Overview Of Cable Connections - Mobotix D14D Manual

58
/132
Connection of additional
devices (via MxBus/Mini
USB): Max. environmental
temperature 50°C (122°F)
D14D Camera Manual: Mounting

2.3.2 Overview Of Cable Connections

The following cables can be used with the D14:
• MOBOTIX Ethernet cable: This MOBOTIX cable is pre-installed at delivery
and is intended for direct connection to a network outlet. If the D14D is
to be installed outdoors, the MOBOTIX MX-Patch-Box should be used
(optional accessory).
• MOBOTIX USB cable with Mini USB connector: This MOBOTIX cable
provides the required impermeability, even in adverse weather conditions,
and thereby prevents corrosion of the connections.
• Multi-wire cable for MxBus connections: Additional MOBOTIX modules
can be connected via this multi-wire cable in the future. The wires of this
cable are led along the bottom of the camera and then pushed through
the sealing membranes and into the cable guides.
MxBus
Only MOBOTIX cables may be used for the Ethernet and USB connection to ensure
that the cable cover remains permanently sealed.
Appliances with a combined maximum power consumption of 2.5 W may be connected
to the MxBus connector. If additional devices are connected to the MxBus connector
and to the Mini USB connector, the power consumption of all connected devices may
not amount to more than 4 W.
If additional modules are connected, which in total consume more than 1 W, the maximum
environmental temperature is limited to 50°C (122°F).
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
Mini USB
Caution
Ethernet
for LAN
Note
www.mobotix.com • sales@mobotix.com
Ethernet
Mini USB