed windows • Numbers must be spoken in single digits. “800” must •...
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 Recent Calls made to notify you that you have a new text message. If you wish to hear the new message: If your phone supports “Automatic Phonebook Down- load,” Uconnect Phone can list your Outgoing, Incoming 1.
Page 180 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Send Messages: List of Preset Messages: 1. Yes 13. I’ll be late You can send messages using Uconnect Phone. To send a new message: 2. No 14. Are you there yet? 1. Push the Phone button.
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Turn SMS Incoming Announcement ON/OFF Bluetooth Communication Link Mobile phones have been found to lose connection to the Turning the SMS Incoming Announcement OFF will stop Uconnect Phone. When this happens, the connection can the system from announcing the new incoming mes- generally be re-established by switching the phone off/ sages.
Page 182 180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 183 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181...
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE...
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 Voice Commands Primary Alternate (s) Primary Alternate (s) zero call cancel confirmation prompts three continue four delete five dial download seven edit eight emergency nine English star (*) erase all plus (+) Espanol pound (#) Francais add location...
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Primary Alternate (s) Primary Alternate (s) home redial language return to main menu return or main menu list names select phone select list phones send mobile set up phone settings or phone set up mute towing assistance mute off...
Page 187: General Information
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 General Information VOICE COMMAND — IF EQUIPPED This device complies with Part 15 of the FCC rules and Voice Command System Operation RSS 210 of Industry Canada. Operation is subject to the following conditions: The Uconnect Voice Command system allows •...
Page 188 186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pushing the Voice Command button while the sys- WARNING! tem is speaking is known as “barging in.” The system will be interrupted, and after the beep, you can add or Any voice commanded system should be used only change commands.
Page 189: Commands
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 To hear the first available Menu, push the Voice Com- Main Menu mand button and say “Help” or “Main Menu.” Start a dialogue by pushing the Voice Command but- ton. You may say “Main Menu” to switch to the main Commands menu.
Page 190 188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • “Menu Radio” (to switch to the radio menu) Radio AM • “Main Menu” (to switch to the main menu) To switch to the AM band, say “AM” or “Radio AM.” In this mode, you may say the following commands: Satellite Radio •...
Page 191 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 • “Previous Track” (to play the previous track) Disc Mode • “Play” (to play an Artist Name, Playlist Name, Album To switch to the disc mode, say “Disc.” In this mode, you may say the following commands: Name, Track Name, etc.) •...
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Memo Mode – “Previous” (to play the previous memo) To switch to the voice recorder mode, say “Memo.” In – “Delete” (to delete a memo) this mode, you may say the following commands: –...
Page 193: Voice Training
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 • “Tutorial” parked, engine running, all windows closed, and the blower fan switched off. This procedure may be re- • “Voice Training” peated with a new user. The system will adapt to the NOTE: Keep in mind that you have to push the Voice last trained voice only.
Page 194: Power Seats - If Equipped
192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. In a collision, people riding in these areas are more likely to be seriously injured or killed.
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 WARNING! CAUTION! • Adjusting a seat while driving may be dangerous. Do not place any article under a power seat or Moving a seat while driving could result in loss of impede its ability to move as it may cause damage to control which could cause a collision and serious the seat controls.
Page 196 194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Tilting The Seat Up Or Down WARNING! The angle of the seat cushion can be adjusted in four • Adjusting a seat while driving may be dangerous. directions. Pull upward or push downward on the front Moving a seat while driving could result in loss of or rear of the seat switch, the front or rear of the seat control which could cause a collision and serious...
Page 197: Power Lumbar - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats may also be equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support.
Page 198: Heated Seats - If Equipped
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Heated Seats — If Equipped WARNING! (Continued) On some models, the front and rear seats may be serious burns due to the increased surface tempera- equipped with heaters located in the seat cushions and ture of the seat.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 You can choose from HI, LO or OFF heat settings. Amber Rear Heated Seats indicator lights in each switch indicate the level of heat in On some models, the second row seats are equipped with use.
Page 200: Manual Front/Second Row Seat Adjuster
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE You can choose from HI, LO or OFF heat settings. Amber Manual Front/Second Row Seat Adjuster indicator lights in each switch indicate the level of heat in Both front seats are adjustable forward or rearward. The use.
Page 201: Manual Reclining Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 have reached the desired position. Then, using body pressure, move forward and rearward on the seat to be sure that the seat adjusters have latched. WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death.
Page 202: Head Restraints
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! WARNING! (Continued) never be adjusted while the vehicle is in motion. Do not ride with the seatback reclined so that the Driving a vehicle with the head restraints improperly shoulder belt is no longer resting against your chest. adjusted or removed could cause serious injury or In a collision you could slide under the seat belt, death in the event of a collision.
Page 203 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 This system is design to reduce the risk of injury to the driver or front passenger in certain types of rear impacts. Refer to “Occupant Restraints” in “Things To Know Before Starting Your Vehicle” for further information. To raise the head restraint, pull upward on the head restraint.
Page 204 202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Active Head Restraint (Normal Position) Active Head Restraint (Tilted) NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only. If either of the head restraints require removal, see your autho- rized dealer.
Page 205 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 • In the event of deployment of an Active Head Re- WARNING! (Continued) straint, refer to “Occupant Restraints/Resetting Active • Active Head Restraints may be deployed if they are Head Restraints (AHR)” in “Things To Know Before struck by an object such as a hand, foot or loose Starting Your Vehicle”...
Page 206: Stow 'N Go Seating - If Equipped
204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints — Third Row The head restraint in the center position can be raised and lowered for tether routing. Refer to “Occupant Re- straints” in “Things To Know Before Starting Your Ve- hicle”...
Page 207 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 NOTE: Seat will not stow in the storage bin unless the 5. Pull upward on the seatback recliner lever located on armrests are raised. the outboard side of the seat. 4. Slide the storage bin locking mechanism to the “LOCK”...
Page 208 206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The non-adjustable head restraint and seatback will fold automatically during the seat tumble. No additional actuation is necessary. Automatic Folding Seatback The seat will automatically tumble into position for easy storage. Non-Adjustable Head Restraint...
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 6. Push the seat into the storage bin. Tumbled Second Row Seat NOTE: You may experience deformation in the seat Seat In Storage Bin cushion from the seat belt buckles if the seats are left 7.
Page 210 208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unstow Second Row Seats CAUTION! 1. Pull up on the storage bin latch to open the cover. The storage bin cover must be locked and flat to 2. Pull up on the strap to lift the seat out of the storage avoid damage from contact with the front seat tracks, bin and push the seat rearward to latch the seat which have minimal clearance to the cover.
Page 211 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 WARNING! (Continued) • Sitting in a seat with the head restraint in its lowered position could result in serious injury or death in a collision. Always make sure the head restraints are in their upright positions when the seat is to be occupied.
Page 212 210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Easy Entry Second Row The second row Stow ’n Go seats allow easy entry to the third row seat or rear cargo area. Pull up on the seatback recliner lever on the outboard side of the seat.
Page 213: Quad Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 The seat will automatically fold into position for easy entry into the third row. WARNING! In the event of a collision you could be injured if the seat is not fully latched. Quad Seats — If Equipped Both Quad seats are adjustable forward or rearward.
Page 214 212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Page 215 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 Fold-Flat Easy Entry To fold the seat, lift the recliner lever to the full upward The Quad seats can be tilted forward for easy entry into position and push the seatback forward until it rests on the third row.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE For passengers seated in the third row, there is a pull Removal strap located on the outboard side of the seat near the The Quad seats can be removed if additional storage is bottom of the seat back.
Page 217: Second Row Bench Seat - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Second Row Bench Seat — If Equipped indicator button pops up when the seat is unlocked. The seat assembly can now be removed from the vehicle and While the bench seat does not stow in the floor, it is moved on its Easy Out Rollers.
Page 218: Third Row Power Recline - If Equipped
216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! If not properly latched, the bench seats could become loose. Personal injuries could result. After reinstall- ing these seats, be sure the red indicator button on the release handles return into the handles. Third Row Power Recline —...
Page 219 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 NOTE: Lower the head restraint by pulling on the release strap marked “1” located on the outboard side of the head restraint. One Touch Folding Seat Third Row The rear switch bank allows multiple power folding and unfolding positions for the third row seats.
Page 220 218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Left and right third row seats can be folded individually NOTE: or together. The third row power folding seat adjusts to • Disconnect the center shoulder belt from the small the following positions using the switch bank located on buckle and lower the head restraints before attempting the left rear trim panel: to fold/stow the power third row seats.
Page 221: Manually Folding Third Row Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 • You may experience deformation in the seat cushion from the seat belt buckles if the seats are left folded for an extended period of time. This is normal and by simply opening the seats to the open position, over time the seat cushion will return to its normal shape.
Page 222 220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Pull release strap marked “2” located on the rear of the 4. Pull release strap marked “3” to release the anchors. seat to lower the seatback. Release Strap “3” Release Strap “2”...
Page 223 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 5. Pull release strap marked “4” and tumble the seat rearward into the storage bin. Stowed Third Row Seat NOTE: You may experience deformation in the seat cushion from the seat belt buckles if the seats are left Release Strap “4”...
Page 224 222 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Unfold Third Row Seats WARNING! (Continued) 1. Pull up on the assist strap to lift the seat out of the • Sitting in a seat with the head restraint in its storage bin and push the seat forward until the lowered position could result in serious injury or anchors latch.
Page 225: Plastic Grocery Bag Retainer Hooks
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 223 Plastic Grocery Bag Retainer Hooks Retainer hooks which will hold plastic grocery bag handles are built into the seatbacks of all rear seats and some front seats. The floor supports the partial weight of the bagged goods.
Page 226: Programming The Memory Feature
224 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming The Memory Feature NOTE: • Memory profiles can be set without the vehicle in To create a new memory profile, perform the following: PARK, but the vehicle must be in PARK to recall a 1.
Page 227: Memory Position Recall
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 225 NOTE: Before programming your RKE transmitters you 4. Push and release button (1) or (2) accordingly. must select the “RKE Linked To Memory” feature “Memory Profile Set” (1 or 2) will display in the through the Electronic Vehicle Information Center instrument cluster.
Page 228: Easy Entry/Exit Seat (Available With Memory Seat Only)
226 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To recall the memory setting for driver two, push MEMORY The distance the driver seat moves depends on where button 2 on the driver’s door or the UNLOCK button on the you have the driver seat positioned when you remove the RKE transmitter linked to Memory Position 2.
Page 229: To Open And Close The Hood
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 227 • The Easy Entry/Easy Exit feature is disabled when the TO OPEN AND CLOSE THE HOOD driver seat position is less than 0.9 inches (22.7 mm) To open the hood, two latches must be released. forward of the rear stop.
Page 230 228 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 2. Move to the front of the vehicle and look inside the Use the hood prop rod to secure the hood in the open center of the hood opening. Locate, then push the position.
Page 231: Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 229 LIGHTS Headlight Switch The headlight switch is located on the left side of the instrument panel. The switch controls the operation of the headlights, parking lights, instrument panel lights, interior lights and the fog lights. Headlight Switch With Halo Control Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation.
Page 232: Automatic Headlights - If Equipped
230 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Headlights — If Equipped on when windshield wipers are on may be found on vehicles equipped with an automatic headlight system. This system automatically turns your headlights on or off based on ambient light levels. To turn the system on, turn NOTE: The Headlights with Wipers feature can be the headlight switch to the extreme counterclockwise turned on or off through the Electronic Vehicle Informa-...
Page 233: Lights-On Reminder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 231 When exiting the vehicle the driver can choose to have Lights-On Reminder the headlights remain on for 30, 60 or 90 seconds or not If the headlights or the parking lights are left on, or if the remain on.
Page 234: Front Fog Lights - If Equipped
232 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Fog Lights — If Equipped To activate the front fog lights, turn on the parking lights or the low beam headlights and push in the headlight switch control knob. Pushing the headlight switch control knob in a second time will turn the front fog lights off.
Page 235 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233 Interior Lighting On NOTE: The ignition must be cycled to the OFF position for this feature to operate. Rotate the left dimmer control completely upward to the second detent (extreme top position) to turn on the Interior Lighting Off interior lights.
Page 236: Multifunction Lever
234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Multifunction Lever The multifunction lever is located on the left side of the steering column. Halo Control To activate the Halo lights, rotate the Halo switch control upward or downward to in- crease or decrease the lighting. Multifunction Lever The multifunction lever controls the: •...
Page 237: Turn Signals
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 235 • Headlight Beams Low/High Turn Signal Warning • Flash-To-Pass If the vehicle electronics sense that the vehicle has traveled at over 18 mph (29 km/h) for about 1 mile • Front and Rear Wipers — Washer Functions (1.6 km) with the turn signals on, a chime will sound to alert the driver.
Page 238: Flash-To-Pass
236 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Flash-To-Pass NOTE: Broken, muddy or obstructed headlights and taillights of vehicles in the field of view will cause You can signal another vehicle with your headlights by headlights to remain on longer (closer to the vehicle). lightly pulling the multifunction lever toward you.
Page 239 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 237 NOTE: To opt out of the Advanced Auto High-Beam To Deactivate Sensitivity Control (default) and enter Reduced High- Perform either of the following steps to deactivate the Beam Sensitivity Control (not recommended), toggle the Automatic High Beam system.
Page 240: Battery Protection
238 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Battery Protection This feature provides battery protection to avoid wearing down the battery if the headlights, parking lights, or front fog lights are left on for extended periods of time when the ignition switch is in the LOCK position. After eight minutes of the ignition switch being in the LOCK position and the headlight switch in any position other than OFF or AUTO, the lights will turn off automatically...
Page 241: Intermittent Wiper System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 239 cycles. The delay intervals will double in duration when WARNING! the vehicle speed is 10 mph (16 km/h) or less. Sudden loss of visibility through the windshield Windshield Wiper Operation could lead to a collision. You might not see other Rotate the end of the lever upward, to the first detent past vehicles or other obstacles.
Page 242: Mist Feature
240 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Mist Feature Rain Sensing Wipers — If Equipped Push the end of the multifunction lever inward (toward This feature senses moisture on the windshield and the steering column) to the first detent and release for a automatically activates the wipers for the driver.
Page 243 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 241 NOTE: The Rain Sensing system has protective features for the wiper blades and arms. It will not operate under the • The Rain Sensing feature will not operate when the following conditions: wiper speed is in the low or high position. •...
Page 244: Tilt/Telescoping Steering Column
242 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Remote Start Mode Inhibit — On vehicles equipped with Remote Starting system, Rain Sensing wipers are not operational when the vehicle is in the remote start mode. Once the operator is in the vehicle and has placed the ignition switch in the RUN position, rain sensing wiper operation can resume, if it has been selected, and no other inhibit conditions (mentioned...
Page 245: Heated Steering Wheel - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 243 steering column in position, push the lever upward until off. The heated steering wheel can shut off early or may fully engaged. not turn on when the steering wheel is already warm. The heated steering wheel control button is located on WARNING! the center of the instrument panel below the climate controls.
Page 246: Adjustable Pedals - If Equipped
244 UNDERSTANDING THE FEATURES OF YOUR VEHICLE during a remote start. Refer to “Electronic Vehicle Infor- ADJUSTABLE PEDALS — IF EQUIPPED mation Center (EVIC)” in “Understanding Your Instru- The adjustable pedals system is designed to allow a ment Panel” for further information. greater range of driver comfort for steering wheel tilt and seat position.
Page 247 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 245 • The pedals cannot be adjusted when the vehicle is in REVERSE or when the Electronic Speed Control Sys- tem is on. The following messages will be displayed on vehicles equipped with the Electronic Vehicle Informa- tion System (EVIC) if the pedals are attempted to be adjusted when the system is locked out (“Adjustable Pedal Disabled —...
Page 248: Electronic Speed Control - If Equipped
246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE positions. Refer to “Driver Memory Seat” in “Under- ELECTRONIC SPEED CONTROL — IF EQUIPPED standing The Features Of Your Vehicle” for further When engaged, the Electronic Speed Control takes over information. accelerator operations at speeds greater than 25 mph (40 km/h).
Page 249: To Activate
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 247 NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
Page 250: To Set A Desired Speed
248 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
Page 251 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 249 • If the button is continually pushed, the set speed will The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “Under- continue to increase until the button is released, then standing Your Instrument Panel”...
Page 252: To Accelerate For Passing
250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will NOTE: The Electronic Speed Control system maintains continue to decrease until the button is released, then speed up and down hills. A slight speed change on the new set speed will be established.
Page 253: Parksense Rear Park Assist - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 251 PARKSENSE REAR PARK ASSIST — IF ParkSense Sensors EQUIPPED The four ParkSense sensors, located in the rear fascia/ The ParkSense Rear Park Assist system provides visual bumper, monitor the area behind the vehicle that is and audible indications of the distance between the rear within the sensors’...
Page 254: Parksense Display
252 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ParkSense Warning Display is located in the Instru- ParkSense Display ment cluster’s EVIC display. It provides both visual and When the vehicle is in REVERSE, the warning display audible warnings to indicate the distance between the will turn ON indicating the system status.
Page 255 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 253 Park Assist System OFF Slow Tone The system will indicate a detected obstacle by showing three solid arcs and will produce a one-half second tone. As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous.
Page 256 254 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Fast Tone Continuous Tone The vehicle is close to the obstacle when the EVIC display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert operation when the system is detecting an obstacle:...
Page 257 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 255 WARNING ALERTS Rear Distance Greater than 79-39 inches 39-25 inches 25-12 inches Less than (inches/cm) 79 inches (200-100 cm) (100-65 cm) (65-30 cm) 12 inches (200 cm) (30 cm) Audible Alert None Single 1/2 Slow Fast Continuous...
Page 258: Enabling/Disabling Parksense
256 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling/Disabling ParkSense Service The ParkSense Rear Park Assist System ParkSense can be enabled and disabled through the During vehicle start up, when the ParkSense Rear Park Customer-Programmable Features section of the EVIC. Assist System has detected a faulted condition, the The available choices are: OFF, Sound Only, or Sound and instrument cluster will actuate a single chime, once per Display.
Page 259: Cleaning The Parksense System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 257 • When you move the gear selector to the REVERSE Cleaning The ParkSense System position and ParkSense is turned OFF, the EVIC will Clean the ParkSense sensors with water, car wash soap display “PARK ASSIST SYSTEM OFF” message for as and a soft cloth.
Page 260 258 UNDERSTANDING THE FEATURES OF YOUR VEHICLE object as a sensor problem, causing the “SERVICE WARNING! PARK ASSIST SYSTEM” message to be displayed in • Drivers must be careful when backing up even the EVIC. when using ParkSense. Always check carefully CAUTION! behind your vehicle, look behind you, and be sure to check for pedestrians, animals, other vehicles,...
Page 261: Parkview Rear Back Up Camera - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 259 When the vehicle is shifted out of REVERSE, the rear WARNING! (Continued) camera mode is exited and the last selected touchscreen could detect the ball mount and hitch ball assem- appears again. bly, depending on its size and shape, giving a false If your vehicle is equipped with the Camera Delay indication that an obstacle is behind the vehicle.
Page 262 260 UNDERSTANDING THE FEATURES OF YOUR VEHICLE that will help indicate the distance to the rear of the vehicle. The following table shows the approximate distances for each zone: Zone Distance to the rear of the vehicle 0 - 1 ft (0 - 30 cm) Yellow 1 ft - 3 ft (30 cm - 1 m) Green...
Page 263: Overhead Consoles
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 261 OVERHEAD CONSOLES CAUTION! (Continued) Front Overhead Console • To avoid vehicle damage, the vehicle must be driven slowly when using ParkView to be able to Two versions of the overhead console are available. The stop in time when an obstacle is seen.
Page 264: Courtesy/Interior Lighting
262 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: Premium sunroof console models include all of Courtesy/Interior Lighting above except sunglass storage. At the forward end of the console are two courtesy lights (standard dome light has two buttons). The lights turn on when a front door, a sliding door or the liftgate is opened.
Page 265: Sunglass Storage (Non-Sunroof Only)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 263 Sunglass Storage (Non-Sunroof Only) The door will slowly rotate to the full open position. At the front of the overhead console, a compartment is provided for the storage of two pairs of sunglasses. From the closed position, push the door latch to open the compartment.
Page 266: Rear Courtesy/Reading Lights - If Equipped
264 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Courtesy/Reading Lights — If Equipped The overhead console has two sets of courtesy lights. The lights turn on when a front door, a sliding door or the liftgate is opened. If your vehicle is equipped with Remote Keyless Entry (RKE) the lights will also turn on when the UNLOCK button on the RKE transmitter is pushed.
Page 267: Rear Overhead Consoles - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 265 Reading Lights Overhead Compartment Features Rear Overhead Consoles — If Equipped 1 — LCD Screen* 5 — Storage 2 — Rear HVAC 6 — LCD Screen* The rear overhead storage system is available in two 3 —...
Page 268: Garage Door Opener - If Equipped
266 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Console Halo Lighting The HomeLink buttons, located on either the overhead console, headliner or sunvisor, designate the three differ- The rear overhead console has recessed halo lighting ent HomeLink channels. The HomeLink indicator is around the perimeter of the console base.
Page 269: Before You Begin Programming Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 267 For more efficient programming and accurate transmis- sion of the radio-frequency signal it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink system.
Page 270: Programming A Rolling Code
268 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Programming A Rolling Code For programming garage door openers that were manu- factured after 1995. These garage door openers can be identified by the “LEARN” or “TRAIN” button located where the hanging antenna is attached to the garage door opener.
Page 271 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 269 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 Firmly push and release the “LEARN” or “TRAIN- cm) away from the HomeLink button you wish to ING” button. On some garage door openers/devices program while keeping the HomeLink indicator light there may be a light that blinks when the garage door in view.
Page 272: Programming A Non-Rolling Code
270 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink Button 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 (Rolling Code) cm) away from the HomeLink button you wish to program while keeping the HomeLink indicator light To reprogram a channel that has been previously trained, in view.
Page 273: Canadian/Gate Operator Programming
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 271 • To program the two remaining HomeLink buttons, Canadian/Gate Operator Programming repeat each step for each remaining button. DO NOT For programming transmitters in Canada/United States erase the channels. that require the transmitter signals to “time-out” after several seconds of transmission.
Page 274 272 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 3. Continue to push and hold the HomeLink button, NOTE: while you push and release (“cycle”) your hand-held • If the indicator light stays on constantly, program- transmitter every two seconds until HomeLink has ming is complete and the garage door/device should successfully accepted the frequency signal.
Page 275: Using Homelink
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 273 2. Push and hold the desired HomeLink button until the Security indicator light begins to flash after 20 seconds. Do not It is advised to erase all channels before you sell or turn release the button.
Page 276: General Information
274 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • Did you unplug the device for programming and WARNING! (Continued) remember to plug it back in? required by Federal safety standards. This includes If you have any problems, or require assistance, please most garage door opener models manufactured call toll-free 1-800-355-3515 or, on the Internet at after 1982.
Page 277: Power Sunroof - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 275 NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console.
Page 278: Opening Sunroof - Express
276 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Opening Sunroof — Express WARNING! (Continued) Push the switch rearward and release it within one-half accessible to children. Do not leave the ignition of second. The sunroof and sunshade will open automati- a vehicle equipped with Keyless Enter-N-Go in the cally from any position.
Page 279: Closing Sunroof - Manual Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 277 position. The sunroof will close fully and stop automati- NOTE: If three consecutive sunroof close attempts result cally. This is called “Express Close.” During Express in Pinch Protect reversals, Pinch Protect will disable and Close operation, any other actuation of the switch will the sunroof must be closed in Manual Mode.
Page 280: Wind Buffeting
278 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Wind Buffeting Ignition Off Operation Wind buffeting can be described as the perception of For Vehicles Not Equipped With The Electronic Vehicle pressure on the ears or a helicopter-type sound in the Information Center (EVIC) ears.
Page 281: Electrical Power Outlets - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 279 ELECTRICAL POWER OUTLETS — IF EQUIPPED Two 12 Volt (13 Amp) power outlets are located on the lower instrument panel, below the open storage bin. The driver-side power outlet is controlled by the ignition switch and the passenger-side power outlet is connected directly to the battery.
Page 282 280 UNDERSTANDING THE FEATURES OF YOUR VEHICLE One outlet in the removable floor console (if equipped) CAUTION! shares a fuse with the lower outlet in the instrument • Do not exceed the maximum power of 160 Watts (13 panel and is also connected to the battery. Do not exceed a maximum power of 160 Watts (13 Amps) shared Amps) at 12 Volts.
Page 283 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 281 On vehicles equipped with the Super Console the power The outlet in the rear quarter panel near the liftgate and outlets are located under the retractable cover. To access the upper outlet in the instrument panel are both con- the power outlets push down on the cover and slide it trolled by the ignition switch.
Page 284 282 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! To avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 Volt outlet. • Do not touch with wet hands. •...
Page 285: Power Inverter - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 283 CAUTION! CAUTION! (Continued) • Power outlets are designed for accessory plugs • Many accessories that can be plugged in draw only. Do not hang any type of accessory or acces- power from the vehicle’s battery, even when not in sory bracket from the plug.
Page 286 284 UNDERSTANDING THE FEATURES OF YOUR VEHICLE This outlet can power cellular phones, electronics and other low power devices requiring power up to 150 Watts. Certain high-end video game consoles will exceed this power limit, as will most power tools. The power inverter is designed with built-in overload protection.
Page 287: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 285 Instrument Panel Cupholders WARNING! The instrument panel cupholders are located in a pull-out To avoid serious injury or death: drawer just above the lower storage bin. • Do not insert any objects into the receptacles. •...
Page 288: Super Console - If Equipped
286 UNDERSTANDING THE FEATURES OF YOUR VEHICLE variety of container types and sizes. Push down on the For rear passengers two cupholders are located in the container to engage the cupholder retention features. pull-out drawer, located in the back of the Super Console. Pull the drawer out to the first position to use the Super Console —...
Page 289: Premium Console Cupholders - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 287 Premium Console Cupholders — If Equipped Interior Bottle Holders On models equipped with premium center consoles, There are four bottle holders located in the interior. One there are four cupholders located on the top of the bottle holder is molded into each front interior door trim console.
Page 290: Smoker's Package Kit - If Equipped
288 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Smoker’s Package Kit — If Equipped With the optional authorized dealer-installed Smoker’s Package Kit, a removable ash receiver is inserted into one of the two cupholders in the center front instrument panel. To install the ash receiver, align the receiver so the thumb grip on the lid is facing rearward.
Page 291 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 289 Upper Glove Compartment Lower Glove Compartment To open the upper compartment, push in on the button, To open the lower compartment pull out on the release located on the left side of the upper door. The door will handle.
Page 292: Door Trim Panel Storage
290 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Door Trim Panel Storage Front Door Storage Both interior front door panels have multiple pockets for storage. WARNING! If containers of hot liquid are placed in the bottle holder, they can spill when the door is closed, burn- ing the occupants.
Page 293: Umbrella Holder
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 291 Umbrella Holder Second Row Floor Storage Bins An umbrella holder has been conveniently molded into The area below the floor covers, located in front of the the left front door entry scuff molding. second row seats, is available for storage.
Page 294: Storage Bin Safety Warning
292 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Pull up on the storage bin latch to open the cover. Slide WARNING! (Continued) the storage bin locking mechanism to the unlocked • Do not operate the storage bin covers while the position to allow greater access to the storage bin. vehicle is in motion.
Page 295 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 293 WARNING! (Continued) CAUTION! • Do not allow children to have access to the second The storage bin cover must be flat and locked to row seat storage bins. Once in the storage bin, avoid damage from contact with the front seat tracks, young children may not be able to escape.
Page 296: Center And Rear Overhead Console Storage - If Equipped
294 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Center And Rear Overhead Console Storage — If Equipped The overhead storage system comes in several options. Storage Bin Cover Emergency Release Lever NOTE: In the event of an individual being locked inside the storage bin, the storage bin cover can be opened from inside of the bin by pushing on the glow-in-the-dark lever attached to the storage bin cover latching mecha-...
Page 297: Coat Hooks
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 295 Coat Hooks Coat hooks are located along the headliner for the second and third row seating positions. The coat hook load limit is 10 lbs (4.5 kg). Exceeding the recommended load limit can cause the coat hooks to break or disengage from the vehicle.
Page 298: Console Features
296 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONSOLE FEATURES There are three consoles available: Basic, Premium and Super. WARNING! Do not operate this vehicle with a console compart- ment lid in the open position. Driving with the console compartment lid open may result in injury in a collision.
Page 299 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 297 • The cupholders are removable to access a large storage 3. Align the console until the front anchor cup plug hole bin. is centered on the winch hole. • The basic console is removable from the vehicle for 4.
Page 300: Premium Console - If Equipped
298 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • 12 Volt DC power outlet provides continuous power Premium Console — If Equipped inside the console for cell phones or other electronics The three-compartment console with sliding storage bin, • Rear occupant accessible sliding upper tray with storage and large console storage bin offers multiple configurations.
Page 301 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 299 Position 1 shows the console closed with four cupholders Position 2 shows the raised storage tray revealing a large and a convenient storage tray. storage area below. Console Position 1 Console Position 2...
Page 302 300 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dual Storage Bins Position 4 shows the complete console in its rearmost position. Again, lifting second latch handle at the front of Position 3 shows the top portion of the console in a the console, allows complete access to a lower storage bin rearward position.
Page 303: Super Console - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 301 To Remove The Premium Floor Console 5. Pull up on the console to be sure it is firmly latched. 1. Pull up on the bottom release handle in the front of the WARNING! console.
Page 304 302 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Front Lower Pass Through Super Console The Super Console tambour doors are opened by push- 1 — Front Sliding Tambour Door ing down on the finger tabs and sliding the door. The 2 — Cupholder Light Ring front tambour door slides forward, the rear tambour door 3 —...
Page 305: Rear Window Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 303 NOTE: The front cupholder light ring and pass through REAR WINDOW FEATURES lighting is controlled by a dimming switch located on the Rear Window Defroster instrument panel, refer to “Lights” in “Understanding The Features Of Your Vehicle” for further information. The rear window defroster button is located on Located in the back of the Super Console is a storage the climate control (Mode) knob.
Page 306: Roof Luggage Rack - If Equipped
304 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • To prevent excessive battery drain, use the rear win- LOAD LEVELING SYSTEM — IF EQUIPPED dow defroster only when the engine is operating. The automatic load leveling system will provide a level- riding vehicle under most passenger and cargo loading CAUTION! conditions.
Page 307: Deploying The Crossbars
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 305 vehicle. Be sure the total load of cargo inside the vehicle The crossbars and side rails are designed to carry weight plus that on the external rack does not exceed the on vehicles equipped with a luggage rack. The load must maximum vehicle load capacity.
Page 308 306 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Bend the crossbar supports at each end, taking care to keep hand clear of pivoting joint. Slide the thumb screw down. Loosening Crossbars CAUTION! Stowed Position Use care when removing and handling the crossbars to prevent damage to the vehicle.
Page 309 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 307 Deployed Position Deploy Positions – Choose Two Of Three Then, position the crossbars across the roof. Make sure the directional arrows on the crossbars align with the directional arrows on the side rails. Set the NOTE: The crossbars are identical and can be placed in crossbars into the deployed positions.
Page 310 308 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Crossbar To Side Rail Installation Tightening Crossbar Once the crossbars are set into position, tighten the Stowing The Crossbars thumb screws completely. Reverse the procedure to stow the crossbars, again, taking care to keep hand clear of pivoting joint. Crossbars are identical and can be stowed in either rail nest.
Page 311 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 309 NOTE: Load should always be secured to crossbars first, CAUTION! with rail tie down loops used as additional securing • Check deployed crossbars frequently and retighten points if needed. Tie loops are intended as supplemen- tary tie down points only.
Page 312: Sun Screens - If Equipped
310 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! (Continued) WARNING! • Long loads which extend over the windshield, such Cargo must be securely tied before driving your as wood panels or surfboards, or loads with large vehicle. Improperly secured loads can fly off the frontal area should be secured to both the front and vehicle, particularly at high speeds, resulting in per- rear of the vehicle.
Page 313 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 311 Sun Screen Retracted Sun Screen Extended Gently pull up on the tab to raise the sun screen. To lower the sun screen, gently lift the tab upward to Continue pulling the sun screen until the tab is near the disengage the hooks, and feed the screen back into the top of the window.
Page 315 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..318 ELECTRONIC VEHICLE INFORMATION CENTER (EVIC) — IF EQUIPPED ....352 INSTRUMENT CLUSTER —...
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Vehicle Info (Customer Information Features) . .362 UCONNECT 130 ..... . .375 ▫ Messages # ......362 ▫...
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 ▫ Operating Instructions (Uconnect Phone) — If ▫ Getting Started ..... . .408 Equipped ......401 ▫...
Page 318 316 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ VES Remote Control — If Equipped ..426 ▫ Information Mode Display ....439 ▫ Blu-ray Player Remote Control — ▫...
Page 319 UNDERSTANDING YOUR INSTRUMENT PANEL 317 ▫ Rear Manual Climate Control — CD/DVD/Blu-ray Disc MAINTENANCE ..457 If Equipped ......464 RADIO OPERATION AND MOBILE DEVICES .
Page 320: Instrument Panel Features
318 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT PANEL FEATURES 1 — Air Vents 5 — Analog Clock 9 — DVD – If Equipped 13 — Ignition Switch 2 — Instrument Cluster 6 — Upper Glove Compartment 10 — Storage Bin 14 — Hood Release 3 —...
Page 321: Instrument Cluster - Base
UNDERSTANDING YOUR INSTRUMENT PANEL 319 INSTRUMENT CLUSTER — BASE...
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Tachometer as it was before the repair or service. If s/he cannot do so, • This gauge measures engine revolutions per minute then the odometer must be set at zero, and a sticker must be placed in the door jamb stating what the mileage was (RPM x 1000).
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 Message Display Area Refer to ”Electronic Vehicle Information Center (EVIC) — If Equipped” in this section for further information. When the appropriate conditions exist, the following odometer messages will display: LoW tirE door ......Door Ajar When the appropriate condition exists, the odometer display will toggle between LoW and tirE for three gATE .
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL damaged, a “noFUSE” message will display in the odom- 1. Turn the ignition switch to the ON/RUN position (do eter display area. Refer to “Fuses” in “Maintaining Your not start the engine). Vehicle” for further information on fuses and fuse loca- 2.
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 3. Speedometer CAUTION! • Indicates vehicle speed. Driving with a hot engine cooling system could 4. Fuel Gauge damage your vehicle. If the temperature gauge reads • The pointer shows the level of fuel in the fuel tank “H”...
Page 326: Instrument Cluster - Premium
324 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — PREMIUM...
Page 327 UNDERSTANDING YOUR INSTRUMENT PANEL 325 1. Tachometer U.S. Federal regulations require that upon transfer of • This gauge measures engine revolutions per minute vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your (RPM x 1000).
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL Message Display Area NOTE: Some of the above warnings will be displayed in the Electronic Vehicle Information Center Display Area When the appropriate conditions exist, the following located in the instrument cluster. odometer messages will display: Refer to ”Electronic Vehicle Information Center (EVIC) —...
Page 329 UNDERSTANDING YOUR INSTRUMENT PANEL 327 noFUSE 4. Fuel Gauge • The pointer shows the level of fuel in the fuel tank If the vehicle diagnostic system determines that the Ignition when the ignition switch is in the ON/RUN position Off Draw (IOD) fuse is improperly installed, or damaged, a •...
Page 330: Warning And Indicator Lights
328 UNDERSTANDING YOUR INSTRUMENT PANEL WARNING AND INDICATOR LIGHTS CAUTION! IMPORTANT: The warning / indicator lights switch on Driving with a hot engine cooling system could in the instrument panel together with a dedicated mes- damage your vehicle. If the temperature gauge reads sage and/or acoustic signal when applicable.
Page 331: Red Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 329 Red Telltale Indicator Lights Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN.
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reser- voir.
Page 334 332 UNDERSTANDING YOUR INSTRUMENT PANEL The light will remain on until the cause is corrected. Brake Warning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required. NOTE: The light may flash momentarily during sharp cornering maneuvers, which change fluid level condi- Operation of the Brake Warning Light can be checked by tions.
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 Battery Charge Warning Light Red Telltale What It Means Light Battery Charge Warning Light This light illuminates when the battery is not charging properly. If it stays on while the en- gine is running, there may be a malfunction with the charging system. Contact your autho- rized dealer as soon as possible.
Page 336 334 UNDERSTANDING YOUR INSTRUMENT PANEL Coolant Temperature Warning Light Red Telltale What It Means Light Coolant Temperature Warning Light This light warns of an overheated engine condition. If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle.
Page 337 UNDERSTANDING YOUR INSTRUMENT PANEL 335 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Pressure Warning Light Red Telltale What It Means Light Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the ve- hicle and shut off the engine as soon as possible. A chime will sound when this light turns Do not operate the vehicle until the cause is corrected.
Page 339 UNDERSTANDING YOUR INSTRUMENT PANEL 337 Transmission Temperature Warning Light Red Telltale What It Means Light Transmission Temperature Warning Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage. If this light turns on, safely pull over and stop the vehicle. Then, place the trans- mission into NEUTRAL and run the engine at idle speed or apply light foot pressure to increase the engine speed RPM until the Transmission Temperature light turns off.
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL Door Open Warning Light — If Equipped Red Telltale What It Means Light Door Open Warning Light This indicator will illuminate when a door is ajar/open and not fully closed. NOTE: If the vehicle is moving, there will also be a single chime. Liftgate Open Warning Light Red Telltale What It Means...
Page 341: Yellow Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 339 Yellow Telltale Indicator Lights Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the igni- tion switch is placed in the ON/RUN position and may stay on for as long as four seconds.
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light — If Equipped The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position, and when ESC is activated.
Page 343 UNDERSTANDING YOUR INSTRUMENT PANEL 341 Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light indicates the Electronic Stability Control (ESC) is off. Loose Fuel Filler Cap Indicator Light —...
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 1.5 gal (5.8 L) this light will turn on, and remain on until fuel is added. Low Washer Fluid Indicator Light —...
Page 345 UNDERSTANDING YOUR INSTRUMENT PANEL 343 Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start.
Page 346 344 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! WARNING! Prolonged driving with the Malfunction Indicator A malfunctioning catalytic converter, as referenced Light (MIL) on could cause damage to the engine above, can reach higher temperatures than in normal control system. It also could affect fuel economy and operating conditions.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means Light Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.
Page 348 346 UNDERSTANDING YOUR INSTRUMENT PANEL vehicle has tires of a different size than the size indicated Please note that the TPMS is not a substitute for proper on the vehicle placard or tire inflation pressure label, you tire maintenance, and it is the driver’s responsibility to should determine the proper tire inflation pressure for maintain correct tire pressure, even if under-inflation has those tires.
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 of reasons, including the installation of replacement or CAUTION! (Continued) alternate tires or wheels on the vehicle that prevent the cause the Tire Pressure Monitoring System (TPMS) TPMS from functioning properly. Always check the sensor to become inoperable. After using an after- TPMS malfunction telltale after replacing one or more market tire sealant it is recommended that you take tires or wheels on your vehicle, to ensure that the...
Page 350: Green Telltale Indicator Lights
348 UNDERSTANDING YOUR INSTRUMENT PANEL Green Telltale Indicator Lights Turn Signal Indicator Lights Green Tell- What It Means tale Light Turn Signal Indicator Lights The instrument cluster directional arrow will flash independently for the LEFT or RIGHT turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multifunction lever is moved down (LEFT) or up (RIGHT).
Page 351 UNDERSTANDING YOUR INSTRUMENT PANEL 349 Park/Headlight ON Indicator Light Green Telltale What It Means Light Park/Headlight ON Indicator Light This indicator will illuminate when the park lights or headlights are turned on. Front Fog Indicator Light — If Equipped Green Telltale What It Means Light Front Fog Indicator Light —...
Page 352: Blue Telltale Indicator Lights
350 UNDERSTANDING YOUR INSTRUMENT PANEL Blue Telltale Indicator Lights High Beam Indicator Light Blue Telltale What It Means Light High Beam Indicator Light This indicator shows that the high beam headlights are on. Push the multifunction control lever away from you to switch the headlights to high beam. Pull the lever toward you to switch the headlights back to low beam.
Page 353: White Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 351 White Telltale Indicator Lights Cruise Control Cancelled Light White Telltale What It Means Light Cruise Control Cancelled Light This light will turn on when the cruise control has been cancelled by the driver. Refer to “Electronic Speed Control”...
Page 354: Electronic Vehicle Information Center (Evic) - If Equipped
352 UNDERSTANDING YOUR INSTRUMENT PANEL ELECTRONIC VEHICLE INFORMATION CENTER The EVIC Menu items consists of the following: (EVIC) — IF EQUIPPED • Fuel Economy The Electronic Vehicle Information Center (EVIC) fea- • Vehicle Speed tures a driver-interactive display that is located in the •...
Page 355 UNDERSTANDING YOUR INSTRUMENT PANEL 353 • UP Button The system allows the driver to select information by pushing the following buttons mounted on the steering Push and release the UP button to scroll up- wheel: ward through the main menu items (Fuel Economy, Vehicle Info, Tire PSI, Cruise, Mes- sages, Units, System Setup).
Page 356: Electronic Vehicle Information Center (Evic) Displays
354 UNDERSTANDING YOUR INSTRUMENT PANEL Once the RIGHT button has been selected for the desired The main display area will normally display the main submenu list, follow the EVIC prompts to properly select menu or the screens of a selected feature of the main the desired submenu EVIC features.
Page 357 UNDERSTANDING YOUR INSTRUMENT PANEL 355 • Unstored Messages seconds and then returns to the previous screen. Ex- amples of this message type are Memory System Un- This message type is displayed indefinitely or until the available - Not in Park and Automatic High Beams On. condition that activated the message is cleared.
Page 358 356 UNDERSTANDING YOUR INSTRUMENT PANEL • Remote start disabled — Start Vehicle to Reset • Service TPM System (refer to “Tire Pressure Monitor- ing System” in “Starting And Operating”) • Remote start active — Push Start Button • Tire Pressure Screen With Low Tire(s) “Inflate Tire to •...
Page 359: Oil Change Required
UNDERSTANDING YOUR INSTRUMENT PANEL 357 • Park Assist Disabled system is permanently unavailable. The driver will receive an EVIC message and the BSM display warn- • Service Park Assist System ing in both mirrors will be permanently illuminated. If • Personal Settings Not Available — Vehicle Not in Park this message is present, see an authorized dealer.
Page 360: Fuel Economy
358 UNDERSTANDING YOUR INSTRUMENT PANEL To reset the oil change indicator system (after performing 2. Fully depress the accelerator pedal, slowly, three times the scheduled maintenance) refer to the following proce- within 10 seconds. dure. 3. Turn the ignition switch to the OFF/LOCK position. Vehicles Equipped With Keyless Enter-N-Go NOTE: If the indicator message illuminates when you 1.
Page 361 UNDERSTANDING YOUR INSTRUMENT PANEL 359 Average Fuel Economy Shows the average fuel economy since the last reset. The Average Fuel Economy can be reset by following the prompt in the EVIC to use the RIGHT button. When the fuel economy is reset, the display will read “zero” for two seconds.
Page 362: Vehicle Speed
360 UNDERSTANDING YOUR INSTRUMENT PANEL Distance To Empty (DTE) Current Fuel Economy (MPG or L/100 km) Shows the estimated distance that can be traveled with This display shows the instantaneous MPG or L/100 km the fuel remaining in the tank. This estimated distance is in bar graph form while driving.
Page 363: Trip Info
UNDERSTANDING YOUR INSTRUMENT PANEL 361 Trip Info Elapsed Time Push and release the UP or DOWN button until “Trip Shows the total elapsed time of travel since the last reset Info” is highlighted in the EVIC and push the RIGHT when the ignition switch is in the ACC position.
Page 364: Units
362 UNDERSTANDING YOUR INSTRUMENT PANEL • Coolant Temp Units Push and release the UP or DOWN arrow button Displays the actual coolant temperature. until “Units” displays highlighted in the EVIC and • Oil Temp push the RIGHT arrow button. The EVIC, odom- eter, and navigation system (if equipped) can be Displays the actual oil temperature.
Page 365: Keyless Enter-N-Go Display - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 363 than one message to step through the remaining NOTE: The system will display the last known outside stored messages. Pushing the BACK button takes you temperature when starting the vehicle and may need to back to the Main Menu. be driven several minutes before the updated tempera- ture is displayed.
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL Manual Compass Calibration 5. Complete one or more 360–degree turns (in an area free from large metal or metallic objects) until the If the compass appears erratic and the CAL indicator “CAL” indicator turns off. The compass will now does not appear in the EVIC display, you must put the function normally.
Page 367: Turn Menu Off
UNDERSTANDING YOUR INSTRUMENT PANEL 365 NOTE: Keep magnetic materials away from the top of 1. Turn the ignition switch ON. the instrument panel, such as iPod’s, Mobile Phones, 2. Push and release the UP or DOWN button until the Laptops and Radar Detectors. This is where the compass Setup (Customer-Programmable Features) menu is module is located, and it can cause interference with the reached, then push the RIGHT button.
Page 368: Customer-Programmable Features (System Setup)
366 UNDERSTANDING YOUR INSTRUMENT PANEL Customer-Programmable Features (System in this display and scroll through the language Setup) choices. Push and release the RIGHT arrow button to select English, Spanish (Español), or French (Fran- Personal Settings allows you to set and recall features çais).
Page 369 UNDERSTANDING YOUR INSTRUMENT PANEL 367 position and the vehicle speed is less than 11 mph or NEUTRAL position and the driver’s door is opened. To (18 km/h). The system can be enabled with Sound Only, make your selection, push and release the Right arrow Sound and Display, or turned OFF through the EVIC.
Page 370 368 UNDERSTANDING YOUR INSTRUMENT PANEL RKE Linked To Memory- If Equipped RIGHT arrow button until a check-mark appears next to the feature showing the system has been activated or the When this feature is selected, the memory seat, mirror, check-mark is removed showing the system has been and radio settings will return to the memory set position deactivated.
Page 371 UNDERSTANDING YOUR INSTRUMENT PANEL 369 showing the system has been activated or the check-mark Headlamps With Wipers (Available With Auto is removed showing the system has been deactivated. Headlights Only) When ON is selected, and the headlight switch is in the Automatic High Beams —...
Page 372 370 UNDERSTANDING YOUR INSTRUMENT PANEL the RIGHT button until a check-mark appears next to the Illuminated Approach feature showing the system has been activated or the When this feature is selected, the headlights will activate check-mark is removed showing the system has been and remain on for up to 90 seconds when the doors are deactivated.
Page 373 UNDERSTANDING YOUR INSTRUMENT PANEL 371 signaling other drivers that someone may be exiting or Easy Exit Seat entering the vehicle. To make your selection, push and This feature provides automatic driver seat positioning to release the RIGHT arrow button until a check-mark enhance driver mobility when entering and exiting the appears next to the feature showing the system has vehicle.
Page 374 372 UNDERSTANDING YOUR INSTRUMENT PANEL To make your selection, push and release the RIGHT an audible alert when the turn signal is on. When “Blind button until a check-mark appears next to the feature Spot Alert Off” is selected, the Blind Spot Monitor (BSM) showing the system has been activated, or the check- system is deactivated.
Page 375: Cybersecurity
UNDERSTANDING YOUR INSTRUMENT PANEL 373 Compass Variance software updates to improve the usability and perfor- mance of your systems or to reduce the potential risk of Refer to “Electronic Vehicle Information (EVIC)” in “Un- unauthorized and unlawful access to your vehicle sys- derstanding Your Instrument Panel”...
Page 376 374 UNDERSTANDING YOUR INSTRUMENT PANEL • To help further improve vehicle security and minimize WARNING! (Continued) the potential risk of a security breach, vehicle owners • ONLY insert media (e.g., USB, SD card, or CD) into should: your vehicle if it came from a trusted source. Media •...
Page 377: Uconnect 430/430N Cd/Dvd/Hdd/Nav
UNDERSTANDING YOUR INSTRUMENT PANEL 375 UCONNECT 430/430N CD/DVD/HDD/NAV — IF UCONNECT 130 EQUIPPED Refer to your Uconnect Supplement Manual for detailed operating instructions. Operating Instructions (Voice Command System) — If Equipped Refer to “Voice Command” for further details. Operating Instructions (Uconnect Phone) — If Equipped Refer to “Uconnect Phone”...
Page 378: Operating Instructions - Radio Mode
376 UNDERSTANDING YOUR INSTRUMENT PANEL Operating Instructions — Radio Mode SEEK Buttons Push and release the SEEK buttons to search for the next NOTE: The ignition switch must be in the ON or ACC listenable station in AM/FM mode. Push the right switch position to operate the radio.
Page 379 UNDERSTANDING YOUR INSTRUMENT PANEL 377 3. After adjusting the hours, push the right side TUNE/ Setting The Tone, Balance And Fade SCROLL control knob to set the minutes. The minutes Push the rotary TUNE/SCROLL control knob and BASS will begin to blink. will display.
Page 380 378 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob a fifth time SET/RND button, the station will continue to play but and FADE will display. Turn the TUNE/SCROLL control will not be stored into pushbutton memory. knob to the left or right to adjust the sound level between You may add a second station to each pushbutton by the front and rear speakers.
Page 381: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 379 DISC Button radio display. If a CD does not go into the slot more than 1 inch (2.5 cm), a disc may already be loaded and must be Pushing the DISC button will allow you to switch from ejected before a new disc can be loaded.
Page 382 380 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Ejecting with the ignition OFF is not allowed on CAUTION! (Continued) convertible or soft-top models (if equipped.) • The Uconnect 130 is a single CD player. Do not SEEK Button attempt to insert a second CD if one is already loaded.
Page 383: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 381 RW/FF Notes On Playing MP3 Files Push and hold the FF (Fast Forward) button and the CD The radio can play MP3 files; however, acceptable MP3 player will begin to fast forward until FF is released, or file recording media and formats are limited.
Page 384 382 UNDERSTANDING YOUR INSTRUMENT PANEL The radio uses the following limits for file systems: Multi-session disc formats are supported by the radio. Multi-session discs may contain combinations of normal • Maximum number of folder levels: 8 CD audio tracks and computer files (including MP3 files). •...
Page 385 UNDERSTANDING YOUR INSTRUMENT PANEL 383 use a 44.1 kHz sampling rate and a 192, 160, 128, 96 or Playback Of MP3 Files VBR bit rate. When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG Specifi- Sampling Fre- contains a lot of folders or files, the radio will take more...
Page 386: Operation Instructions - Auxiliary Mode
384 UNDERSTANDING YOUR INSTRUMENT PANEL Operation Instructions — Auxiliary Mode UCONNECT 130 WITH SATELLITE RADIO The auxiliary (AUX) jack is an audio input jack, which allows the user to plug in a portable device, such as an MP3 player, or iPod, and utilize the vehicle’s audio system to amplify the source and play through the vehicle speakers.
Page 387 UNDERSTANDING YOUR INSTRUMENT PANEL 385 Power Switch/Volume Control (Rotary) another selection. Holding either button will bypass stations without stopping, until you release it. Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second Voice Command System (Radio) —...
Page 388 386 UNDERSTANDING YOUR INSTRUMENT PANEL Phone Button Uconnect Phone — If Equipped 3. After adjusting the hours, push the right side TUNE/ SCROLL control knob to set the minutes. The minutes Push this button to operate the Uconnect Phone feature will begin to blink.
Page 389 UNDERSTANDING YOUR INSTRUMENT PANEL 387 INFO Button Push the rotary TUNE/SCROLL control knob a second time and MID will display. Turn the TUNE/SCROLL Push the INFO button for an RDS station (one with call control knob to the right or left to increase or decrease the letters displayed).
Page 390 388 UNDERSTANDING YOUR INSTRUMENT PANEL Push the rotary TUNE/SCROLL control knob again to 16-Digit Character Program Type exit setting tone, balance, and fade. Display MUSIC TYPE Button Classical Classicl Classic Rock Cls Rock Pushing this button once will turn on the Music Type mode for five seconds.
Page 391 UNDERSTANDING YOUR INSTRUMENT PANEL 389 If a preset button is activated while in the Music Type 16-Digit Character Program Type (Program Type) mode, the Music Type mode will be Display exited and the radio will tune to the preset station. Religious Talk Rel Talk SETUP Button...
Page 392 390 UNDERSTANDING YOUR INSTRUMENT PANEL AM/FM Button and 12 FM stations to be stored into pushbutton memory. The stations stored in SET 2 memory can be selected by Push the button to select either AM or FM mode. pushing the pushbutton twice. SET/RND Button —...
Page 393: Operation Instructions - Cd Mode For Cd And Mp3 Audio Play
UNDERSTANDING YOUR INSTRUMENT PANEL 391 Operation Instructions — CD MODE For CD And If you insert a disc with the ignition ON/RUN and the MP3 Audio Play radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display NOTE: will show the track number, and index time in minutes •...
Page 394 392 UNDERSTANDING YOUR INSTRUMENT PANEL of the current selection, or return to the beginning of the CAUTION! (Continued) previous selection if the CD is within the first second of • Dual-media disc types (one side is a DVD, the the current selection. Pushing and holding the SEEK other side is a CD) should not be used, and they can button will allow faster scrolling through the tracks in cause damage to the player.
Page 395: Notes On Playing Mp3 Files
UNDERSTANDING YOUR INSTRUMENT PANEL 393 SET/RND Button (Random Play Button) Supported Media (Disc Types) Push this button while the CD is playing to activate The MP3 file recording media supported by the radio are Random Play. This feature plays the selections on the CDDA, CD-R, CD-RW, MP3, and CDDA+MP3.
Page 396 394 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum number of folders. (The radio display of file writing are most likely multi-session discs. The use of names and folder names is limited. For large numbers multi-session for CD audio or MP3 playback may result of files and/or folders, the radio may be unable to in longer disc loading times.
Page 397 UNDERSTANDING YOUR INSTRUMENT PANEL 395 Playback Of MP3 Files MPEG Specifi- Sampling Fre- Bit Rate (kbps) cation quency (kHz) When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium MPEG-1 Audio 48, 44.1, 32 320, 256, 224, contains a lot of folders or files, the radio will take more...
Page 398: List Button - Cd Mode For Mp3 Play
396 UNDERSTANDING YOUR INSTRUMENT PANEL To increase the speed of disc loading, it is recommended Push the INFO button once more to return to elapsed to use CD-R media and single-session discs. To create a time priority mode. single-session disc, enable the “Disc at Once” option Push and hold the INFO button for three seconds or more before writing to the disc.
Page 399: Uconnect (Satellite Radio) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 397 TIME Button (Auxiliary Mode) System Activation Push this button to change the display to time of day. The Sirius Satellite Radio service is pre-activated, and you time of day will display for five seconds (when the may begin listening immediately to the one year of audio ignition is OFF).
Page 400 398 UNDERSTANDING YOUR INSTRUMENT PANEL To access the ESN/SID, refer to the following steps: decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within ESN/SID Access the loading design of the rack. Do not place items directly With the ignition switch in the ON/RUN or ACC posi- on or above the antenna.
Page 401 UNDERSTANDING YOUR INSTRUMENT PANEL 399 Operating Instructions — Uconnect (Satellite) INFO Button Mode Pushing the INFO button will cycle the display informa- tion between Artist, Song Title, and Composer (if avail- NOTE: The ignition switch must be in the ON/RUN or able).
Page 402 400 UNDERSTANDING YOUR INSTRUMENT PANEL MUSIC TYPE Button SETUP Button Pushing this button once will turn on the Music Type Pushing the SETUP button allows you to select the mode for five seconds. Pushing the MUSIC TYPE button following items: or turning the TUNE/SCROLL control knob within five •...
Page 403: Operating Instructions (Uconnect Phone) - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 401 You may add a second channel to each pushbutton by SETTING THE ANALOG CLOCK repeating the above procedure with this exception: Push To set the analog clock at the top center of the instrument the SET button twice and SET 2 will show in the display panel, press and hold the button until the setting is window.
Page 404: Ipod/Usb/Mp3 Control - If Equipped
402 UNDERSTANDING YOUR INSTRUMENT PANEL iPod/USB/MP3 CONTROL — IF EQUIPPED Connecting The iPod Or External USB Device This feature allows an iPod or external USB device to be Use the connection cable to connect an iPod or external plugged into the USB port, located in the glove compart- USB device to the vehicle’s USB connector port which is ment.
Page 405: Using This Feature
UNDERSTANDING YOUR INSTRUMENT PANEL 403 NOTE: The glove compartment will have a position Using This Feature where the iPod or consumer electronic audio device cable By using an external USB device to connect to the USB can be routed through without damaging the cable when port: closing the lid.
Page 406: Play Mode
404 UNDERSTANDING YOUR INSTRUMENT PANEL • Jump backward in the current track by pushing and control mode, audio tracks (if available from audio device) start playing over the vehicle’s audio system. holding the << RW button. Holding the << RW button long enough will jump to the beginning of the current Play Mode track.
Page 407: List Or Browse Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 405 the next screen of data for that track. Once all screens device, or push the VR button and say Shuffle ON or have been viewed, the last INFO button push will go Shuffle Off. If the RND icon is showing on the radio back to the play mode screen on the radio.
Page 408 406 UNDERSTANDING YOUR INSTRUMENT PANEL through the list faster. During fast scroll, a slight delay Pushing a PRESET button will display the current list on in updating the information on the radio display may the top line and the first item in that list on the second be noticeable.
Page 409: Bluetooth Streaming Audio (Btsa)
UNDERSTANDING YOUR INSTRUMENT PANEL 407 Bluetooth Streaming Audio (BTSA) CAUTION! Music can be streamed from your cellular phone to the • Leaving the iPod or external USB device (or any Uconnect phone system. supported device) anywhere in the vehicle in ex- Refer to the Uconnect Radio Supplement for further treme heat or cold can alter the operation or dam- information on Bluetooth connectivity.
Page 410: Uconnect Multimedia - Video
408 UNDERSTANDING YOUR INSTRUMENT PANEL Selecting A Different Audio Device Browse Browsing is not available on a Bluetooth Streaming 1. Push the Phone button to begin. Audio (BTSA) device. Only the current song that is 2. After the Ready prompt and following the beep, say playing will display info.
Page 411 UNDERSTANDING YOUR INSTRUMENT PANEL 409 • Turn on the Player (if equipped on Dual Screen Sys- tem) by pushing the Power button, located on the far left, or by pushing the button on the Remote Control. • When the Video Screen(s) are open and a DVD/Blu- ray Disc is inserted into the VES player, the screen(s) turn(s) on automatically, the headphone transmitters turn on and playback begins.
Page 412: Blu-Ray Disc Player
410 UNDERSTANDING YOUR INSTRUMENT PANEL • Press the 1 button on the touchscreen to select an audio Blu-ray Disc Player channel, then press the VES Disc button on the touch- Play A Blu-ray Disc screen in the media column. To view a Blu-ray disc, insert the disc into the Blu-ray Using The Remote Control VES disc Player.
Page 413: Play Video Games
UNDERSTANDING YOUR INSTRUMENT PANEL 411 Play Video Games When connecting an external source to the AUX input, be sure to follow the standard color coding for the VES Connect the video game console to the Auxiliary RCA jacks: input jacks or HDMI port, located on the left side behind the second row seat.
Page 414 412 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Press the Rear VES button on the touchscreen to display the Rear VES Controls. If a channel list is displayed, press the HIDE LIST button on the touch- screen to display the Rear VES Controls screen. Select VES AUX1 Mode On The VES Screen Using The Touchscreen Radio Controls 1.
Page 415: Listen To An Audio Source On Channel 2 While A Video Is Playing On Channel 1
UNDERSTANDING YOUR INSTRUMENT PANEL 413 3. Press the 1 button on the touchscreen and then press Listen To An Audio Source On Channel 2 While A either AUX 1 or AUX 2 in the VES column (depending Video Is Playing On Channel 1 which AUX input is used).
Page 416 414 UNDERSTANDING YOUR INSTRUMENT PANEL 2. While looking at the video screen, either push Up/ Using The Touchscreen Radio Controls Down/Left/Right on the Remote Control to highlight 1. Press the MENU button on the radio faceplate. the desired audio source or repeatedly push the 2.
Page 417: Dual Video Screen
UNDERSTANDING YOUR INSTRUMENT PANEL 415 3. To listen to an audio source on Channel 2 while a Dual Video Screen video is playing on Channel 1, press the 2 button on NOTE: Typically there are two different ways to operate the touchscreen and choose an audio source.
Page 418 416 UNDERSTANDING YOUR INSTRUMENT PANEL 3. To watch a DVD on Screen 1 for second row passen- gers, ensure the Remote Control and Headphone switch is on Channel 1. 4. To watch a DVD on Screen 2 for third row passengers, ensure the Remote Control and Headphone switch is on Channel 2.
Page 419 UNDERSTANDING YOUR INSTRUMENT PANEL 417 • The VES will retain the last setting when turned off. Using The Touchscreen Radio Controls 1. Push the MENU button on the radio faceplate. 2. Press the Rear VES button on the touchscreen to display the Rear VES Controls.
Page 420: Play A Dvd Using The Ves Player - If Equipped
418 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Play A DVD Using The VES Player — If Equipped • To view a DVD on the radio push the RADIO/MEDIA 1. Insert the DVD with the label facing up. The VES button on the radio faceplate, then press the DISC tab player automatically selects the appropriate mode button on the touchscreen and then the VIEW VIDEO after the disc is recognized and starts playing the...
Page 421 UNDERSTANDING YOUR INSTRUMENT PANEL 419 2. While looking at Screen 1 or 2, highlight VES DISC by NOTE: either pushing Up/Down/Left/Right buttons or by • Channel/Screen 1 select mode information is shown repeatedly pushing the SOURCE button, then push on the left side of the screen. ENTER/OK on the Remote Control.
Page 422 420 UNDERSTANDING YOUR INSTRUMENT PANEL Rear VES Button On The Touchscreen Select Channel/Screen 1 And DISC In The VES Column 3. Press the 1 or 2 button on the touchscreen and then the NOTE: DISC button on the touchscreen in the VES column. To •...
Page 423: Play A Blu-Ray Disc Using The Blu-Ray Player - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 421 • Viewing a DVD on the Touchscreen radio screen is not 3. To watch a Blu-ray Disc on Screen 2 for third row available in all states/provinces. If available, the ve- passengers, ensure the Remote Control and Head- hicle must be stopped and the shift lever must be in the phone switch is on Channel 2.
Page 424: Listen To An Audio Source While A Video Is Playing
422 UNDERSTANDING YOUR INSTRUMENT PANEL • Viewing a Blu-ray Disc on the Touchscreen radio Using The Touchscreen Radio Controls screen is not available in all states/provinces. If avail- 1. Push the MENU button on the radio faceplate. able, the vehicle must be stopped and the shift lever 2.
Page 425 UNDERSTANDING YOUR INSTRUMENT PANEL 423 Using The Remote Control 1. Push the SOURCE button on the Remote Control and the Mode Select Screen will display, unless a video is playing then only a small banner will appear on the bottom of the screen. 2.
Page 426 424 UNDERSTANDING YOUR INSTRUMENT PANEL 2. Press the Rear VES button on the touchscreen to 3. To listen to an audio source on Channel 2 while a display the Rear VES Controls. If a channel list is video is playing on Channel 1, press the 2 button on displayed, press the HIDE LIST button on the touch- the touchscreen and choose an audio source.
Page 427: Important Notes For Dual Video Screen System
UNDERSTANDING YOUR INSTRUMENT PANEL 425 • Selecting a video source on Channel 2, the video Important Notes For Dual Video Screen System source will display on the third row screen or Screen 2 • VES is able to transmit two channels of stereo audio and can be heard on Channel 2.
Page 428 426 UNDERSTANDING YOUR INSTRUMENT PANEL VES Remote Control — If Equipped audio while the screen is closed, push the Power button to turn the headphone transmitter on. 2. Channel Selector Indicators – When a button is pushed, the currently affected channel or channel button is illuminated momentarily.
Page 429 UNDERSTANDING YOUR INSTRUMENT PANEL 427 – In radio modes, push to seek the next tunable pushing PROG Up selects the next preset and push- station. In disc modes, push and hold to fast forward ing PROG Down selects the previous preset stored in through the current audio track or video chapter.
Page 430 428 UNDERSTANDING YOUR INSTRUMENT PANEL 15. SETUP – When in a video mode, push the SETUP – In radio modes, push to seek to the previous button to access the display settings (see the display tunable station. In disc modes, push and hold to fast settings section) to access the DVD setup menu, select rewind through the current audio track or video the menu button on the radio.
Page 431: Blu-Ray Player Remote Control - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 429 Blu-ray Player Remote Control — If Equipped audio while the screen is closed, push the Power button to turn the headphone transmitter on. 2. Channel Selector Indicators – When a button is pushed, the currently affected channel or channel button is illuminated momentarily.
Page 432 430 UNDERSTANDING YOUR INSTRUMENT PANEL equipped) and the VES mode is selected and the disc 12. ▪ (Stop) – Stops disc play. is stopped, push the SETUP button to access the – Push and release to jump to the previous audio Blu-ray Setup menu.
Page 433: Remote Control Storage
UNDERSTANDING YOUR INSTRUMENT PANEL 431 Remote Control Storage The video screen(s) come with a built in storage compart- ment for the remote control which is accessible when the screen is opened. To remove the remote, use your index finger to pull and rotate the remote towards you. Do not try to pull the remote straight down as it will be very difficult to remove.
Page 434: Locking The Remote Control
432 UNDERSTANDING YOUR INSTRUMENT PANEL Locking The Remote Control Replacing The Remote Control Batteries All remote control functionality can be disabled as a The remote control requires two AAA batteries for op- parental control feature. eration. To replace the batteries: •...
Page 435 UNDERSTANDING YOUR INSTRUMENT PANEL 433 If no audio is heard after increasing the volume control, verify that the screen is turned on and in the down position and that the channel is not muted and the headphone channel selector switch is on the desired channel.
Page 436: Blu-Ray Headphones Operation
434 UNDERSTANDING YOUR INSTRUMENT PANEL Blu-ray Headphones Operation The headphones receive two separate channels of audio using an infrared transmitter from the video screen. Front seat occupants receive some headphone audio coverage to allow them to adjust the headphone volume for the young rear seat occupants that may not be able to do so for themselves.
Page 437: Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 435 Controls NOTE: • When both switches are on Channel 1, the Remote is The headphone power indicator and controls are located controlling Channel 1 and the headphones are tuned on the right ear cup. to the audio of the VES Channel 1. NOTE: The rear video system must be turned on before •...
Page 438: Replacing The Headphone Batteries
436 UNDERSTANDING YOUR INSTRUMENT PANEL 4. When the Mode Selection menu appears on screen, Unwired Stereo Headphone Lifetime Limited use the cursor buttons on the remote control to navi- Warranty gate to the available modes and push the OK button to Who Does This Warranty Cover? This warranty covers select the new mode.
Page 439: System Information
UNDERSTANDING YOUR INSTRUMENT PANEL 437 TECHNOLOGY IS NOT LIABLE FOR ANY INJURIES PRODUCTS, AND IS IN LIEU OF ALL OTHER WAR- OR DAMAGES TO PERSONS OR PROPERTY RESULT- RANTIES (EXPRESS OR IMPLIED), INCLUDING ANY ING FROM THE USE OF, OR ANY FAILURE OR DE- WARRANTY OR MERCHANTABILITY OR FITNESS FECT IN, THE PRODUCT, NOR IS UNWIRED LIABLE FOR A PARTICULAR PURPOSE.
Page 440 438 UNDERSTANDING YOUR INSTRUMENT PANEL icon will be visible on the VES screen. When in shared When in shared disc mode both the radio and the VES mode, the same audio source is heard in the shared have control of the video functions. The VES has the headphone channel 1 or channel 2.
Page 441: Information Mode Display
UNDERSTANDING YOUR INSTRUMENT PANEL 439 Information Mode Display Numeric Keypad Menu Information Mode Video Screen Display 1 — Channel 1 Mode 7 — Channel 1 ENTER/OK 2 — Channel 1 Shared Status Button Action 3 — Channel 1 Audio Only/ 8 —...
Page 442: Station List Menu
440 UNDERSTANDING YOUR INSTRUMENT PANEL makes it easy to enter a specific tuner frequency, satellite Station List Menu channel, or track number. To enter the desired digit: When listening to Satellite audio, pushing the remote control’s POP UP/MENU button displays a list of all 1.
Page 443: Disc Menu
UNDERSTANDING YOUR INSTRUMENT PANEL 441 Disc Menu list of all commands which control playback of the disc. Using the options you can activate or cancel Scan play and Random play. Display Settings When watching a video source (DVD Video with the disc in Play mode, Aux Video, etc.), pushing the remote control’s SETUP button activates the Display Settings menu.
Page 444: Listening To Audio With The Screen Closed
442 UNDERSTANDING YOUR INSTRUMENT PANEL Disc Features control the remote DVD player’s (if the remote control’s power button to turn audio on. If equipped) settings of DVD being watched in the remote audio is still not heard, check that fully charged batteries player.
Page 445 UNDERSTANDING YOUR INSTRUMENT PANEL 443 • For DivX files, only DivX Home Theater Profile Ver.3.0 The Blu-Ray Player is capable of the playing the follow- ing types of discs (12 cm diameter): is supported. • BD: BDMV (Profile 1.1), BDAV •...
Page 446 444 UNDERSTANDING YOUR INSTRUMENT PANEL • Maximum field rate for interlaced source 60 fields Video title is ignored). All multi - channel program per second material is automatically mixed down to two channels, which may result in a lowered apparent volume level. If •...
Page 447 UNDERSTANDING YOUR INSTRUMENT PANEL 445 • Mixed media recordable DVD formats will only play compatible format and is playable on other players. To help avoid playback problems, use the following guide- the Video_TS portion of the disc. lines when recording discs. •...
Page 448 446 UNDERSTANDING YOUR INSTRUMENT PANEL • Any file that is copy protected (such as those down- Compressed Audio Files (MP3 / WMA and ACC) loaded from many online music stores) will not play. The DVD/Blu-ray Player (if equipped) is capable of The DVD player will automatically skip the file and playing MP3 (MPEG-1 Audio Layer 3) and WMA (Win- begin playing the next available file.
Page 449 UNDERSTANDING YOUR INSTRUMENT PANEL 447 • To change the current directory, use the remote con- The DVD player may shut down during extremely hot trol’s PROG UP and Down buttons or Rewind/skip conditions, such as when the vehicle’s interior tempera- back and fast fwd/skip forward.
Page 450: Display
448 UNDERSTANDING YOUR INSTRUMENT PANEL Display All of the Language settings have a special Other setting to accommodate languages other than Japanese or Eng- Other Language Setup lish. These languages are selected using a special four- digit code. To enter a new language code, activate the DVD Setup Menu.
Page 451 UNDERSTANDING YOUR INSTRUMENT PANEL 449 selecting the digit, push the remote control’s Right Rating And Password Setup cursor button to select the next digit. Repeat this digit The Rating and Password settings work together to control selection sequence for all four digits. the types of DVDs that your family watches.
Page 452 450 UNDERSTANDING YOUR INSTRUMENT PANEL The default rating is Level 8 (play all discs without a To set the password, activate the DVD Setup Menu and password) and the default password is 0000. follow these additional instructions: • Using the remote control Left and Right cursor but- tons, select the Rating tab.
Page 453 UNDERSTANDING YOUR INSTRUMENT PANEL 451 • Using the remote control’s Up and Down cursor buttons to set the value for the current digit and the remote control’s Right cursor button to select digits, enter the new password. • After the four-digit password is entered, push the remote control’s ENTER/OK button to accept the change.
Page 454: Product Agreement
452 UNDERSTANDING YOUR INSTRUMENT PANEL To set the rating, activate the DVD Setup Menu and Product Agreement follow these additional instructions: Software • Using the remote control’s Left and Right cursor This product contains software licensed under GNU buttons, select the Rating tab. General Public License (GPL) or GNU Lesser General •...
Page 455 UNDERSTANDING YOUR INSTRUMENT PANEL 453 • THIS PRODUCT IS LICENSED UNDER THE AVC AND/OR (ii) DECODE VC-1 VIDEO THAT WAS PATENT PORTFOLIO LICENSE FOR THE PER- ENCODED BY A CONSUMER ENGAGED IN A PER- SONAL AND NON-COMMERCIAL USE OF A CON- SONAL NON-COMMERCIAL ACTIVITY...
Page 456 454 UNDERSTANDING YOUR INSTRUMENT PANEL Center at http://www.cinavia.com. To request additional viewing uses only unless otherwise authorized by information about Cinavia by mail, send a postcard with Macrovision. Reverse engineering or disassembly is your mailing address to: Cinavia Consumer Information prohibited.
Page 457 UNDERSTANDING YOUR INSTRUMENT PANEL 455 ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certi- Trademark fied device must be registered in order to play purchased • Blu-ray Disc, Blu-ray and the logos are trademarks of DivX Video-on-Demand (VOD) movies. To obtain your the Blu-ray Disc Association. registration code, locate the DivX VOD section in your •...
Page 458: Steering Wheel Audio Controls - If Equipped
456 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS — IF The right-hand rocker switch has a pushbutton in the EQUIPPED center, and controls the volume and mode of the sound system. Pushing the top of the rocker switch will increase the volume.
Page 459: Cd Player
UNDERSTANDING YOUR INSTRUMENT PANEL 457 The button located in the center of the left-hand switch CD/DVD/Blu-ray Disc MAINTENANCE will tune to the next preset station that you have pro- To keep a CD/DVD/Blu-ray Disc in good condition, take grammed in the radio preset push-button. the following precautions: CD Player 1.
Page 460: Radio Operation And Mobile Devices
458 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: If you experience difficulty in playing a particular General Information disc, it may be damaged (i.e., scratched, reflective coating This device complies with Part 15 of the FCC Rules and removed, a hair, moisture or dew on the disc) oversized, with Industry Canada licence-exempt RSS standard(s).
Page 461: Manual Heating And Air Conditioning System - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 459 Manual Heating And Air Conditioning System — upper and lower rear outlets. When the front control is in If Equipped Floor, Defrost, or Mix modes, airflow will be directed out of the rear floor outlets. The controls for the manual system in this vehicle contain a series of outer rotary dials and inner push knobs.
Page 462 460 UNDERSTANDING YOUR INSTRUMENT PANEL 1. Left Front Temperature Control 4. Rear Temperature Control — If Equipped Provides left front seat occupant with independent tem- Provides temperature control for the rear cabin. Turn left perature control. Turn left for cooler or right for warmer for cooler or right for warmer temperature settings in the temperature settings.
Page 463 UNDERSTANDING YOUR INSTRUMENT PANEL 461 7. Front Defrost Mode NOTE: • You can turn off the heated mirror feature at anytime Air is directed through the windshield and side by pushing the rear window defroster switch a window demist outlets. Use Defrost mode with second time.
Page 464 462 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: CAUTION! (Continued) • If the Recirculation button is pushed when the • Do not use scrapers, sharp instruments, or abrasive system is in Defrost mode the Recirculation LED window cleaners on the interior surface of the indicator will flash three times to indicate Recircula- window.
Page 465 UNDERSTANDING YOUR INSTRUMENT PANEL 463 10. Air Conditioning (A/C) Button 12. Bi-Level Mode Button Push and release to change the current setting. Air is directed through the panel and floor outlets. The indicator illuminates when ON. NOTE: There is a difference in temperature (in any NOTE: If your air conditioning performance seems conditions other than full cold or full hot), between the lower than expected, check the front of the A/C con-...
Page 466: Rear Manual Climate Control - If Equipped
464 UNDERSTANDING YOUR INSTRUMENT PANEL Economy Mode The rear blower and temperature controls for the rear seat passengers are located in the headliner, near the If ECONOMY mode is desired, push the A/C button to center of the vehicle. turn off the indicator light and the A/C compressor. Rotate the temperature control knob to the desired tem- perature.
Page 467 UNDERSTANDING YOUR INSTRUMENT PANEL 465 Rear Blower Control Rear Temperature Control The rear blower control knob can be manually set to off, To change the temperature in the rear of the vehicle, or any fixed blower speed, by rotating the knob from low rotate the temperature knob counterclockwise to lower to high.
Page 468: Automatic Temperature Control (Atc) - If Equipped
466 UNDERSTANDING YOUR INSTRUMENT PANEL • When occupants in the vehicle select the AUTO mode Bi-Level Mode operation, a comfort temperature can be set by using Air comes from both the headliner outlets and the the temperature up and down buttons, and the auto floor outlets.
Page 469 UNDERSTANDING YOUR INSTRUMENT PANEL 467 2. Blower Control Display This display shows the current Blower speed selection. 3. Left Front Seat Occupant Temperature Display This display shows the temperature setting for the left front seat occupant. 4. Mode Display This display shows the current Mode selection (Panel, Bi-Level, Floor, Mix).
Page 470 468 UNDERSTANDING YOUR INSTRUMENT PANEL 7. Auto Indicator 11. Rear Control Button This indicates when the system is in Auto mode. Provides toggle operation between front control screen and rear control screen. Push the button to activate the 8. Right Front Seat Occupant Temperature Display rear climate control screen and allow the front seat This display shows the temperature setting for the right occupants control over the rear climate settings.
Page 471 UNDERSTANDING YOUR INSTRUMENT PANEL 469 14. Auto Temperature Control Button 17. Mode Control Button Controls airflow temperature, distribution, volume, and Push and release to select between Modes (Panel, Bi- the amount of air recirculation automatically. Push and Level, Floor, Mix). Performing this function will cause the release to select.
Page 472 470 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic Temperature Control (ATC) NOTE: • It is not necessary to move the temperature settings. Automatic Operation The system automatically adjusts the temperature, 1. Push the AUTO button on the front ATC Panel and the mode and fan speed to provide comfort as quickly as words Front Auto will illuminate in the front ATC possible.
Page 473 UNDERSTANDING YOUR INSTRUMENT PANEL 471 Manual Operation Override NOTE: • If the system is in Mix or Defrost Mode, the A/C can This system offers a full complement of manual override features. The AUTO symbol in the front ATC display will be turned off, but the A/C system shall remain active be turned off when the system is being used in the to prevent fogging of the windows.
Page 474 472 UNDERSTANDING YOUR INSTRUMENT PANEL To change the rear system settings: • Push REAR button to change control to rear control mode, Rear display (below) will appear. Control func- tions now operate rear system. • To return to Front screen, push REAR button again, or it will revert to the Front screen after six seconds.
Page 475 UNDERSTANDING YOUR INSTRUMENT PANEL 473 3. Blower Control Display NOTE: In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the head- This display shows the current Blower speed selection. liner outlets and warmer air from the floor outlets. 4.
Page 476 474 UNDERSTANDING YOUR INSTRUMENT PANEL Pushing the Rear Temperature Lock button on the front ATC panel, illuminates a lock symbol in the rear display. The rear temperature and air source are controlled from the front ATC panel. Rear second row occupants can only adjust the rear ATC control when the Rear Temperature Lock button is turned off.
Page 477 UNDERSTANDING YOUR INSTRUMENT PANEL 475 2. Rotate the Rear Blower, Rear Temperature and the Vehicle Information Center (EVIC) — Customer- Rear Mode Control knobs to suit your comfort needs. Programmable Features” in this Section. 3. ATC is selected by adjusting the rear blower knob Rear Blower Control counterclockwise to AUTO.
Page 478 476 UNDERSTANDING YOUR INSTRUMENT PANEL Rear Temperature Control Headliner Mode To change the temperature in the rear of the vehicle, Air comes from the outlets in the headliner. Each rotate the temperature knob counterclockwise to lower of these outlets can be individually adjusted to the temperature, and clockwise to increase the tempera- direct the flow of air.
Page 479: Operating Tips
UNDERSTANDING YOUR INSTRUMENT PANEL 477 Recirculation Control Operating Tips When outside air contains smoke, odors, or high humid- NOTE: Refer to the chart at the end of this section for ity, or if rapid cooling is desired, you may wish suggested control settings for various weather condi- to recirculate interior air by pushing the Recir- tions.
Page 480 478 UNDERSTANDING YOUR INSTRUMENT PANEL coolant selection. Use of the air Recirculation mode Outside Air Intake during Winter months is not recommended, because it Make sure the air intake, located directly in front of the may cause window fogging. windshield, is free of obstructions such as leaves. Leaves collected in the air intake may reduce airflow, and if they Vacation/Storage enter the plenum, they could plug the water drains.
Page 481 UNDERSTANDING YOUR INSTRUMENT PANEL 479 Operating Tips Chart...
Page 483 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....485 AUTOMATIC TRANSMISSION ... .491 ▫ Automatic Transmission ....485 ▫...
Page 484 482 STARTING AND OPERATING ▫ Electronic Roll Mitigation (ERM) ...523 POWER STEERING .....507 ▫...
Page 485 STARTING AND OPERATING 483 ▫ Run Flat Tires — If Equipped ... . .542 ▫ Reformulated Gasoline ....560 ▫...
Page 486 484 STARTING AND OPERATING ▫ Starting ......566 TRAILER TOWING .....573 ▫...
Page 487: Starting Procedures
STARTING AND OPERATING 485 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave the Key Fob in or near the vehicle (or inside and outside mirrors, fasten your seat belt, and if in a location accessible to children), and do not present, instruct all other occupants to buckle their seat leave the ignition (of a vehicle equipped with...
Page 488: Keyless Enter-N-Go - If Equipped
486 STARTING AND OPERATING Do not press the accelerator. Use the Fob with Integrated CAUTION! Key to briefly place the ignition in the START position and release it as soon as the starter engages. The starter Damage to the transmission may occur if the follow- motor will continue to run, and it will disengage auto- ing precautions are not observed: •...
Page 489: Normal Starting
STARTING AND OPERATING 487 Installing And Removing The ENGINE NOTE: The ENGINE START/STOP button should only START/STOP Button be removed or inserted with the ignition in the OFF position (OFF position for Keyless Enter-N-Go). Installing The Button Normal Starting 1. Remove the Key Fob from the ignition switch. Using The ENGINE START/STOP Button 2.
Page 490 488 STARTING AND OPERATING To Turn Off The Engine Using ENGINE 4. If the gear selector is in Neutral, push and release the START/STOP Button ENGINE START/STOP button with the vehicle speed below 5 mph (8 km/h) before the engine will shut off. 1.
Page 491: Extreme Cold Weather
STARTING AND OPERATING 489 starting the vehicle and use the accessories, follow these If Engine Fails To Start steps starting with the ignition switch in the OFF posi- tion: WARNING! 1. Push the ENGINE START/STOP button once to • Never pour fuel or other flammable liquid into the change the ignition switch to the ACC position, throttle body air inlet opening in an attempt to start the vehicle.
Page 492 490 STARTING AND OPERATING the accelerator pedal and the brake pedal, wait 10 to 15 WARNING! (Continued) seconds, then repeat the “Normal Starting” procedure. to “Jump-Starting” in “What To Do In Emergen- Clearing A Flooded Engine (Using Fob With cies” for further information. Integrated Key) Clearing A Flooded Engine (Using ENGINE If the engine fails to start after you have followed the...
Page 493: After Starting
STARTING AND OPERATING 491 that is located on the driver side of the Integrated Power CAUTION! Module. To prevent damage to the starter, wait 10 to 15 WARNING! seconds before trying again. Remember to disconnect the engine block heater After Starting cord before driving.
Page 494 492 STARTING AND OPERATING CAUTION! (Continued) WARNING! (Continued) • Do not shift between PARK, REVERSE, NEU- the engine is idling normally and your foot is TRAL, or DRIVE when the engine is above idle firmly pressing the brake pedal. • Unintended movement of a vehicle could injure speed.
Page 495: Key Ignition Park Interlock
STARTING AND OPERATING 493 WARNING! (Continued) WARNING! (Continued) sure the keyless ignition node is in “OFF” mode, seriously or fatally injured. Children should be remove the Key Fob from the vehicle and lock the warned not to touch the parking brake, brake pedal vehicle.
Page 496: Brake/Transmission Shift Interlock System
494 STARTING AND OPERATING LOCK/OFF position, and the transmission is locked in Fuel Economy (ECON) Mode PARK whenever the ignition switch is in the LOCK/OFF The Fuel Economy (ECON) mode can improve the vehi- position. cle’s overall fuel economy during normal driving condi- tions.
Page 497: Six-Speed Automatic Transmission
STARTING AND OPERATING 495 When the Fuel Economy (ECON) Mode is engaged, the Six-Speed Automatic Transmission vehicle control systems will change the following: The transmission gear position display (located in the • The transmission will upshift sooner and downshift instrument cluster) indicates the transmission gear range. You must press the brake pedal to move the gear selector later.
Page 498 496 STARTING AND OPERATING downshifts can be made using the Electronic Range Select (ERS) shift control (refer to “Electronic Range Select (ERS) Operation” in this section for further infor- mation). Moving the gear selector to the left or right (–/+) while in the DRIVE position will select the highest available transmission gear, and will display that gear in the instrument cluster as 1, 2, 3, etc.
Page 499 STARTING AND OPERATING 497 Never attempt to use PARK while the vehicle is in WARNING! motion. Apply the parking brake when leaving the • Never use the PARK position as a substitute for the vehicle in this range. parking brake. Always apply the parking brake When parking on a level surface, you may shift the fully when parked to guard against vehicle move- transmission into PARK first, and then apply the parking...
Page 500 498 STARTING AND OPERATING WARNING! (Continued) WARNING! (Continued) • It is dangerous to shift out of PARK or NEUTRAL PARK, securing the vehicle against unwanted if the engine speed is higher than idle speed. If movement. • When leaving the vehicle, always make sure the your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- ignition is in the OFF position, remove the key fob...
Page 501 STARTING AND OPERATING 499 WARNING! (Continued) CAUTION! • Do not leave the Key Fob in or near the vehicle (or • Before moving the gear selector out of PARK, you in a location accessible to children), and do not must turn the ignition switch from the LOCK/OFF leave the ignition in a vehicle equipped with position to the ON/RUN position, and also press Keyless Enter-N-Go in the ACC or ON/RUN posi-...
Page 502 500 STARTING AND OPERATING started in this range. Apply the parking brake and shift DRIVE (D) the transmission into PARK if you must leave the vehicle. This range should be used for most city and highway driving. It provides the smoothest upshifts and down- WARNING! shifts, and the best fuel economy.
Page 503 STARTING AND OPERATING 501 During cold temperatures, transmission operation may PARK, REVERSE, and NEUTRAL will continue to oper- be modified depending on engine and transmission ate. The Malfunction Indicator Light (MIL) may be illu- temperature as well as vehicle speed. This feature im- minated.
Page 504 502 STARTING AND OPERATING NOTE: Even if the transmission can be reset, we recom- the left (-) will activate ERS mode, display the current gear mend that you visit your authorized dealer at your earliest in the instrument cluster, and set that gear as the top possible convenience.
Page 505 STARTING AND OPERATING 503 Transmission Gear Position Display Actual Gear(s) Allowed 1–2 1–3 1–4 1–5 1–6 1–6 • The engine coolant has reached an adequate tempera- NOTE: To select the proper gear position for maximum deceleration (engine braking), tap the gear selector to the ture.
Page 506: Driving On Slippery Surfaces
504 STARTING AND OPERATING NOTE: The torque converter clutch will not engage until WARNING! the transmission fluid and engine coolant are warm [usually after 1 to 3 miles (2 to 5 km) of driving]. Because Rapid acceleration on slippery surfaces is dangerous. the engine speed is higher when the torque converter Unequal traction can cause sudden pulling of the clutch is not engaged, it may seem as if the transmission...
Page 507: Driving Through Water
STARTING AND OPERATING 505 2. Slow down if the road has standing water or puddles. Flowing/Rising Water 3. Replace the tires when tread wear indicators first WARNING! become visible. Do not drive on or across a road or path where water 4.
Page 508 506 STARTING AND OPERATING WARNING! CAUTION! (Continued) standing water that is deeper than the bottom of • Driving through standing water limits your vehi- the tire rims mounted on the vehicle. cle’s traction capabilities. Do not exceed 5 mph • Determine the condition of the road or the path (8 km/h) when driving through standing water.
Page 509: Power Steering
STARTING AND OPERATING 507 NOTE: CAUTION! (Continued) • Increased noise levels at the end of the steering wheel damage is not covered by the New Vehicle Limited travel are considered normal and do not indicate that Warranty. there is a problem with the power steering system. •...
Page 510: Power Steering Fluid Check
508 STARTING AND OPERATING Power Steering Fluid Check WARNING! Checking the power steering fluid level at a defined Fluid level should be checked on a level surface and service interval is not required. The fluid should only be with the engine off to prevent injury from moving checked if a leak is suspected, abnormal noises are parts and to ensure accurate fluid level reading.
Page 511 STARTING AND OPERATING 509 The foot operated parking brake is positioned below the When the parking brake is applied with the ignition lower left corner of the instrument panel. To apply the switch in the ON position, the “Brake Warning Light” in parking brake, firmly press the parking brake pedal fully.
Page 512 510 STARTING AND OPERATING difficult to move the gear selector out of PARK. The WARNING! (Continued) parking brake should always be applied whenever the • Allowing children to be in a vehicle unattended is driver is not in the vehicle. dangerous for a number of reasons.
Page 513: Brake System
STARTING AND OPERATING 511 during application, greater pedal force required to slow WARNING! (Continued) or stop, and potential activation of the “Brake System injury. Also be certain to leave the transmission in Warning Light”. PARK. Failure to do so may allow the vehicle to roll In the event power assist is lost for any reason (i.e., and cause damage or injury.
Page 514: Electronic Brake Force Distribution (Ebd)
512 STARTING AND OPERATING Your vehicle may also be equipped with Trailer Sway come on when the ignition switch is turned to the ON Control (TSC). position, have the light repaired as soon as possible. Electronic Brake Force Distribution (EBD) Anti-Lock Brake System (ABS) This function manages the distribution of the braking The Anti-Lock Brake System (ABS) provides increased...
Page 515 STARTING AND OPERATING 513 You also may experience the following when ABS acti- WARNING! (Continued) vates: can cause possible loss of anti-lock braking capa- • The ABS motor noise (it may continue to run for a bility. Installation of such equipment should be short time after the stop).
Page 516: Anti-Lock Brake Warning Light
514 STARTING AND OPERATING If the “Anti-Lock Brake Warning Light” is on, the brake WARNING! (Continued) system should be serviced as soon as possible to restore • The capabilities of an ABS equipped vehicle must the benefits of anti-lock brakes. If the “Anti-Lock Brake never be exploited in a reckless or dangerous Warning Light”...
Page 517: Hill Start Assist (Hsa)
STARTING AND OPERATING 515 unless braking is no longer desired. Once the brake pedal the brake while stopped on an incline, HSA will continue is released, the BAS is deactivated. to hold the brake pressure for a short period. If the driver does not apply the throttle before this time expires, the WARNING! system will release brake pressure and the vehicle will...
Page 518 516 STARTING AND OPERATING • HSA will work in REVERSE gear and all forward WARNING! (Continued) gears. The system will not activate if the transmission safe control of your vehicle. Failure to follow these is in PARK or NEUTRAL. For vehicles equipped with warnings can result in a collision or serious personal a manual transmission, if the clutch is pressed, HSA injury.
Page 519 STARTING AND OPERATING 517 Disabling And Enabling HSA WARNING! (Continued) This feature can be turned on or turned off. To change the incline while resuming acceleration, manually ac- current setting, proceed as follows: tivate the trailer brake or apply more vehicle brake •...
Page 520: Traction Control System (Tcs)
518 STARTING AND OPERATING 4. Start the engine. Traction Control System (TCS) This system monitors the amount of wheel spin of each of 5. Rotate the steering wheel slightly more than one-half the driven wheels. If wheel spin is detected, the TCS may turn to the left.
Page 521 STARTING AND OPERATING 519 counteracting the oversteer or understeer condition. En- Light” begins to flash during acceleration, ease up on the gine power may also be reduced to help the vehicle accelerator and apply as little throttle as possible. Be sure maintain the desired path.
Page 522 520 STARTING AND OPERATING ESC Operating Modes WARNING! (Continued) NOTE: Depending upon model and mode of operation, must never be exploited in a reckless or dangerous the ESC system may have multiple operating modes. manner which could jeopardize the user’s safety or the safety of others.
Page 523 STARTING AND OPERATING 521 To enter the “Partial Off” mode, momentarily push the NOTE: The Electronic Stability Control (ESC) cannot “ESC Off” switch and the “ESC Off Indicator Light” will prevent the natural laws of physics from acting on the illuminate.
Page 524 522 STARTING AND OPERATING vehicle has been driven several miles (kilometers) at NOTE: speeds greater than 30 mph (48 km/h), see your autho- • The “ESC Activation/Malfunction Indicator Light” rized dealer as soon as possible to have the problem and the “ESC OFF Indicator Light” come on momen- diagnosed and corrected.
Page 525: Electronic Roll Mitigation (Erm)
STARTING AND OPERATING 523 Electronic Roll Mitigation (ERM) WARNING! (Continued) This system anticipates the potential for wheel lift by that wheel lift or rollover may occur. ERM cannot monitoring the driver’s steering wheel input and the prevent all wheel lift or roll overs, especially those speed of the vehicle.
Page 526: Tire Safety Information
524 STARTING AND OPERATING to “Trailer Towing” in this section for further informa- TIRE SAFETY INFORMATION tion. When TSC is functioning, the “ESC Activation/ Tire Markings Malfunction Indicator Light” will flash, the engine power may be reduced and you may feel the brakes being applied to individual wheels to attempt to stop the trailer from swaying.
Page 527 STARTING AND OPERATING 525 • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 528 526 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 529 STARTING AND OPERATING 527 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 530: Tire Identification Number (Tin)
528 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 531 STARTING AND OPERATING 529 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 532: Tire Terminology And Definitions
530 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 533: Tire Loading And Tire Pressure
STARTING AND OPERATING 531 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
Page 534 532 STARTING AND OPERATING Tire And Loading Information Placard 3. Tire size designed for your vehicle. 4. Cold tire inflation pressures for the front, rear, and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. You will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tire size, and cold tire inflation pressures specified on the Tire and Loading...
Page 535 STARTING AND OPERATING 533 To determine the maximum loading conditions of your 4. The resulting figure equals the available amount of vehicle, locate the statement “The combined weight of cargo and luggage load capacity. For example, if occupants and cargo should never exceed XXX lbs or “XXX”...
Page 536 534 STARTING AND OPERATING • For the following example, the combined weight of NOTE: occupants and cargo should never exceed 865 lbs • If your vehicle will be towing a trailer, load from your (392 kg). trailer will be transferred to your vehicle. The follow- ing table shows examples on how to calculate total load, cargo/luggage, and towing capacities of your vehicle with varying seating configurations and num-...
Page 537 STARTING AND OPERATING 535...
Page 538: Tires - General Information
536 STARTING AND OPERATING • Ride Comfort WARNING! Safety Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and WARNING! increase your stopping distance. Use tires of the • Improperly inflated tires are dangerous and can recommended load capacity for your vehicle.
Page 539 STARTING AND OPERATING 537 Fuel Economy WARNING! (Continued) Underinflated tires will increase tire rolling resistance • Unequal tire pressures from one side of the vehicle resulting in higher fuel consumption. to the other can cause the vehicle to drift to the right or left.
Page 540: Tire Inflation Pressures
538 STARTING AND OPERATING Tire Inflation Pressures Inflation pressures specified on the placard are always “cold tire inflation pressure”. Cold tire inflation pressure The proper cold tire inflation pressure is listed on the is defined as the tire pressure after the vehicle has not driver’s side B-Pillar or rear edge of the driver’s side door.
Page 541: Tire Pressures For High Speed Operation
STARTING AND OPERATING 539 inflation pressure should be increased by 3 psi (21 kPa), WARNING! which equals 1 psi (7 kPa) for every 12°F (7°C) for this outside temperature condition. High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your Tire pressure may increase from 2 to 6 psi (13 to 40 kPa) tires could cause them to fail.
Page 542: Tire Types
540 STARTING AND OPERATING Tire Repair Tire Types If your tire becomes damaged, it may be repaired if it All Season Tires — If Equipped meets the following criteria: All Season tires provide traction for all seasons (Spring, • The tire has not been driven on when flat. Summer, Fall and Winter).
Page 543 STARTING AND OPERATING 541 Summer tires do not contain the all season designation or Snow Tires mountain/snowflake symbol on the tire sidewall. Use Some areas of the country require the use of snow tires Summer tires only in sets of four; failure to do so may during the Winter.
Page 544: Run Flat Tires - If Equipped
542 STARTING AND OPERATING While studded tires improve performance on ice, skid Spare Tires — If Equipped and traction capability on wet or dry surfaces may be NOTE: For vehicles equipped with Tire Service Kit poorer than that of non-studded tires. Some states pro- instead of a spare tire, please refer to “Tire Service Kit”...
Page 545 STARTING AND OPERATING 543 rotation for your vehicle. If your vehicle has this option, Do not install a wheel cover or attempt to mount a refer to an authorized tire dealer for the recommended conventional tire on the compact spare wheel, since the tire rotation pattern.
Page 546 544 STARTING AND OPERATING Full Size Spare — If Equipped your original equipment tire, replace (or repair) the original equipment tire and reinstall on the vehicle at the The full size spare is for temporary emergency use only. first opportunity. This tire may look like the originally equipped tire on the front or rear axle of your vehicle, but it is not.
Page 547: Tire Spinning
STARTING AND OPERATING 545 Tire Spinning Tread Wear Indicators When stuck in mud, sand, snow, or ice conditions, do not Tread wear indicators are in the original equipment tires to spin your vehicle’s wheels above 30 mph (48 km/h) or help you in determining when your tires should be replaced.
Page 548: Life Of Tire
546 STARTING AND OPERATING • Distance driven. These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth • Performance tires, tires with a speed rating of V or becomes a 1/16 of an inch (1.6 mm). When the tread is higher, and Summer tires typically have a reduced worn to the tread wear indicators, the tire should be tread life.
Page 549: Replacement Tires
STARTING AND OPERATING 547 Replacement Tires affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match The tires on your new vehicle provide a balance of many those of the original wheels. characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures.
Page 550: Tire Chains (Traction Devices)
548 STARTING AND OPERATING WARNING! (Continued) CAUTION! braking of your vehicle. This can cause unpredict- Replacing original tires with tires of a different size able handling and stress to steering and suspen- may result in false speedometer and odometer read- sion components.
Page 551 STARTING AND OPERATING 549 WARNING! CAUTION! (Continued) • Install device as tightly as possible and then re- Using tires of different size and type (M+S, Snow) tighten after driving about ½ mile (0.8 km). between front and rear axles can cause unpredictable •...
Page 552: Tire Rotation Recommendations
550 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS The suggested rotation method is the “forward cross” shown in the following diagram. This rotation pattern The tires on the front and rear of your vehicle operate at does not apply to some directional tires that must not be different loads and perform different steering, driving, reversed.
Page 553: Tire Pressure Monitor System (Tpms)
STARTING AND OPERATING 551 TIRE PRESSURE MONITOR SYSTEM (TPMS) The TPMS will warn the driver of a low tire pressure if the tire pressure falls below the low pressure warning The TPMS will warn the driver of a low tire pressure threshold for any reason, including low temperature based on the cold inflation tire placard pressure require- effects, or natural air pressure loss through the tire.
Page 554 552 STARTING AND OPERATING The system will automatically update and the “Tire have been inflated to the vehicle’s recommended cold tire Pressure Monitoring Telltale Light” will extinguish once placard pressure value. the updated tire pressures have been received. CAUTION! NOTE: The vehicle may need to be driven for up to 10 minutes above 15 mph (24 km/h) to receive this infor- •...
Page 555: Base System
STARTING AND OPERATING 553 • The TPMS is not a substitute for proper tire mainte- CAUTION! (Continued) nance, and it is the driver’s responsibility to maintain • After inspecting or adjusting the tire pressure al- correct tire pressure, using an accurate tire pressure ways reinstall the valve stem cap.
Page 556 554 STARTING AND OPERATING NOTE: It is particularly important for you to check the road tire pressures are low. Should this occur, you should tire pressure in all of your tires regularly and to maintain stop as soon as possible, check the inflation pressure of the proper pressure.
Page 557 STARTING AND OPERATING 555 • Using wheels/tires not equipped with TPMS sensors. SERVICE TPM SYSTEM The “Tire Pressure Monitoring Telltale Light” will flash Vehicles With Compact Spare on and off for 75 seconds, and remain on solid when a • The compact spare tire (if equipped) does not have a system fault is detected.
Page 558: Premium System
556 STARTING AND OPERATING • For each subsequent ignition switch cycle, a chime will Premium System sound, the “Tire Pressure Monitoring Telltale Light” The TPMS uses wireless technology with wheel rim- will flash on and off for 75 seconds and then remain on mounted electronic sensors to monitor tire pressure lev- solid.
Page 559 STARTING AND OPERATING 557 TPMS Low Pressure Warnings The system will automatically update, the graphic dis- play of the pressure value(s) will stop flashing, and the The “Tire Pressure Monitoring Telltale Light” will illumi- “Tire Pressure Monitoring Telltale Light” will extinguish nate in the instrument cluster, and an audible chime will once the updated tire pressure(s) have been received.
Page 560 558 STARTING AND OPERATING If the ignition switch is cycled, this sequence will repeat, Vehicles With Compact Spare providing the system fault still exists. If the system fault • The compact spare tire (if equipped) does not have a no longer exists, the “Tire Pressure Monitoring Telltale TPMS.
Page 561 STARTING AND OPERATING 559 “SERVICE TPM SYSTEM” message for a minimum of NOTE: The vehicle may need to be driven for up to 10 five seconds and then display dashes (- -) in place of the minutes above 15 mph (24 km/h) in order for the TPMS pressure value.
Page 562: Fuel Requirements
560 STARTING AND OPERATING FUEL REQUIREMENTS than 87 can cause engine failure and may void or not be covered by the New Vehicle Limited Warranty. 3.6L Engine Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these This engine is designed to meet all emis- symptoms, try another brand of gasoline before consid- sions regulations and provide optimum...
Page 563: Gasoline/Oxygenate Blends
STARTING AND OPERATING 561 Gasoline/Oxygenate Blends are not the responsibility of the manufacturer and may void or not be covered under New Vehicle Limited Some fuel suppliers blend unleaded gasoline with oxy- Warranty. genates such as ethanol. Modifications that allow the engine to run on com- CAUTION! pressed natural gas (CNG) or liquid propane (LP) may result in damage to the engine, emissions, and fuel...
Page 564: Mmt In Gasoline
562 STARTING AND OPERATING If a Non-FFV vehicle is inadvertently fueled with E-85 without MMT be used in your vehicle. The MMT content fuel, the engine will have some or all of these symptoms: of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether •...
Page 565: Fuel System Cautions
STARTING AND OPERATING 563 Indiscriminate use of fuel system cleaning agents should CAUTION! (Continued) be avoided. Many of these materials intended for gum some light smoke, your engine may be out of tune and varnish removal may contain active solvents or or malfunctioning and may require immediate ser- similar ingredients.
Page 566: Carbon Monoxide Warnings
564 STARTING AND OPERATING Carbon Monoxide Warnings WARNING! (Continued) • Guard against carbon monoxide with proper main- WARNING! tenance. Have the exhaust system inspected every Carbon monoxide (CO) in exhaust gases is deadly. time the vehicle is raised. Have any abnormal Follow the precautions below to prevent carbon conditions repaired promptly.
Page 567: Ethanol Fuel (E-85)
STARTING AND OPERATING 565 Fuel Requirements CAUTION! If your vehicle is E-85 compatible, it will operate on Only vehicles with the E-85 fuel filler door label or a unleaded gasoline with any octane rating, or solely E-85 yellow gas cap can operate on E-85. fuel, or any mixture of these fuels.
Page 568: Selection Of Engine Oil For Flexible Fuel Vehicles (E-85) And Gasoline Vehicles
566 STARTING AND OPERATING NOTE: FCA Material Standard MS-6395. It is recommended that engine oils that are API Certified and meet the require- • Use seasonally adjusted E-85 fuel (ASTM D5798). With ments of Material Standard MS-6395 be used. MS-6395 non-seasonally adjusted E-85 fuel, hard starting and contains additional requirements, developed during ex- rough idle following start up may be experienced even...
Page 569: Cruising Range
STARTING AND OPERATING 567 Cruising Range Maintenance Because E-85 fuel contains less energy per gallon/liter CAUTION! than gasoline, an increase in fuel consumption will be experienced. The miles per gallon (mpg)/kilometers per Do not use ethanol mixture greater than 85% in your liter and the driving range will decrease by approxi- vehicle.
Page 570 568 STARTING AND OPERATING CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap. A poorly fitting cap could let impurities into the fuel system and may cause the “Malfunction Indicator Light (MIL)”...
Page 571: Loose Fuel Filler Cap Message
STARTING AND OPERATING 569 • If the gas cap is not tightened properly, the MIL may WARNING! (Continued) come on. Be sure the gas cap is tightened every time • Never add fuel when the engine is running. This is the vehicle is refueled.
Page 572: Vehicle Loading
570 STARTING AND OPERATING • Month and year of manufacture If the problem continues, the message will appear the next time the vehicle is started. See your authorized • Gross Vehicle Weight Rating (GVWR) dealer as soon as possible. • Gross Axle Weight Rating (GAWR) front VEHICLE LOADING •...
Page 573 STARTING AND OPERATING 571 Gross Axle Weight Rating (GAWR) Rim Size The GAWR is the maximum capacity of the front and rear This is the rim size that is appropriate for the tire size axles. Distribute the load over the front and rear axles listed.
Page 574 572 STARTING AND OPERATING Overloading Loading The load carrying components (axle, springs, tires, To load your vehicle properly, first figure out its empty wheels, etc.) of your vehicle will provide satisfactory weight, axle-by-axle and side-by-side. Store heavier items service as long as you do not exceed the GVWR and the down low and be sure you distribute their weight as front and rear GAWR.
Page 575: Trailer Towing
STARTING AND OPERATING 573 TRAILER TOWING exceed the GVWR. Refer to “Vehicle Loading/Vehicle Certification Label” in “Starting And Operating” for In this section you will find safety tips and information further information. on limits to the type of towing you can reasonably do with your vehicle.
Page 576 574 STARTING AND OPERATING GAWR. Refer to “Vehicle Loading/Vehicle Certification La- Trailer Sway Control bel” in “Starting And Operating” for further information. The trailer sway control can be a mechanical telescoping link that can be installed between the hitch receiver and WARNING! the trailer tongue that typically provides adjustable fric- tion associated with the telescoping motion to dampen...
Page 577 STARTING AND OPERATING 575 Weight-Distributing Hitch WARNING! A weight-distributing system works by applying lever- • An improperly adjusted Weight Distributing Hitch age through spring (load) bars. They are typically used system may reduce handling, stability, braking for heavier loads to distribute trailer tongue weight to the performance, and could result in a collision.
Page 578 576 STARTING AND OPERATING Trailer Hitch Classification tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can Trailer Hitch Classification Definitions Class Max.
Page 579 STARTING AND OPERATING 577 Trailer Towing Weights (Maximum Trailer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. GCWR (Gross Engine/ Max. GTW (Gross Max. Tongue Combined Weight Frontal Area Transmission Trailer Weight) Weight Rating) 3.6L/Automatic...
Page 580 578 STARTING AND OPERATING NOTE: The trailer tongue weight must be considered as part of the combined weight of occupants and cargo, and should never exceed the weight referenced on the Tire and Loading Information placard. Refer to “Tire Safety Information”...
Page 581 STARTING AND OPERATING 579 NOTE: Remember that everything put into or on the CAUTION! trailer adds to the load on your vehicle. Also, additional • Do not tow a trailer at all during the first 500 miles factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle.
Page 582 580 STARTING AND OPERATING WARNING! WARNING! (Continued) the hook retainers of the vehicle hitch. Cross the Improper towing can lead to a collision. Follow these chains under the trailer tongue and allow enough guidelines to make your trailer towing as safe as slack for turning corners.
Page 583 STARTING AND OPERATING 581 • Check for signs of tire wear or visible tire damage WARNING! (Continued) before towing a trailer. Refer to “Tires – General Information” in “Starting And Operating” for the 3. GAWR proper inspection procedure. 4. Tongue weight rating for the trailer hitch utilized. •...
Page 584 582 STARTING AND OPERATING actuated brakes. When towing a trailer equipped with CAUTION! a hydraulic surge actuated brake system, an electronic brake controller is not required. If the trailer weighs more than 1,000 lbs (453 kg) loaded, it should have its own brakes and they •...
Page 585 STARTING AND OPERATING 583 The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector. Refer to the following illustrations. Seven-Pin Connector 1 — Battery 5 — Ground 2 — Backup Lamps 6 —...
Page 586: Towing Tips
584 STARTING AND OPERATING Towing Tips or frequent trailer towing”. Refer to the “Maintenance Schedule” for the proper maintenance intervals. Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away from Electronic Speed Control —...
Page 587: Recreational Towing
STARTING AND OPERATING 585 Highway Driving Air Conditioning Reduce speed. Turn off temporarily. RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF the Ground All Models Flat Tow NONE NOT ALLOWED Dolly Tow Front Rear NOT ALLOWED On Trailer...
Page 588: Recreational Towing - All Models
586 STARTING AND OPERATING Recreational Towing — All Models CAUTION! Recreational towing is allowed ONLY if the front wheels • DO NOT flat tow this vehicle. Damage to the are OFF the ground. This may be accomplished using a drivetrain will result. If this vehicle requires tow- tow dolly or vehicle trailer.
Page 589 WHAT TO DO IN EMERGENCIES CONTENTS HAZARD WARNING FLASHERS ...589 JACKING AND TIRE CHANGING — IF EQUIPPED ......603 IF YOUR ENGINE OVERHEATS .
Page 590 588 WHAT TO DO IN EMERGENCIES ▫ Road Tire Installation ....621 FREEING A STUCK VEHICLE ... . .627 JUMP-STARTING .
Page 591: Hazard Warning Flashers
WHAT TO DO IN EMERGENCIES 589 HAZARD WARNING FLASHERS IF YOUR ENGINE OVERHEATS The Hazard Warning flasher switch is located in the In any of the following situations, you can reduce the lower center area of the instrument panel. potential for overheating by taking the appropriate action. •...
Page 592: Tire Service Kit - If Equipped
590 WHAT TO DO IN EMERGENCIES TIRE SERVICE KIT — IF EQUIPPED CAUTION! Small punctures up to 1/4 inch (6 mm) in the tire tread Driving with a hot cooling system could damage can be sealed with Tire Service Kit. Foreign objects (e.g., your vehicle.
Page 593: Tire Service Kit Storage
WHAT TO DO IN EMERGENCIES 591 Tire Service Kit Storage 2. Turn the two rear left side trim panel latches to release the trim panel. The Tire Service Kit is stowed behind the rear left side trim panel in the rear cargo area. Tire Service Kit Tire Service Kit Location 1.
Page 594: Tire Service Kit Components And Operation
592 WHAT TO DO IN EMERGENCIES Tire Service Kit Components And Operation Using The Mode Select Knob And Hoses Your Tire Service Kit is equipped with the following symbols to indicate the air or sealant mode. Selecting Air Mode Push in the Mode Select Knob (5) and turn to this position for air pump operation only.
Page 595: Tire Service Kit Usage Precautions
WHAT TO DO IN EMERGENCIES 593 Using The Deflation Button Push the Deflation Button (2) to reduce the air pressure in the tire if it becomes over-inflated. Tire Service Kit Usage Precautions • Replace the Tire Service Kit Sealant Bottle (1) and Sealant Hose (6) prior to the expiration date (printed at the lower right hand corner on the bottle label) to assure optimum operation of the system.
Page 596 594 WHAT TO DO IN EMERGENCIES from the vehicle or tire and wheel components. Once WARNING! the sealant dries, it can easily be peeled off and • Do not attempt to seal a tire on the side of the properly discarded. vehicle closest to traffic.
Page 597: Sealing A Tire With Tire Service Kit
WHAT TO DO IN EMERGENCIES 595 WARNING! (Continued) WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Tire Service Kit Sealant solution contains latex. In heat source. case of an allergic reaction or rash, consult a phy- •...
Page 598 596 WHAT TO DO IN EMERGENCIES on the ground. This will provide the best positioning 4. Remove the cap from the valve stem and then screw of the kit when injecting the sealant into the deflated the fitting at the end of the Sealant Hose (6) onto the tire and running the air pump.
Page 599 WHAT TO DO IN EMERGENCIES 597 • After pushing the Power Button (4), the sealant (white 2. Connect the Power Plug (8) to a different 12 Volt fluid) will flow from the Sealant Bottle (1) through the power outlet in your vehicle or another vehicle, if Sealant Hose (6) and into the tire.
Page 600 598 WHAT TO DO IN EMERGENCIES quickly from approximately 70 psi (4.8 Bar) to the If the tire inflates to the recommended pressure or is at actual tire pressure when the Sealant Bottle (1) is least 26 psi (1.8 Bar) pressure within 15 minutes: empty.
Page 601 WHAT TO DO IN EMERGENCIES 599 CAUTION! (Continued) WARNING! • Failure to reinstall the cap on the fitting at the end Tire Service Kit is not a permanent flat tire repair. of the Sealant Hose (6) can result in sealant con- Have the tire inspected and repaired or replaced after tacting your skin, clothing, and the vehicle’s inte- using Tire Service Kit.
Page 602 600 WHAT TO DO IN EMERGENCIES 3. Uncoil the Air Pump Hose (7) (black in color) and 2. Disconnect the Tire Service Kit from the valve stem, screw the fitting at the end of hose (7) onto the valve reinstall the cap on the valve stem and unplug from 12 stem.
Page 603: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 601 (F) Sealant Bottle And Hose Replacement: 6. Verify that the cap is installed on the fitting at the end of the Sealant Hose (6) and return the hose to its 1. Uncoil the Sealant Hose (6) (clear in color). storage area (located on the bottom of the air pump).
Page 604: Torque Specifications
602 WHAT TO DO IN EMERGENCIES Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 100 Ft-Lbs (135 N·m) M12 x 1.5 19 mm **Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
Page 605: Jacking And Tire Changing - If Equipped
WHAT TO DO IN EMERGENCIES 603 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. JACKING AND TIRE CHANGING —...
Page 606: Jack Location
604 WHAT TO DO IN EMERGENCIES WARNING! (Continued) under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift. • Never start or run the engine while the vehicle is on a jack.
Page 607: To Access Spare Tire Winch Drive Nut
WHAT TO DO IN EMERGENCIES 605 drive” nut is located on the floor, under a plastic cap at To Access Spare Tire Winch Drive Nut the front of the floor console or under front super console To access the spare tire winch drive nut and lower the forward bin liner.
Page 608 606 WHAT TO DO IN EMERGENCIES 2. Open the front drawer to expose the storage compart- ment. 3. Remove the liner from the console’s storage compart- ment to access the spare tire winch drive nut. Super Console 1 — Lower Drawer 2 —...
Page 609: Spare Tire Tools
WHAT TO DO IN EMERGENCIES 607 Premium/Base/Cargo Center Console Spare Tire Tools Pull the Winch Cover assembly plug (if equipped) to The tool pouch contains three pieces and can be as- access the winch drive nut. sembled into a spare tire hook; to remove the compact spare tire/cover assembly from under the vehicle, or a Winch T-handle;...
Page 610 608 WHAT TO DO IN EMERGENCIES Assembled T-handle Assembling The Spare Tire Hook 1 — Spare Tire Hook/T-handle 1 — Spare Tire Hook/T-handle 2 — Extension 1 2 — Extension 1 3 — Extension 2 3 — Extension 2...
Page 611: Spare Tire Removal Instructions
WHAT TO DO IN EMERGENCIES 609 Spare Tire Removal Instructions 2. Rotate the nut to the left until the winch mechanism stops turning freely. This will allow enough slack in The spare tire is located under the vehicle beneath the the cable to allow you to pull the spare tire out from center console area.
Page 612 610 WHAT TO DO IN EMERGENCIES 4. Stand the tire/cover assembly upright and remove the wheel spacer by squeezing the winch retaining tabs together. Push the retainer through the spare tire to release it from the wheel. Pulling Spare Tire NOTE: If either front tire is flat it may be necessary to jack up the vehicle to remove the compact spare tire/ cover assembly from under the vehicle.
Page 613: Preparations For Jacking
WHAT TO DO IN EMERGENCIES 611 Preparations For Jacking 6. Block both the front and rear of the wheel diagonally opposite of the jacking position. For example, if chang- 1. Park the vehicle on a firm, level surface. Avoid ice or ing the right front tire, block the left rear wheel.
Page 614 612 WHAT TO DO IN EMERGENCIES WARNING! (Continued) WARNING! (Continued) • Turn on the Hazard Warning flasher. • If working on or near a roadway, be extremely • Block the wheel diagonally opposite the wheel to careful of motor traffic. •...
Page 615 WHAT TO DO IN EMERGENCIES 613 CAUTION! Do not attempt to raise the vehicle by jacking on locations other than those indicated in the Jacking Instructions for this vehicle. NOTE: Refer to the “Compact Spare Tire” section of “Tires – General Information” for information about the compact spare tire, its use, and operation.
Page 616 614 WHAT TO DO IN EMERGENCIES Rear jack locations are between a pair of down-facing tabs on the sill flange of the vehicle side body. Jack Location CAUTION! Rear Jacking Locations Do not attempt to raise the vehicle by jacking on locations other than those indicated.
Page 617 WHAT TO DO IN EMERGENCIES 615 Front jack location is on the sill flange of the vehicle body and is located 6 inches (150 mm) from door edge. Rear Jack Engaged Front Jack Locations...
Page 618 616 WHAT TO DO IN EMERGENCIES WARNING! Being under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. You could be crushed. Never get any part of your body under a vehicle that is on a jack. If you need to get under a raised vehicle, take it to a service center where it can be raised on a lift.
Page 619 WHAT TO DO IN EMERGENCIES 617 WARNING! CAUTION! (Continued) damaged if the compact spare tire is mounted incor- Raising the vehicle higher than necessary can make rectly. the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire.
Page 620 618 WHAT TO DO IN EMERGENCIES 9. Lower the jack to its fully-closed position. WARNING! WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle A loose tire or jack thrown forward in a collision or has been lowered.
Page 621: Securing The Compact Spare Tire
WHAT TO DO IN EMERGENCIES 619 form a “T” and fit the winch T-handle over the drive WARNING! nut. Rotate the nut to the right until the winch mechanism clicks at least three times. A loose compact spare tire/cover assembly, thrown forward in a collision or hard stop could endanger NOTE: Refer to the “Spare Tire Tools”...
Page 622 620 WHAT TO DO IN EMERGENCIES 3. Turn the compact spare tire so that the valve stem is WARNING! down, and place the tire into the compact spare tire/cover assembly. Slide the wheel spacer through Verify that both retainer tabs of the wheel spacer the center of the wheel and compact spare tire/cover have been properly extended through the center of assembly, so that the two retainer tabs snap out and...
Page 623: Road Tire Installation
WHAT TO DO IN EMERGENCIES 621 CAUTION! The winch mechanism is designed specifically to stow a compact spare tire only. Do not attempt to use the winch to stow the full size deflated tire, or any other full-size tire, as the tire may not be held securely.
Page 624 622 WHAT TO DO IN EMERGENCIES snapping the cover over the two lug nuts. Do not use torque refer to Torque Specifications in this section. If a hammer or excessive force to install the cover. in doubt about the correct tightness, have them checked with a torque wrench by your authorized 4.
Page 625: Jump-Starting
WHAT TO DO IN EMERGENCIES 623 5. After 25 miles (40 km) check the lug nut torque with a WARNING! torque wrench to ensure that all lug nuts are properly seated against the wheel. To avoid the risk of forcing the vehicle off the jack, do not tighten the wheel nuts fully until the vehicle JUMP-STARTING has been lowered.
Page 626: Preparations For Jump-Start
624 WHAT TO DO IN EMERGENCIES Preparations For Jump-Start CAUTION! (Continued) The battery in your vehicle is located on the left side of than 12 Volts or damage to the battery, starter motor, the engine compartment. alternator or electrical system may occur. WARNING! Do not attempt jump-starting if the battery is frozen.
Page 627: Jump-Starting Procedure
WHAT TO DO IN EMERGENCIES 625 3. If using another vehicle to jump-start the battery, park WARNING! the vehicle within the jumper cables reach, set the • Take care to avoid the radiator cooling fan when- parking brake and make sure the ignition is OFF. ever the hood is raised.
Page 628 626 WHAT TO DO IN EMERGENCIES the discharged vehicle’s engine) away from the battery CAUTION! and the fuel injection system. Failure to follow these procedures could result in WARNING! damage to the charging system of the booster vehicle or the discharged vehicle. Do not connect the jumper cable to the negative (-) post of the discharged battery.
Page 629: Freeing A Stuck Vehicle
WHAT TO DO IN EMERGENCIES 627 6. Once the engine is started, remove the jumper cables CAUTION! in the reverse sequence: Accessories plugged into the vehicle power outlets Disconnecting The Jumper Cables draw power from the vehicle’s battery, even when not 1.
Page 630 628 WHAT TO DO IN EMERGENCIES maintain the rocking motion, without spinning the CAUTION! wheels or racing the engine. • When “rocking” a stuck vehicle by shifting be- CAUTION! tween DRIVE and REVERSE, do not spin the wheels faster than 15 mph (24 km/h), or drivetrain Racing the engine or spinning the wheels may lead to damage may result.
Page 631: Gear Selector Override
WHAT TO DO IN EMERGENCIES 629 WARNING! (Continued) explode and injure someone. Do not spin your vehi- cle’s wheels faster than 30 mph (48 km/h) or for longer than 30 seconds continuously without stop- ping when you are stuck and do not let anyone near a spinning wheel, no matter what the speed.
Page 632: Towing A Disabled Vehicle
630 WHAT TO DO IN EMERGENCIES 7. The vehicle may then be started in NEUTRAL. 8. Reinstall the gear selector override access cover. TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF the Ground ALL MODELS...
Page 633 WHAT TO DO IN EMERGENCIES 631 structural members of the vehicle, not to bumpers or CAUTION! (Continued) associated brackets. State and local laws regarding vehicles • When securing the vehicle to a flatbed truck, do not under tow must be observed. attach to front or rear suspension components.
Page 634 632 WHAT TO DO IN EMERGENCIES If the transmission is not operable, or the vehicle must be towed faster than 25 mph (40 km/h) or farther than 15 miles (24 km), it must be towed with the front wheels OFF the ground (using a flatbed truck, or wheel lift equipment with the front wheels raised).
Page 635 MAINTAINING YOUR VEHICLE CONTENTS ▫ Engine Oil ......641 ENGINE COMPARTMENT — 3.6L ..635 ▫...
Page 636 634 MAINTAINING YOUR VEHICLE ▫ Automatic Transmission ....660 ▫ Front Park/Turn Signal Lamps ... .681 ▫...
Page 637: Engine Compartment - 3.6L
MAINTAINING YOUR VEHICLE 635 ENGINE COMPARTMENT — 3.6L 1 — Air Filter 6 — Engine Coolant Reservoir 2 — Power Steering Fluid Reservoir 7 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 8 — Engine Oil Fill 4 — Battery 9 —...
Page 638: Onboard Diagnostic System - Obd Ii
636 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated Onboard • Prolonged driving with the MIL on could cause Diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 639: Loose Fuel Filler Cap Message
MAINTAINING YOUR VEHICLE 637 access this information to assist with the diagnosis and For further information, refer to “Cybersecurity” in “Un- service of your vehicle and emissions system. derstanding Your Instrument Panel” in your Owner’s Manual on the DVD. WARNING! Loose Fuel Filler Cap Message •...
Page 640: Emissions Inspection And Maintenance Programs
638 MAINTAINING YOUR VEHICLE cap. If the problem is detected twice in a row, the system serviced, recently had a dead battery or a battery replace- will turn on the MIL. Resolving the problem will turn the ment. If the OBD II system should be determined not MIL light off.
Page 641: Replacement Parts
MAINTAINING YOUR VEHICLE 639 3. Approximately 15 seconds later, one of two things will system to update. A recheck with the above test routine happen: may then indicate that the system is now ready. • The MIL will flash for about 10 seconds and then Regardless of whether your vehicle’s OBD II system is return to being fully illuminated until you turn OFF ready or not, if the MIL is illuminated during normal...
Page 642: Dealer Service
640 MAINTAINING YOUR VEHICLE DEALER SERVICE MAINTENANCE PROCEDURES Your authorized dealer has the qualified service person- The pages that follow contain the required maintenance nel, special tools, and equipment to perform all service services determined by the engineers who designed your operations in an expert manner.
Page 643: Engine Oil
MAINTAINING YOUR VEHICLE 641 regular intervals, such as every fuel stop. The best time to CAUTION! (Continued) check the engine oil level is about five minutes after a • Your vehicle has been built with improved fluids fully warmed engine is shut OFF. that protect the performance and durability of your Checking the oil while the vehicle is on level ground will vehicle and also allow extended maintenance inter-...
Page 644 642 MAINTAINING YOUR VEHICLE Change Engine Oil American Petroleum Institute (API) Engine Oil Identification Symbol The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to the “Maintenance Schedule” for further informa- This symbol means that the oil has tion.
Page 645 MAINTAINING YOUR VEHICLE 643 Engine Oil Viscosity (SAE Grade) — 3.6L Engine Synthetic Engine Oils MOPAR SAE 5W-20 engine oil approved to FCA Material You may use synthetic engine oils provided the recom- Standard MS-6395 such as Pennzoil, Shell Helix or mended oil quality requirements are met, and the recom- equivalent is recommended for all operating tempera- mended maintenance intervals for oil and filter changes...
Page 646: Engine Oil Filter
644 MAINTAINING YOUR VEHICLE indiscriminately discarded, can present a problem to the Engine Air Cleaner Filter environment. Contact your authorized dealer, service Refer to the “Maintenance Schedule” in the “Mainte- station or governmental agency for advice on how and nance Schedules” section for the proper maintenance where used oil and oil filters can be safely discarded in intervals.
Page 647: Exhaust System
MAINTAINING YOUR VEHICLE 645 Engine Air Cleaner Filter Selection exhaust system inspected each time the vehicle is raised for lubrication or oil change. Replace as required. The quality of replacement engine air cleaner filters varies considerably. Only high quality filters should be WARNING! used to assure most efficient service.
Page 648 646 MAINTAINING YOUR VEHICLE Under normal operating conditions, the catalytic con- CAUTION! verter will not require maintenance. However, it is im- • The catalytic converter requires the use of un- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst leaded fuel only.
Page 649: Maintenance-Free Battery
MAINTAINING YOUR VEHICLE 647 To minimize the possibility of catalytic converter dam- WARNING! age: • Battery fluid is a corrosive acid solution and can • Do not shut off the engine or interrupt the ignition, burn or even blind you. Do not allow battery fluid when the transmission is in gear and the vehicle is in to contact your eyes, skin, or clothing.
Page 650: Air Conditioner Maintenance
648 MAINTAINING YOUR VEHICLE test. Drive belt tension should also be checked at this CAUTION! time. • It is essential when replacing the cables on the WARNING! battery that the positive cable is attached to the positive post and the negative cable is attached to •...
Page 651 MAINTAINING YOUR VEHICLE 649 A/C Air Filter CAUTION! Refer to the “Maintenance Schedule” for the proper Do not use chemical flushes in your air conditioning maintenance intervals. system as the chemicals can damage your air condi- tioning components. Such damage is not covered by WARNING! the New Vehicle Limited Warranty.
Page 652 650 MAINTAINING YOUR VEHICLE 2. Push in on the sides of the glove compartment and 5. Remove the A/C air filter by pulling it straight out of lower the door. the housing. 3. Pivot the glove compartment downward. 6. Install the A/C air filter with the arrow on the filter pointing toward the floor.
Page 653: Body Lubrication
MAINTAINING YOUR VEHICLE 651 Body Lubrication Windshield Wiper Blades Locks and all body pivot points, including such items as Clean the rubber edges of the wiper blades and the seat tracks, door hinge pivot points and rollers, liftgate, windshield periodically with a sponge or soft cloth and a tailgate, decklid, sliding doors and hood hinges, should mild nonabrasive cleaner.
Page 654: Cooling System
652 MAINTAINING YOUR VEHICLE Adding Washer Fluid freezing the fluid on the cold windshield. MOPAR All Weather Windshield Washer Solution or equivalent, used The fluid reservoir for the windshield washers and the with water as directed on the container, aids cleaning rear window washer is shared.
Page 655 MAINTAINING YOUR VEHICLE 653 With the engine at normal operating temperature (but WARNING! (Continued) not running), check the cooling system pressure cap for time to cool. Never try to open a cooling system proper vacuum sealing by draining a small amount of pressure cap when the radiator is hot.
Page 656 654 MAINTAINING YOUR VEHICLE Refer to the “Maintenance Schedule” for the proper CAUTION! (Continued) maintenance intervals. coolant (antifreeze) is introduced into the cooling Selection Of Coolant system in an emergency, the cooling system will need to be drained, flushed, and refilled with fresh Refer to “Fluids, Lubricants, And Genuine Parts”...
Page 657 MAINTAINING YOUR VEHICLE 655 • Mix a minimum solution of 50% OAT engine coolant Adding Coolant that meets the requirements of FCA Material Standard Your vehicle has been built with an improved engine MS.90032 and distilled water. Use higher concentra- coolant (OAT coolant conforming to MS.90032) that al- tions (not to exceed 70%) if temperatures below −34°F lows extended maintenance intervals.
Page 658 656 MAINTAINING YOUR VEHICLE • Some vehicles require special tools to add coolant The cap should be inspected and cleaned if there is any properly. Failure to fill these systems properly could accumulation of foreign material on the sealing surfaces. lead to severe internal engine damage.
Page 659 MAINTAINING YOUR VEHICLE 657 Disposal Of Used Engine Coolant unless checking for engine coolant (antifreeze) freeze point or replacing coolant. Advise your service attendant Used ethylene glycol-based engine coolant (antifreeze) is of this. As long as the engine operating temperature is a regulated substance requiring proper disposal.
Page 660: Brake System
658 MAINTAINING YOUR VEHICLE • Make sure that the coolant expansion bottle overflow If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be hoses are not kinked or obstructed. safely driven. The vapor will soon dissipate. •...
Page 661 MAINTAINING YOUR VEHICLE 659 Overfilling of fluid is not recommended because it may WARNING! cause leaking in the system. Riding the brakes can lead to brake failure and Add enough fluid to bring the level up to the require- possibly a collision. Driving with your foot resting or ments described on the brake fluid reservoir.
Page 662: Automatic Transmission
660 MAINTAINING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) the brake fluid to catch fire. Brake fluid can also can severely damage your brake system and/or damage painted and vinyl surfaces, care should be impair its performance. The proper type of brake fluid for your vehicle is also identified on the taken to avoid its contact with these surfaces.
Page 663 MAINTAINING YOUR VEHICLE 661 in any transmission; only the approved lubricant should Automatic Transmission Fluid (ATF) is an engineered be used. product and its performance may be impaired by supple- mental additives. Therefore, do not add any fluid addi- CAUTION! tives to the transmission.
Page 664: Appearance Care And Protection From Corrosion
662 MAINTAINING YOUR VEHICLE provided. Your authorized dealer can check your trans- In addition, change the fluid and filter if the fluid mission fluid level using a special service dipstick. If you becomes contaminated (with water, etc.), or if the trans- notice fluid leakage or transmission malfunction, visit mission is disassembled for any reason.
Page 665 MAINTAINING YOUR VEHICLE 663 The following maintenance recommendations will enable Washing you to obtain maximum benefit from the corrosion • Wash your vehicle regularly. Always wash your ve- resistance built into your vehicle. hicle in the shade using MOPAR Car Wash, or a mild car wash soap, and rinse the panels completely with What Causes Corrosion? clear water.
Page 666 664 MAINTAINING YOUR VEHICLE • If you detect any stone chips or scratches in the paint, CAUTION! touch them up immediately. The cost of such repairs is • Do not use abrasive or strong cleaning materials considered the responsibility of the owner. such as steel wool or scouring powder that will •...
Page 667 MAINTAINING YOUR VEHICLE 665 Wheel And Wheel Trim Care CAUTION! (Continued) All wheels and wheel trim, especially aluminum and products may damage the wheel’s protective finish. chrome plated wheels, should be cleaned regularly with Avoid automatic car washes that use acidic solutions a mild soap and water to prevent corrosion.
Page 668 666 MAINTAINING YOUR VEHICLE • For grease stains, apply MOPAR Multi-Purpose and MOPAR Total Clean. Care should be taken to avoid Cleaner to a clean, damp cloth and remove stain. Use soaking your leather upholstery with any liquid. Please a fresh, damp towel to remove soap residue. do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia-based cleaners to clean your leather •...
Page 669 MAINTAINING YOUR VEHICLE 667 To minimize the possibility of scratching the lenses and CAUTION! reducing light output, avoid wiping with a dry cloth. To remove road dirt, wash with a mild soap solution fol- Damage caused by these type of products may not be lowed by rinsing.
Page 670: Cleaning The Instrument Panel Cupholders
668 MAINTAINING YOUR VEHICLE Cleaning Plastic Instrument Cluster Lenses Replace the belts if they appear frayed or worn or if the buckles do not work properly. The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care WARNING! must be taken to avoid scratching the plastic.
Page 671: Fuses
MAINTAINING YOUR VEHICLE 669 Cleaning FUSES The liner is top shelf dishwasher safe, or you may follow WARNING! the cleaning procedure below. • When replacing a blown fuse, always use an ap- Soak the liner in a mixture of medium hot tap water and propriate replacement fuse with the same amp one teaspoon of mild liquid dish soap.
Page 672: Totally Integrated Power Module (Fuses)
670 MAINTAINING YOUR VEHICLE WARNING! (Continued) • If a general protection fuse for safety systems (air bag system, braking system), power unit systems (engine system, gearbox system) or steering system blows, contact an authorized dealer. Totally Integrated Power Module (Fuses) The Totally Integrated Power Module is located in the engine compartment near the battery.
Page 673 MAINTAINING YOUR VEHICLE 671 The numbers inside the TIPM cover correspond to the CAUTION! following table. • When installing the Totally Integrated Power Mod- ule cover, it is important to ensure the cover is properly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure.
Page 674 672 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 30 Amp Pink – Rear Door Module 25 Amp Clear – Driver Door Node 25 Amp Clear – Passenger Door Node 40 Amp Green – Antilock Brakes Pump/Stability Control System 30 Amp Pink –...
Page 675 MAINTAINING YOUR VEHICLE 673 Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green – Front Blower 40 Amp Green – Starter Solenoid 20 Amp Blue – Powertrain Control Module Trans Range 60 Amp Yellow – Radiator Fan 30 Amp Pink – Front Wiper LO/HI 20 Amp Blue –...
Page 676 674 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 20 Amp Yellow Power Outlet #2 (BATT/ACC SELECT) – Center Seat or with Console Rear – 20 Amp Yellow Front Heated Seat – If Equipped – 20 Amp Yellow Rear Heated Seat – If Equipped –...
Page 677 MAINTAINING YOUR VEHICLE 675 Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Airbag Module/Occupant Classification Module – 15 Amp Blue Left Tail/License/Park Lamp, Running Lamps – 15 Amp Blue Right Tail/Park/Run Lamp – 25 Amp Clear Powertrain – 15 Amp Blue Instrument Cluster Interior Light, Switch Bank, Steering Column Module, Switch Steering Wheel...
Page 678 676 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Occupant Classification Module – 15 Amp Blue Rear Wiper Module, Power Folding Mirror – 20 Amp Yellow Back-Up Lamps – 10 Amp Red Airbag Module, THATCHUM – If Equipped –...
Page 679: Vehicle Storage
MAINTAINING YOUR VEHICLE 677 • Or, disconnect the negative cable from the battery. The power windows are fused by a 25 Amp circuit breaker located in the Totally Integrated Power Module. • Anytime you store your vehicle, or keep it out of service for two weeks or more, run the air conditioning VEHICLE STORAGE system at idle for about five minutes in the fresh air...
Page 680: Replacement Bulbs
678 MAINTAINING YOUR VEHICLE REPLACEMENT BULBS Interior Bulbs Bulb Number Center & Rear Dome Lamp Center & Rear Reading Lamps Front Door Courtesy Lamp Front Header Reading Lamps – If Equipped Instrument Cluster Lamps PC74 Liftgate Lamp(s) Overhead Console Reading Lamps PC579 Removable Console Lamp –...
Page 681 MAINTAINING YOUR VEHICLE 679 Exterior Bulbs Bulb Number Headlamp – (Low and High Beam Halogen) H11LL Headlamp (HID – If Equipped) Low Beam Fog Lamp – If Equipped H11LL Front Side Marker Front Park/Turn Signal PY27/7W or 3757A Rear Turn Signal Lamp 3757A Rear Tail, Stop, and Side Marker Lamp LED (Serviced at Authorized Dealer)
Page 682: Bulb Replacement
680 MAINTAINING YOUR VEHICLE BULB REPLACEMENT WARNING! NOTE: Lens fogging can occur under certain atmo- A transient high voltage occurs at the bulb sockets of spheric conditions. This will usually clear as atmospheric High Intensity Discharge (HID) headlamps when the conditions change to allow the condensation to change headlamp switch is turned ON.
Page 683: Front Park/Turn Signal Lamps
MAINTAINING YOUR VEHICLE 681 3. Twist the headlamp bulb and pull the bulb from the 3. Push the new bulb into the socket and reinstall the headlamp housing. socket by twisting until locked into the headlamp housing. 4. Install the new headlamp bulb and twist until locked into the headlamp housing.
Page 684: Front Fog Lamp
682 MAINTAINING YOUR VEHICLE Front Fog Lamp Rear Turn Signal And Backup Lamp NOTE: Access to the fog lamp bulb is from the rear of the 1. Raise the liftgate. fascia. On the left rear side of the fascia, remove the push 2.
Page 685: Center High-Mounted Stop Lamp (Chmsl)
MAINTAINING YOUR VEHICLE 683 3. Twist the socket and remove it from the lamp assem- bly. 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the lamp assembly. Center High-Mounted Stop Lamp (CHMSL) The CHMSL uses LED lamps that are not serviceable separately.
Page 686: Fluid Capacities
684 MAINTAINING YOUR VEHICLE 2. Twist and remove the socket from the lamp assembly 3. Push the bulb into the socket, twist the socket into the and pull the bulb out to remove. lamp assembly and reinstall the lamp assembly into place ensuring the locking tab is secure.
Page 687: Fluids, Lubricants, And Genuine Parts
MAINTAINING YOUR VEHICLE 685 FLUIDS, LUBRICANTS, AND GENUINE PARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Technology) meeting the requirements of FCA Material Standard MS.90032. Engine Oil We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the require- ments of FCA Material Standard MS-6395 such as MOPAR, Pennzoil, and Shell Helix.
Page 688 686 MAINTAINING YOUR VEHICLE CAUTION! CAUTION! (Continued) • Do not use water alone or alcohol-based engine • Mixing of engine coolant (antifreeze) other than coolant (antifreeze) products. Do not use additional specified Organic Additive Technology (OAT) en- rust inhibitors or antirust products, as they may not gine coolant (antifreeze), may result in engine be compatible with the radiator engine coolant and damage and may decrease corrosion protection.
Page 689: Chassis
MAINTAINING YOUR VEHICLE 687 Chassis Component Fluid, Lubricant, or Genuine Part Automatic Transmission Use Only ATF+4 Automatic Transmission Fluid. Failure to use ATF+4 fluid may affect the function or perfor- mance of your transmission. We recommend MOPAR ATF+4 Fluid. Brake Master Cylinder We recommend you use MOPAR DOT 3.
Page 691 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart ....692 MAINTENANCE SCHEDULE ....690...
Page 692 690 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE than your authorized dealer, the message can be reset by referring to the steps described under “Electronic Vehicle Your vehicle is equipped with an automatic oil change Information Center (EVIC)” in “Understanding Your indicator system. The oil change indicator system will Instrument Panel”...
Page 693 MAINTENANCE SCHEDULES 691 • Check the fluid levels of the coolant reservoir, brake Once A Month Or Before A Long Trip: master cylinder, and power steering and fill as needed. • Check engine oil level. • Check function of all interior and exterior lights. •...
Page 694 692 MAINTENANCE SCHEDULES Maintenance Chart Refer to the Maintenance Schedules on the following pages for the required maintenance intervals. Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary.
Page 695 MAINTENANCE SCHEDULES 693 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace engine air filter. Replace cabin/air conditioning filter. Replace spark plugs (3.6L en- gine). ** Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km) whichever comes first.
Page 696 694 MAINTENANCE SCHEDULES Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change automatic transmission fluid and filter if using your ve- hicle for any of the following: po- lice, taxi, fleet, or frequent trailer towing. Change automatic transmission fluid and filter.
Page 697 MAINTENANCE SCHEDULES 695 WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 699 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or Speech SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ..... . .699 Impaired (TDD/TTY).
Page 700 698 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .706 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ....705 ▫...
Page 701: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 699 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 702: Fca Us Llc Customer Center
700 IF YOU NEED CONSUMER ASSISTANCE • Authorized dealer name facilities, factory-trained technicians, special tools, and the latest information to ensure the vehicle is fixed • Vehicle Identification Number (VIN) correctly and in a timely manner. • Vehicle delivery date and mileage This is why you should always talk to an authorized FCA US LLC Customer Center dealer service manager first.
Page 703: In Mexico Contact
1-800-380-CHRY. Puerto Rico And U.S. Virgin Islands Canadian residents with hearing difficulties that require Customer Service Chrysler International Services LLC assistance can use the special needs relay service offered P.O. Box 191857 by Bell Canada. For TTY teletypewriter users, dial 711...
Page 704 702 IF YOU NEED CONSUMER ASSISTANCE Warranty expires. The manufacturer stands behind only We appreciate that you have made a major investment the manufacturer’s service contracts. If you purchased a when you purchased the vehicle. An authorized dealer manufacturer’s service contract, you will receive Plan has also made a major investment in facilities, tools, and Provisions and an Owner Identification Card in the mail training to assure that you are absolutely delighted with...
Page 705: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 703 WARRANTY INFORMATION If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in See the Warranty Information Booklet, located on the a group of vehicles, it may order a recall and remedy DVD, for the terms and provisions of FCA US LLC campaign.
Page 706: Publication Order Forms
704 IF YOU NEED CONSUMER ASSISTANCE defect to the Canadian government should contact Trans- complete working knowledge of the vehicle, system, port Canada, Motor Vehicle Defect Investigations and and/or components is written in straightforward lan- Recalls at 1-800-333-0510 or go to http://www.tc.gc.ca/ guage with illustrations, diagrams, and charts.
Page 707 IF YOU NEED CONSUMER ASSISTANCE 705 are starting, operating, emergency and maintenance pro- DEPARTMENT OF TRANSPORTATION UNIFORM cedures as well as specifications, capabilities and safety TIRE QUALITY GRADES tips. The following tire grading categories were established by the National Highway Traffic Safety Administration. The Call toll free at: specific grade rating assigned by the tire’s manufacturer •...
Page 708 706 IF YOU NEED CONSUMER ASSISTANCE significantly from the norm due to variations in driving Temperature Grades habits, service practices, and differences in road charac- The temperature grades are A (the highest), B, and C, teristics and climate. representing the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under Traction Grades controlled conditions on a specified indoor laboratory...
Page 709 IF YOU NEED CONSUMER ASSISTANCE 707 WARNING! The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under-inflation, or excessive load- ing, either separately or in combination, can cause heat buildup and possible tire failure.
Page 711 INDEX...
Page 712 710 INDEX About Your Brakes ......511 Maintaining Your Air Bag System ... .97 Adding Engine Coolant (Antifreeze) .
Page 713 INDEX 711 Disarm The System ..... . .19 Adding Fluid ..... . .661, 662 Tamper Alert .
Page 714 712 INDEX Brake Control System, Electronic ....511 Cargo Compartment Brake Fluid ......687 Luggage Carrier .
Page 715 INDEX 713 Infants And Child Restraints ....101 Compass Variance ......364 Install A LATCH-Compatible Child Restraint .
Page 716 714 INDEX Points To Remember .....657 Power Steering ......508 Pressure Cap .
Page 717 INDEX 715 E-85 Fuel .......564 Block Heater ......491 Economy (Fuel) Mode .
Page 718 716 INDEX Enhanced Accident Response Feature ... .95 Engine Oil ......566 Entry System, Illuminated .
Page 719 INDEX 717 Fuel ........560 Fueling ....... .567 Adding .
Page 720 718 INDEX Hazard Hood Release ......227 Driving Through Flowing, Rising, Or Shallow Hook, Coat......295 Standing Water .
Page 721 INDEX 719 iPod/USB/MP3 Control Lap/Shoulder Belts......66 Bluetooth Streaming Audio ... . .189, 407 Latches .
Page 722 720 INDEX Dimmer Switch, Headlight ....232 Service ......678, 680 Exterior .
Page 723 INDEX 721 Maintenance Schedule ..... .690 Modifications/Alterations, Vehicle ....7 Malfunction Indicator Light (Check Engine) .
Page 724 722 INDEX Pressure Warning Light ....336 ParkSense System, Rear .....251 Recommendation .
Page 725 INDEX 723 Recline .......194 Rearview Mirrors ......138 Power Steering Fluid .
Page 726 724 INDEX Replacement Tires ......547 Energy Management Feature ....78 Reporting Safety Defects .
Page 727 INDEX 725 Pretensioners ......77 Sentry Key Replacement .....17 Rear Seat .
Page 728 726 INDEX Speed Control (Cruise Control)....246 Stow N Go (Fold in Floor) Seats ....204 Starting .
Page 729 INDEX 727 General Information ....536, 542 Tire Safety Information .....524 High Speed .
Page 730 728 INDEX Tips ....... . .584 Uconnect 130 Trailer And Tongue Weight ....578 Operating Instructions Auxiliary Mode .
Page 731 INDEX 729 Vehicle Certification Label ....570 Washer Vehicle Identification Number (VIN) ... . .6 Adding Fluid .
Page 732 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.
Page 733 ® STICK WITH THE SPECIALISTS 16Y531-126-AC 16UF-126-AA Third Edition ©2015 FCA US LLC. All Rights Reserved. First Edition Chrysler is a registered trademark of FCA US LLC. Printed in U.S.A.

Save PDF