Serial Ports; Parallel (Printer) Port; Ethernet Transceiver Interface - Motorola MVME167 Series Installation Manual

Serial Ports

The serial ports support standard baud rates of 110 to 38.4K baud.
Serial
Function
Port
1 Minimum
2
and Full
3
4 Full
All four serial ports use EIA-232-D drivers and receivers located on
the main board, and all the signal lines are routed to the I/O
connector.
A functional description of the Serial Port Interface starts on page
2-18.

Parallel (Printer) Port

The 8-bit bidirectional parallel port may be used as a Centronics-
compatible parallel printer port or as a general parallel I/O port.
A functional description of the Printer Port interface starts on page
2-20.

Ethernet Transceiver Interface

The Ethernet transceiver interface is located on the MVME167, and
the industry standard connector is located on the MVME712X
transition module.
A functional description of the Ethernet Interface starts on page
2-21.
Synchronous/
Asynchronous
Asynchronous RXD, CTS, TXD, and RTS
Asynchronous RXD, CTS, DCD, TXD, RTS,
and DTR
Both RXD, CTS, DCD, TXD, RTS,
and DTR
General Description
Signals
Synchronous up
to 64 k bits per
second
2
Bit Rates
2-3