Table of Contents
Advertisement
CP50 Mobile Computer
UPC
UPC-A/UPC-E/UPC-E1
Enable Addons
Addons redundancy
Transmit Check Digit
Convert to UPC-A
UCC coupon extended
code
Transmit Preamble
MISCELLANEOUS
Laser Engine
Miscellaneous Options
Transmit Code ID
AIM CODE ID – CODE CHARACTERS
Code Character
A
C
d
242
Reference Manual
For the default value, the UPC-A and UPC-E are enabled.
Decide whether to decode EAN-8, EAN-13, UPC-E0, UPC-E1,
UPC-A with addons.
Ignore Addons
Decode Only With Addons
Auto-discriminate
When "Auto-discriminate" is applied, decide the number of
times (2~30) of supplementary decoding the same barcode
that makes a valid reading.
Decide whether to include the UPC-A/UPC-E/UPC-E1 check
digit in the data being transmitted.
The UPC-E0/UPC-E1 barcode will be expanded into UPC-A,
and the next processing will follow the settings configured
for UPC-A.
Read UPC-A barcodes starting with digit "5", EAN-13
barcodes starting with digits "99", and UPC-A/GS1-128
Coupon Codes.
UPC-A, EAN-13, and GS1-128 must be enabled first!
Use "Addon Redundancy" to control auto-discrimination
of the GS1-128 (right half) of a coupon code.
Decide whether to include the UPC-A/UPC-E/UPC-E1
preamble System Character (and Country Code) in the data
being transmitted.
Description
Decide whether to include AIM Code ID in the beginning of
data.
none
AIM code ID character
Each AIM Code ID contains the three-character string
"]cm" –
] = Flag Character (ASCII 93)
c = Code Character (see below)
m = Modifier Character (see below)
Code Type
Code 39, Code 39 Full ASCII, Code 32
Code 128, Coupon (Code 128 portion)
Data Matrix
---
Ignore...
10 times
Yes
No
No
System
Character
Default
---
none
Advertisement
Table of Contents
