Setting The Nd Filter - JVC GY-HM790CHU Instructions Manual

Setting the ND Filter

Use the ND filter to keep the lens aperture in the appropriate
range.
Switch according to the brightness of the object. When the
switch is changed, the position of the switched ND filter is
displayed on the LCD monitor and viewfinder screens.
(STATUS 1 Screen)
[ND FILTER]
Switch
1280x720 30/24 fps
24p HQ
A
100min
B 100min
STBY
282min
Displays the position of the ND filter
[1/16] Reduces the amount of incident light to 1/16. Select
this for extremely bright outdoor environments.
[1/4] Reduces the amount of incident light to 1/4. Select
this for bright and sunny outdoor environments.
[OFF] Select this for indoor and dark outdoor environments.
Memo :
● The display of the ND filter position is set to Off by
default. To display the position of the ND filter, set [Filter]
in the [LCD/VF] B [Status Display] menu to On .
(A Page 90)
● It is recommended to use the ND filter to set the lens
aperture to less than F5.6.
0 0 : 0 0 : 0 0 : 0 0
MAX 123%
MIN 45%
S.DTL
B -3
ND1/16 A<3200K>