Full Auto Item - JVC GY-HM790CHU Instructions Manual

FULL AUTO Item

This is used to set specific functions to the auto mode when the [FULL AUTO] switch of the camera recorder is set to ON .
Item Setting Values
Gain
SW Set
ALC
Iris Control Off
Auto
Shutter SW Set
EEI
White Balance
SW Set
FAW
Bars Menu Set
Off
Audio SW Set
Auto
SW Set : Sets gain according to the [GAIN] selection switch.
ALC : Sets gain to the ALC (forced auto) mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at ALC and cannot
be selected. (A Page 131)
Off : Iris control is not performed.
Auto : Sets iris control to the forced auto mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at Auto and cannot
be selected. (A Page 131)
● When the iris mode switch of the lens is set to A (auto), the iris is fixed at the point of time
when this item is switched from Auto to Off .
SW Set : Sets shutter according to the switch.
EEI : Sets shutter to the forced auto mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at EEI and cannot
be selected. (A Page 131)
SW Set : Sets white balance according to the [WHT.BAL.] selection switch.
FAW : Sets white balance to the forced auto mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at FAW and cannot
be selected. (A Page 131)
Menu Set : Sets color bar output according to the menu settings (via switch operation).
Off : Sets color bar output to the forced Off mode.
Memo :
● When the remote control unit comes with an FAS function, this is fixed at Off and cannot be
selected. (A Page 131)
SW Set : Sets the audio recording level according to the switch.
Auto : Sets the audio recording level to the forced auto mode.
Function