Table of Contents
Advertisement
Important: Do not place the label on the blade server itself or in any way block the
ventilation holes on the blade server.
Related publications
This Hardware Maintenance and Troubleshooting Guide is provided in Portable
Document Format (PDF). It contains information to help you solve the problem
yourself or to provide helpful information to a service technician.
In addition to this Hardware Maintenance and Troubleshooting Guide, the following
documentation is provided in PDF on the IBM Documentation CD that comes with
your BladeCenter T unit:
v Safety Information: This document is in PDF on the IBM Documentation CD. It
v Installation and User's Guide: The Installation and User's Guide contains general
v BladeCenter T Rack Installation Instructions: These documents contain instructions
v
v Management Module User's Guide: This document contains instructions for using
Additional publications might be included on the IBM Documentation CD that
comes with your BladeCenter T unit.
CMM
1
contains translated caution and danger statements. Each caution and danger
statement that appears in the documentation has a number that you can use to
locate the corresponding statement in your language in the Safety Information
document.
information about the chassis, including how to install supported optional
devices.
for installing the BladeCenter T unit in a 4-post and 2-post rack.
Note: The BladeCenter T can also be installed in some xSeries and pSeries racks,
such as the IBM Netbay42 Enterprise Rack Model 9308. See the installation
instructions that come with those racks.
Management Module Installation Guide: This document contains instructions for
installing an IBM management module option in a BladeCenter T unit and
creating the initial configuration.
the web interface to configure the management modules in a BladeCenter T unit.
CMM
2
User
label
Chapter 1. General information
3
Advertisement
Table of Contents
