Camera Function Menu - JVC GY-HM790CHU Instructions Manual

Menu Display and Detailed Settings

Camera Function Menu

* Default values are indicated in bold characters.
Item
Bars On
Off
Shutter EEI
Variable
Step
AE LEVEL +3 to +1,
Normal,
-1 to -3
AE Speed Fast
Middle
Slow
ALC Limit
18dB
12dB
6dB
Auto Iris Limit F5.6, F4, F2.8, F2,
(OPEN)
F1.6,
F1.4
Auto Iris Limit F16,
(CLOSE)
F11,
F8, F5.6,
EEI Limit
4F-stop
3F-stop
2F-stop
Smooth Trans Fast
Middle
Slow
Off
Switch Set... For specifying the switch settings of the camera recorder. (A Page 79)
FULL AUTO... For specifying settings when the [FULL AUTO] switch of the camera recorder is set to ON . (A Page 81)
Setting Values
For setting whether to output color bars.
On
Off
Memo :
● When the [FULL AUTO] switch on the camera recorder is set to ON , and [Bars] in the
[FULL AUTO] menu is set to Off , this item is set to Off automatically. (A Page 81)
For specifying shutter-related settings.
Use this item to set to Step (fixed value) or Variable when operating with the cross-
shaped button (JK) on the right of the camera recorder. During automatic control, this is
set to EEI .
EEI
Variable : Sets to variable scan. Use this setting such as when shooting a PC monitor.
Step
For setting the convergence level during AE (Auto Exposure).
This can also be adjusted using the cross-shaped button (H I) on the right of the camera
recorder.
For setting the convergence speed during AE (Auto Exposure).
For setting the maximum gain value of ALC , which electrically boosts the sensitivity level
according to the brightness automatically.
18dB
12dB
6dB
For setting the limit value of the OPEN end when auto iris is enabled.
For setting the limit value of the CLOSE end when auto iris is enabled.
For setting the shutter speed control range when EEI is enabled.
4F-stop : Moves iris control by 4 f/stops in EEI.
3F-stop : Moves iris control by 3 f/stops in EEI.
2F-stop : Moves iris control by 2 f/stops in EEI.
For setting the shock reduction function, which slows down the sudden change when
switching with the [GAIN] or [WHT.BAL.] selection switch.
However, this function is disabled when the [FULL AUTO] switch of the camera recorder is
set to ON , or when switching the gain selection switch while ALC is set.
Fast
Middle
Slow
Off
: Color bars are output.
: Color bars are not output.
: Sets to automatic control.
: Sets to step shutter, which switches the shutter speed by a fixed value.
: Sets the maximum ALC gain value to +18 dB.
: Sets the maximum ALC gain value to +12 dB.
: Sets the maximum ALC gain value to +6 dB.
: Runs the Smooth Trans function at high speed.
: Runs the Smooth Trans function at medium speed.
: Runs the Smooth Trans function at low speed.
: Deactivates the Smooth Trans function.
Function