Britax 7300/B/2010 Series Instructions For Installation And Use Manual page 10

HOW TO SETUP
The shoulder straps must be in the slots
which are nearest to the child's shoulders,
but not lower than the child's shoulders.
Shoulder straps must be threaded through the
appropriate shoulder strap slots then over the top
of the bar at rear of restraint.
18
REARWARD FACING
BELT PATH
shown as blue.
ALWAYS OVER THE BAR
Strap Connector
STEPS IN CHANGING SHOULDER
STRAP SLOTS
A. Remove the restraint from vehicle.
B. At the rear of the restraint, remove one of the harness
shoulder straps from metal Strap Connector by slipping
strap through open slot.
C. Pull the shoulder strap through slot.
D. Insert shoulder strap through restraint slot which will
position shoulder strap level with or above the child's
shoulder, then over the metal bar. Ensure that the
shoulder strap passes through the matching slots in
the cover and the restraint body.
HOW TO SETUP
Bar
Pull
straps
19