Error Displays And Actions - JVC GY-HM790CHU Instructions Manual

Others

Error Displays and Actions

Alarm displays on the LCD monitor and viewfinder screens, as well as the tally lamps and alarm tones are output as follows
according to the alarm status.
Memo :
● This camera recorder makes use of a microcomputer. Noise interference from external sources may prevent it from functioning
properly. When this occurs, turn off and on the power of the camera recorder again.
Error Display
Status Screen
Thumbnail Screen
TURN POWER OFF
TURN BACK ON
LATER
INCORRECT MEDIA Incorrect Media [***]
[***]
INVALID MEDIA Invalid Media [***]
[***]
FORMATTING Formatting Required
REQUIRED
[***]
RESTORE MEDIA Restore Media [***]
[***]
NO MEDIA
^
^
NO CLIP
REC INHIBITED
CLOSE SLOT
COVER
LOST MEDIA INFO [*] Lost Media Info [*]
Menu Screen
^ System error.
* The alarm sounds and the tally lamp blinks
about once every second.
SDHC card is not supported (a type other than
Class 6/10). (***: A, B, A/B)
● An irrecoverable error is detected.
● SDHC card reading/writing error.
(Faulty SDHC card) (***: A, B, A/B)
SDHC card is not formatted using this camera
[***] recorder. (***: A, B, A/B)
● SDHC card requires restoring.
● Recording is not successfully completed.
(Temporary blackout/card removed)
(***: A, B, A/B)
^
[REC] button is pressed when an SDHC card
is not inserted.
No Media No SDHC card is found in Media mode or
when the thumbnail screen is displayed.
No Clips No clips are found on the inserted SDHC card
in Media mode or when the thumbnail screen
is displayed.
^ No viewable clips are found on the card for
Clip Review.
^ [REC] button is pressed when the write-protect
switch of the SDHC card is set.
● Recording to the SDHC card is started with
^
the cover of the selected slot left open.
● The cover is opened while recording is in
progress.
● Card is removed while recording is in
progress.
● Card is removed while formatting is in
progress.
● Card is removed while restoring is in
progress.
● Card is removed while adding the OK mark.
● Card is removed while writing a setup file.
● Card is removed while deleting a clip. (*: A, B)
Status Action
Turn off the power, and turn it on again.
If the error persists, consult your nearest JVC
dealer.
Insert an SDHC card that is compliant with
Class 6/10.
(A Page 31)
Replace the SDHC card with a new one.
Format the card using this camera recorder.
(A Page 33)
Restore the card using this camera recorder.
(A Page 34)
Insert an SDHC card. (A Page 31)
Insert an SDHC card. (A Page 31)
Insert an SDHC card that contains playable
clips. (A Page 31, 61)
Insert an SDHC card that contains clips that
can be reviewed. (A Page 31, 56)
Turn off the write-protect switch of the SDHC
card, or insert a recordable SDHC card.
(A Page 31)
Close the cover of the SDHC card slot.
(A Page 32)
Restore the card using this camera recorder.
(A Page 34)