Table of Contents
Advertisement
MIFARE KEYS
Mifare Keys setting changes the security keys A and/or B for a Mifare tag's data block.
Keys A and B are two keys that enable the RFID reader to access (read or write) a Mifare
tag's data block.
To open Mifare Keys setting page:
1) Open General tabbed page as described in
General tabbed page opens.
2) Tap Mifare Keys button.
Mifare Keys setting page opens.
[Mifare Keys] setting
Edits keys A & B
Assigns the blocks
to apply change
Settings
Key A
Key B
Sector
To perform change to key A and/or B:
1) Launch RFID reader as described in
Descriptions
Assigns new key A, which must be a hex string of 12
bytes.
If it is the other key (key B) that you want to
change, you still need to assign the current key A
here to be able to enact the change.
Assigns new key B, which must be a hex string of 12
bytes.
If it is the other key (key A) that you want to
change, you still need to assign the current key B
here to be able to enact the change.
Sets the blocks to apply the change.
Launch Reader
General tabbed
page.
Shows what each key A
and B currently is.
Tap this button to enact the
change.
Module(s).
Data Capture
Default
--
--
1
(blocks 4, 5,
& 6)
67
Advertisement
Table of Contents
