Britax 7300/B/2010 Series Instructions For Installation And Use Manual page 16

HOW TO USE
D. Fit either harness tongue into the
harness buckle followed by the
other tongue until a click is heard.
Should the second tongue not
insert, press the red button and re-
insert the tongues. Ensure secure
engagement by pulling harness
straps.
E. Remove slack from harness lap
straps by pulling shoulder straps.
F. Adjust the harness to a firm but
comfortable fit by pulling the
harness adjustment strap.
G. Re-tighten the Adjustable Upper
Anchorage Strap by pulling the
Adjustment Strap to remove slack
as shown. Roll up the excess strap
tightly so the webbing is thick
enough to be held in the storage
band.
30
Tongue
Buckle
D
Pull to remove
slack from
Shoulder Straps
harness lap
straps
Harness Lap Straps
F
Crotch Straps
Storage
Band
Press
Pull Adjustment
Strap to remove
Roll up excess
slack
strap tightly so the
webbing is thick
enough to be held
in the storage band.
Click
CAUTION: A LOOSE HARNESS IS DANGEROUS.
Make sure that nothing is obstructing harness straps and that
baby's arms and legs are free with the straps in the correct
location as shown right.
Do not use restraint if straps do not tighten and contact Britax
Childcare Customer Service. Refer to back cover for details.
IMPORTANT:
The Padded Insert (if fitted) is designed to snugly fit baby,
providing extra support and comfort it must be used for smaller
babies. Discontinue use when Padded Insert is a tight fit, creates
discomfort for larger babies, or the baby's shoulder reach the
Lower Shoulder Height Marker.
HOW TO USE
Pull to remove slack
from harness straps
31