Assigning Functions To User Buttons - JVC GY-HM790CHU Instructions Manual

Note :
● During Clip Review, only the [CANCEL] and [REC]
buttons are enabled. Press the [CANCEL] button to
cancel clip review and return to STBY (recording
standby) mode. Press the [REC] button to cancel clip
review and enter recording mode. It will take some time to
start recording after the button is pressed.
● When the last clip is less than 5 seconds, the whole clip is
played back.
● Only video clips in the currently selected slot can be
reviewed.
● When there are no clips in the selected slot, Clip Review
function is disabled.
● Clip Review is unavailable when Clip Continuous Rec is
paused (STBYC, yellow text). To operate Clip Review,
use the [CANCEL] button to set to STBYC (white text)
first. (A Page 59)
● Clip Review is unavailable when the camera recorder is
connected to an external equipment and the equipment is
in recording state.
Assigning Functions to
User Buttons
You can assign functions to the [USER1], [USER2], and
[USER3] buttons.
By assigning functions to the [USER1], [USER2], and
[USER3] buttons, the usability of the camera recorder is
enhanced.
1
Assign functions to the [USER1], [USER2], and
[USER3] buttons from the menu. (A Page 79)
Set each of the [USER1], [USER2], and [USER3] items in
the [Main Menu] B [Camera Function] B [Switch Set] menu.
Memo :
● Operations of the [USER1], [USER2], and [USER3]
buttons are interlocked with the menu settings.
● When the menu screen is displayed, these buttons
function as the menu operation buttons.
(A Page 70 [Basic Operations in Menu Screen])
[USER1], [USER2], [USER3]
Buttons