CP50 Mobile Computer
DIRECT DATA CONNECTION
"Direct" data connection means "hardwired" data connection between the mobile computer
and a Windows-based PC as opposed to wireless connection. Direct data connection relies
on a serial cable or a USB cable (sometimes plus an auxiliary cradle) between two devices.
Once two devices are "directly" connected with each other by a serial- or USB-cable, they
can sync data with each other, and the mobile computer, more precisely the SD card in it,
can mount the PC as mass storage.
USE CABLE
Direct data connection using a cable:
1) Connect the mobile computer to your PC with a USB
both sides.
2) Power on the mobile computer if you haven't.
3) On the mobile computer, open Start screen, tap Settings | Connections | USB
Connection
USB Connection opens.
4) Select ActiveSync or Mass Storage.
Note:
(1) RS232 serial cable doesn't support ActiveSync.
(2) Mass Storage only mounts the external SD card.
5) Tap the "OK" command on
See
Syncing Tools
Figure 11: Direct Data Connection Using Cable
USE CRADLE
Direct data connection using a cradle:
1) Seat the mobile computer in a Charging and Communication Cradle (hereinafter
"cradle").
40
.
Softkey bar
and subsequent sections to know how to use ActiveSync.
-
or serial-cable. Fix the cable to
to apply the change and quit setting.
Reference Manual