Status Screen In Sd Card Mode - JVC GY-HM790CHU Instructions Manual

Status Screen
Status Screen in SD Card
Mode
These are the status screens displayed in Media mode (SD Card mode, Media mode).
STATUS 0 Screen
This screen displays the media status or event. It is also used to display warnings only.
STATUS 1 and STATUS 2 Screens
A B C D E
OK
J I H
STATUS 1 Screen
Item
A
OK Mark
B
Resolution
C
Frame Rate/Bit Rate
D
Media
E
Clip Information
F
Time Code (TC)/
User's Bit (UB)
G
Date/Time
F
G K
Appears when an OK mark is added. (A Page 68)
Displays the video image resolution.
(1920 1080, 1440 1080, 1280 720, 720 480, 720 576)
Displays the frame rate and bit rate in pairs.
(60p HQ, 30p HQ, 60i HQ, 60p SP, 30p SP, 60i SP, 50p HQ, 25p HQ, 50i HQ, 50p SP, 25p SP, 50i SP, 24p
HQ, 24p SP, 50i, 60i)
Displays the media slot (A or B) of the currently played clip.
A key mark appears when the write-protect switch of the SDHC card is set.
Displays current clip number/total number of clips.
Displays the time code (hour : minute : second : frame) or user's bit data.
TC : Time code
UB : User's bit
The framing mode display for the time code is as follows.
0 0 : 0 0 : 0 0 : 0 0
Colon (:) for non-drop frames
Dot (.) for drop frames
Memo :
● You can turn ON/OFF the display using [TC/UB] of [Status Display] in the [LCD/VF] menu.
(A Page 91)
● You can select whether to display the time code or user's bit using the [TC DISPLAY] switch on the inner
panel of the LCD monitor.
Displays the date/time that is recorded on the currently played SDHC card.
Note :
● The date/time display style can be specified in [LCD/VF] menu B [Status Display] B [Date Style]/
[Time Style]. (A Page 91)
A B C D E
OK
J I H
STATUS 2 Screen
Description
F
G