CP50 Mobile Computer
7) Select your GPS receiver and tap the "Next" command on Softkey bar.
Your GPS receiver may request for a passcode to create a secure connection. Enter a
consistent code on both devices. Sometimes you need to consult your GPS receiver's
documentation for this code.
Once two devices are connected, a dialog prompts.
And Devices tabbed page opens again listing your GPS receiver. If it is paired but not
connected, it is listed under Disconnected label. If it is paired and connected, it is listed
under Connected label. Paired or paired & connected depends on the device's Bluetooth
feature(s) enabled for the mobile computer at the moment.
152
Devices tabbed page reopens.
GPS receiver is paired but not connected.
Reference Manual