Motorola MVME167 Series Installation Manual page 53

Table 3-1. Startup Overview (Continued)
Stage What you will need to do...
4 Install adapter boards and transition modules.
Set jumpers on the transition module(s).
Connect and install the MVME712X
transition module.
Connect and install the P2 adapter board.
5 Connect peripherals.
Connect and install any optional SCSI
device cables.
Connect a console terminal to the
MVME712X.
Connect any other optional devices or
equipment you will be using, such as
serial or parallel printers, host computers,
etc.
6 Complete the installation.
Reassemble chassis.
Reconnect AC power.
Overview of Startup Procedure
Refer to...
Transition
Modules and
Adapter Boards
Overview
Installing
Transition
Modules and
Adapter Boards
The userÕs manual you
received with your
MVME712X
Connecting
Peripherals
You may also wish to
obtain the Single Board
Computer SCSI Software
UserÕs Manual
EIA-232-D
Interconnections
Port Numbers
Disk/Tape
Controller Data
The userÕs
manual you
received with
your chassis
On
page...
3
3-16
3-19
3-19
E-1
5-9
B-1
3-23
3-3