Table of Contents
Advertisement
FRONT FORK INSPECTION
3. Adjust:
9Drive chain slack
Drive chain slack adjustment steps:
9Loosen the axle nut 1 and locknuts 2.
9Adjust
adjusters 3.
To tighten
To loosen
9Turn each adjuster exactly the same amount
to maintain correct axle alignment. (There are
marks a on each side of chain puller align-
ment.)
NOTE:
Turn the adjuster so that the chain is in line
with the sprocket, as viewed from the rear.
cC
Too small chain slack will overload the
engine and other vital parts; keep the
slack within the specified limits.
9Tighten the axle nut while pushing down the
drive chain.
9Tighten the locknuts.
EC36C000
FRONT FORK INSPECTION
1. Inspect:
9Front fork smooth action
Operate the front brake and stroke the
front fork.
Unsmooth action/oil leakage
replace.
3-26
INSP
ADJ
chain
slack
by
Turn adjuster 3 3 counter-
clockwise.
Turn adjuster 3 3 clockwise
and push wheel forward.
Axle nut:
125 Nm (12.5 m•kg, 90 ft•lb)
turning
the
Repair or
Hide quick links:
Advertisement
Table of Contents
