Shooting
Setting Zebra Pattern
When the luminance level range for displaying zebra patterns
is specified, diagonal lines (zebra pattern) are displayed at
areas with the specified luminance levels during shooting.
Specify the brightness (luminance) level
range for displaying zebra pattern
[ZEBRA ON/OFF] Switch
Specify the upper (Top1, Top2) and lower (Bottom1,
Bottom2) limits of the luminance level.
1
Set the zebra display pattern.
● Select the display pattern in [LCD/VF] menu B
[Shooting Assist] B [Zebra].
[Zebra1] Display
2
Specify the brightness (luminance) level range for
displaying zebra pattern.
Specify the upper (Top1, Top2) and lower (Bottom1,
Bottom2) limits of the luminance level in [LCD/VF] menu B
[Shooting Assist] B [Zebra].
Item
Settings
Zebra
Zebra display pattern
Top1
Upper luminance limit for
displaying [Zebra1]
Bottom1
Lower luminance limit for
displaying [Zebra1]
Top2
Upper luminance limit for
displaying [Zebra2]
Bottom2
Lower luminance limit for
displaying [Zebra2]
[Zebra2] Display
Options
1Pattern
2Patterns
5 % - 100 %, Over
(in 5 % increments)
0 % - 100 %
(in 5 % increments)
5 % - 100 %, Over
(in 5 % increments)
0 % - 100 %
(in 5 % increments)
Memo :
● Top2 and Bottom2 cannot be set if [Zebra] is set to
1Pattern .
● When the specified range of two zebra patterns overlaps,
the two zebra patterns overlap and are displayed in a grid.
3
Display the zebra pattern.
Set the [ZEBRA ON/OFF] switch in front of the camera
recorder to ON to display the zebra pattern at the specified
range.
Zebra Pattern