Britax 7300/B/2010 Series Instructions For Installation And Use Manual page 27

CARE & MAINTENANCE
C. Engage and disengage the Harness Tongues and Buckles several
times until a strong audible click is heard when inserting the last
tongue.
D. If you still cannot hear a strong audible click after engaging the
Harness Tongues and Buckle, then repeat cleaning several times.
If the Harness Buckle cannot be returned to its original working
condition then contact Britax Childcare Customer Service.
E. Refit the harness buckle to the restraint with the red button facing
out and feeding each 3-bar slide through appropriate slot.
COVER (STYLE MAY VARY)
The restraint has a flame retardant cover which is removable for cleaning. Cleaning instructions are on
the care label attached to the cover. If fluffy cover is fitted then washing cover prior to use will remove
excess fluff.
Drying the Infant Safety Cushion Insert will take additional time as the impact foam will absorb
moisture. Before washing re-engage the hook and loop on the cover and Seat Pad to prevent the 'hook'
damaging the fabric.
The cover has been designed to protect your child when seated in the restraint. Care should be taken if
children either eat or drink while in the restraint as some food or drink products may cause damage or
marking to the cover. Wash or clean immediately.
Do not pull sticky items from covers as the cover may be damaged - soak in water and gently remove.
52
Click
TO REMOVE COVER:
A. Remove the restraint from vehicle.
B. Disengage the harness tongues from the harness buckle.
C. Remove any accessories, pillow, padded insert, shoulder
pads (if fitted).
D. Disconnect shoulder harness straps from Metal Strap
Connector at the rear. Pull the shoulder straps out of the
shoulder strap slots. Note the shoulder slot position.
E. Unhook elastic loops at the back of the restraint and under
the front of the restraint, there are 4 places.
F. Remove the cover while feeding the Crotch Buckle, Harness
Tongues and strap through the lap and crotch strap slots
in the cover. If fitted with a Harness Adjuster Button,
disconnect the cover from the button housing.
Lap slot
Crotch slots
CARE & MAINTENANCE
Metal Strap Connector
Unhook elastic loop at
the back of the top of the
restraint
F
D
E
53