Ethernet Controller; Ethernet Aui Ports Signal Description; Figure 4-5 Ethernet Aui Port Connector - Motorola M68360QUADS-040 User Manual

Table of Contents

Advertisement

Freescale Semiconductor, Inc.
SIMM4 to SIMM1 - These four bits, encode the data identifying the DRAM SIMM connected to the
M68360QUADS-040. For the various DRAM types supported, refer to TABLE 4-1.
BKINT* - When active '0', indicates that the last level 7 interrupt (NMI) was generated by the
Hardware Breakpoint logic.
OPT0* - When active '1', indicates that switch #5 in DSW1 is in ON position
OPT1* - When active '1', indicates that switch #4 in DSW1 is in ON position
OPT2* - When active '1', indicates that switch #3 in DSW1 is in ON position
4.11.6

Ethernet Controller

There are TWO ethernet ports on the M68360QUADS-040 implemented via SCC1 and SCC2 of the
QUICC.
The first Ethernet port is implemented by connecting SCC1 to Motorola's MC68160 EEST device. The
MC68160 provides two Ethernet interfaces: AUI (P3) and Twisted-Pair (P4). The connection between the
MC68160 and the QUICC is straight forward, and does not require external glue logic.
The second Ethernet port is implemented by connecting SCC2 to AMD's SIA (Am7992) device. In this
case however, only AUI port is implemented via P5.
To support other uses of SCC2, it's signals are available also at the expansion connectors and the SIA
(U4) is mounted on a socket. That way the SIA can be removed freeing SCC2 signals for other use via the
expansion connector - P11.
4.11.6.1

Ethernet AUI Ports Signal Description

The AUI port connectors P3 and P5 are 15 pin, female, D-type connectors as shown in FIGURE 2-6.
The list below describes the port signals. The directions 'I', 'O', and 'I/O' are relative to the M68360QUADS-
040 board. (I.E. 'I' means input to the M68360QUADS-040)
ACX+ ( I ) - Collision Input (positive).
ATX+ ( O ) - Transmit Data (positive).
ARX+ ( I ) - Receive Data (positive).
ACX- ( I ) - Collision Input (negative).
ATX- ( O ) - Transmit Data (negative).
ARX- ( I ) - Receive Data (negative).
M68360QUADS-040 Hardware User's Manual

FIGURE 4-5 Ethernet AUI Port Connector

GND
1
ACX+
2
ATX+
3
GND
4
5
ARX+
GND
6
N.C.
7
GND
8
For More Information On This Product,
Go to: www.freescale.com
FUNCTIONAL DESCRIPTION
9
ACX-
10
ATX-
11
GND
12
ARX-
13
+12V
14
GND
15
N.C.
36

Advertisement

Table of Contents
loading

Table of Contents