Britax 7300/B/2010 Series Instructions For Installation And Use Manual page 20

HOW TO SETUP
CONVERT THE RESTRAINT TO CHILD USE MODE (Model with base)
A. Convert the restraint to child use mode by placing one
hand on the top of the restraint and the other hand pulling
the recline latch at the back of the restraint outwards. Then
lift the restraint forward until audible click is heard.
B. Determine whether an upright or reclined position is preferred and adjust if necessary (see below).
C. Place one hand on the front corner of base firmly, while with the other hand lift the recline latch
up to unlock and push back until the restraint is at the desired position. Ensure the recline latch is
engaged into position by pushing on the restraint.
Lift Recline Latch
38
Lift forward
Pull out
FULLY RECLINED
FULLY UPRIGHT CHILD
CHILD USE MODE
USE MODE
CONVERT THE RESTRAINT TO CHILD USE MODE (Model with foot)
A. To convert the restraint to Child use mode (from baby use mode), simply squeeze the foot
downwards to rotate the foot to the Child use - reclined position. The foot will automatically lock
into position.
B. Determine whether an upright or reclined
position is preferred and adjust if
necessary. To adjust the restraint to the
fully upright position, grasp the handle on
the foot, then squeeze the handle outwards
and hold to release the lock. Rotate the
foot fully downwards, then release the
handle to lock the foot in the fully upright
position. The label on the side of the
restraint identifies the Forward-facing and
reclined positions.
C. Always check the foot is securely locked
into position.
Pull
out
HOW TO SETUP
Press Recline Foot Handle to adjust
Rotate
Recline Foot
downwards
Recline
position
indicator
Rotate to
desired position
39