Table of Contents
Advertisement
LASER (SE955)
The tables below list the symbologies settings for 1D laser scan engine (SE955).
SYMBOLOGY SETTINGS
Laser Engine
Code 11
Check digit verification Decide whether to verify check digits. If the check digit is
Transmit Check Digit
Select Length
Codabar
CLSI editing
NOTIS editing
Select Length
(min/max)
Code 128
GS1-128
(UCC/EAN-128)
ISBT 128
Industrial 25 (Discrete 25)
Select Length
(min/max)
Interleaved 25
Description
incorrect, the barcode will not be accepted.
Disable
One Check Digit
Two Check Digits
Decide whether to include check digits in the transmitted
data.
"Check digit verification" must be enabled.
One or two fixed lengths
Range (1~55)
When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
Decide whether to include start/stop characters in the
transmitted data.
NOTIS Editing is to strip the start/stop characters, i.e. to
disable "Transmit Start/Stop Characters".
One or two fixed lengths
Range (1~55)
Read GS1-128 barcodes with leading FNC1 character.
Read ISBT 128 barcodes.
One or two fixed lengths
Range (1~55)
Appendix II
Default
Enable
Disable
No
4~55
Enable
No
No
4~55
Enable
Enable
Enable
Enable
4~55
Enable
239
Advertisement
Table of Contents
