Table of Contents
Advertisement
Complete the following steps to replace the front bezel air filter in the BladeCenter
T unit:
1. Remove the bezel from the front of the BladeCenter T unit (see "Removing the
2. Place the bezel front-side down on a work surface.
3. Remove the air-filter retainer by pulling the retainer upwards and off the
4. Remove the old air filter from the bezel frame.
5. Remove the new air filter from its packaging.
42
BladeCenter T Type 8267: Hardware Maintenance Manual and Troubleshooting Guide
Retainer
Air filter
Bezel
bezel assembly" on page 40 for instructions).
ball-stud fasteners on the bezel.
CM
M
1
CM
M
2
ES D
Advertisement
Table of Contents
