For Product With Laser; Specific Absorption Rate (Sar) Information - CipherLab RS51 Reference Manual

RS51 Mobile Computer

FOR PRODUCT WITH LASER

This laser component emits FDA / IEC Class 2 laser light at

the exit port. Do NOT STARE INTO BEAM DIRECTLY.
 Do not aim the beam at the eyes.
Any adjustments or performance excluding those specified herein

may result in hazardous laser light exposure.
ENVIRONMENT
Operate the mobile computer at ambient temperatures from -20°C to 50°C and with

humidity range from 10% to 90%.
Store the device at ambient temperatures from -30°C to 70°C and with humidity range

from 5% to 85%.
Charge the device at ambient temperatures from 0°C to 40°C.

This device is built with a dust-proof and splash-proof structure that conforms to

protection class IP67.

SPECIFIC ABSORPTION RATE (SAR) INFORMATION

The product complies with the FCC portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the products can be kept as far as possible from the
user body or set the device to lower output power if such function is available.
Body-worn Operation
This device was tested for typical body-worn operations. To comply with RF exposure
requirements, a minimum separation distance of 10 mm must be maintained between the
user's body and the handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any metallic components.
Body-worn accessories that do not meet these requirements may not comply with RF
exposure requirements and should be avoided.
The SAR test distance is Head (0 mm), Body (10 mm) and Hotspot (10 mm).
FCC SAR Value (Standard limit is 1.6 W/Kg)
USA (1g): Max. 1.52 W/Kg
A minimum separation distance of 0.5 cm must be maintained between the user's body and
the device, including the antenna during body-worn operation to comply with the RF
exposure requirements in Europe. To compliance with RF Exposure requirements in Europe,
third-party belt-clips, holsters or similar accessories used by this device should not contain
any metallic components. The use of accessories that do not satisfy these requirements
may not comply with RF exposure requirements, and should be avoided.
CE SAR Value (Standard limit is 2 W/Kg) EU (10g): Max. 1.48 W/Kg
- 4 -