Rec Mode Menu; Clip Set Menu - JVC GY-HM790CHU Instructions Manual

Menu Display and Detailed Settings
Record Set Menu
(continued)

Rec Mode Menu

Item
Rec Mode
Frame Rate
When [Frame & Bit Rate] is
30p (HQ)
When [Frame & Bit Rate] is
24p (HQ)
When [Frame & Bit Rate] is
25p (HQ)
Pre Rec Time

Clip Set Menu

* Default values are indicated in bold characters.
Item
Clip Name Prefix
Reset Clip Number
Setting Values
Normal
Pre Rec
Clip Continuous
Variable Frame
60, 48, 40,
30,
24, 20, 15, 12, 10
60, 48, 40, 30,
24,
20, 15, 12, 10
50, 40,
25,
20, 15, 12.5, 10
5sec,
10sec, 20sec
Setting Values
xxxG
(The default value of xxx
is the last three digits of
the serial number.)
^
For selecting the record mode for recording to the SDHC card. (A Page 58)
Memo :
● [Variable Frame] is selectable when [Camera Resolution] is set to
1280x720 , and [Frame & Bit Rate] is set to 30p (HQ) , 24p (HQ) , or
25p (HQ) .
For setting the recording [Frame Rate] when [Rec Mode] is set to
[Variable Frame].
Memo :
● When [AE LEVEL] in the [Main Menu] B [Camera Function] B [Switch Set]
menu is set to AE LEVEL/VFR , you can use the cross-shaped button (H I)
to select the frame rate during Variable Frame Rec. In modes other than
Variable Frame Rec, the cross-shaped button (H I) functions as the [AE
LEVEL] setting button. (A Page 80)
● When [Frame Rate] is changed and the shutter speed becomes a value that is
invalid for the current [Frame Rate], the shutter speed is automatically
changed to match the current [Frame Rate].
For setting the pre-recording time when [Rec Mode] is set to Pre Rec .
For setting the first four characters of the name of the clip file to be recorded to
the SDHC card.
Enter any of the 38 characters including alphabets (upper case), numbers
(0 to 9), "_" (underscore), and "-" (hyphen) using the software keyboard.
(A Page 71 [Text Input with Software Keyboard])
For assigning a new number to (Clip Number) by resetting it (0001). Select
[Reset] and press the Set button (R) to reset the number.
When other clips exist on the SDHC card, the smallest available number is
used after reset.
Example: If the [Clip Name Prefix] is ABCD , and ABCD0001 already
exists on the SDHC card, ABCD0002 will be assigned.
Function
Function