Adjusting The Monitor Speaker - JVC GY-HM790CHU Instructions Manual

Changing the Display Style
You can change the display style of the date/time on the
menu.
Memo :
● To perform the settings while looking at the monitor
screen connected to the video signal output terminal, set
[Analog Out Char.] or [SDI Out Char.] in the [A/V Out]
menu to On . (A Page 92)
Setting the date style (Date Style) (A Page 91)
A
Select [LCD/VF] menu B [Status Display] menu B
[Date Style].
B
Select the date display style.
[Setting values : YMD (year, month, day), MDY (month,
day, year), DMY (day, month, year)]
C
Press the Set button (
Setting the time style (Time Style) (A Page 91)
A
Select [LCD/VF] menu B [Status Display] menu B
[Time Style].
B
Select the time display style.
[Setting values : 12hour (12 hour display), 24hour (24
hour display)]
C
Press the Set button (
Date/Time Display in Different Operation
Modes
During Camera mode Date/time of the built-in clock is
displayed.
During AUX mode
(U model)
During Media mode Shooting date/time of the clip being
(SD Card mode) played back is displayed.
During Media mode Date/time is not displayed.
(IEEE1394 mode)
R
).
R
).
Adjusting the Monitor
Speaker
The monitor speaker can be rotated 180 degrees.
Adjust according to the position of your ear.
[MONITOR] Level Adjustment Knob
Memo :
● Adjust the volume of the monitor speaker with the
[MONITOR] level adjustment knob at the side control
panel on the right of the camera recorder. Various warning
alarm tones may also be output repeatedly. (A Page 135)
Note :
● The rotation angle of the monitor speaker is 180 degrees.
Do not over-rotate the monitor speaker.
180 Degrees Rotation
Monitor
Speaker