Yamaha YZ250N Owner's Service Manual page 412

FRONT BRAKE AND REAR BRAKE
2. Air bleed:
9Brake system
Refer to "BRAKE SYSTEM AIR BLEED-
ING" section in the CHAPTER 3.
3. Inspect:
9Brake fluid level
Fluid at lower level Fill up.
Refer to "BRAKE FLUID LEVEL INSPEC-
TION" section in the CHAPTER 3.
4. Install:
[Front]
9Diaphragm
9Master cylinder cap 1
9Screw (master cylinder cap) 2
[Rear]
9Diaphragm
9Reservoir tank cap 1
9Bolt (reservoir tank) 2
cC
After installation, while pulling the lever in
or pushing down on the pedal, check
whether there is any brake fluid leaking
where the union bolts are installed respec-
tively at the master cylinder and caliper.
A Front
B Rear
5. Install: (rear brake only)
9Protector 1
9Bolt (protector) 2
5-26
CHAS
2 Nm (0.2 m•kg, 1.4 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)
7 Nm (0.7 m•kg, 5.1 ft•lb)